Modern office equipment requires flexibility in connection, and the model HP Laser 107wr is no exception. This compact laser printer has become a popular choice for small offices and home use due to its reliability and wireless support. However, initial setup of the router connection often raises questions for users who have previously used only wired connections.
Wireless connectivity eliminates the need for unnecessary cables and allows you to print documents from multiple devices on the network simultaneously. Proper configuration network parameters guarantees stable operation of the device even with large print volumes. In this article, we'll cover in detail all available methods for activating the Wi-Fi module, from automatic utilities to manual configuration via the control panel.
Before starting the procedure, make sure your router is working properly and is distributing internet, and that the printer is plugged into a 220V power source. It is important to understand that HP Laser 107wr only supports the 2.4 GHz range, so modern dual-band routers must have this standard network activated. Ignoring the 2.4 GHz frequency requirement is the most common reason why a printer cannot be found in the list of available networks.
Equipment preparation and compatibility testing
The first step is a visual inspection of the device and preparation of the work area. Make sure the cartridge is installed, the protective tape is removed, and the paper tray is loaded. The printer should be located within a strong signal range, ideally no more than 5-7 meters from the access point, especially if there are any supporting walls between them.
Check the indicators on the control panel. If the wireless button Wireless Flashing blue means the module is active, but a connection to the router has not yet been established. A lit indicator indicates a successful connection, while an off indicator indicates wireless mode is disabled.
You also need to know your network settings. You will need the exact network name (SSID) and its password. The password is case-sensitive, so carefully check your uppercase and lowercase letters. If you use complex passwords with special characters, it's best to write them down in advance or copy them to your computer's clipboard to avoid typing errors.
- 📶 Make sure your router is broadcasting the 802.11 b/g/n (2.4 GHz) network.
- 🔌 The printer must be connected to a power source and ready to use (not in sleep mode).
- 📱 Prepare the device (PC, smartphone, or tablet) from which the setup will be performed.
⚠️ Note: If your router uses the SSID hiding feature (invisible network), automatic configuration methods may not work. In this case, you will need to manually enter the network name through specialized software or the control panel.
WPS method: quick connection without entering a password
The easiest way to activate the connection is through technology WPS (Wi-Fi Protected Setup). It allows you to transfer network credentials from your router to your printer with a simple press of a button, eliminating the risk of typing a password incorrectly. This method works if your router supports this feature and it's enabled.
To begin, press and hold the wireless button on the printer for a few seconds until the lights start flashing. Then, within two minutes, press the WPS button on your router. It's usually labeled with the appropriate abbreviation or has a key/lock icon.
The data exchange process will take about a minute. During this time HP Laser 107wr will search for the network and attempt to log in. If the blue indicator lights up on the control panel Wireless, which means the connection has been established successfully. After this, you can proceed to installing the drivers.
What to do if WPS doesn't work?
If the lights continue to flash or go out, the WPS feature on your router may be disabled in the security settings or have timed out. Try repeating the process closer to the router or use the USB cable setup method.
It's worth noting that some providers and router models disable WPS by default for security reasons. If the router button isn't responding or the printer isn't seeing a signal, check the router settings through the web interface. Sometimes you may need to manually enable WPS in the wireless network section.
Setup via USB cable and HP Smart software
If automatic connection isn't possible, the most reliable method is to use a temporary USB connection. To do this, you'll need a USB 2.0 Type-B (printer) cable and the driver package installed on your computer. Official software HP Smart or a full driver package from the manufacturer's website will automatically transfer Wi-Fi settings from your PC to the printer.
Run the driver installation and follow the on-screen instructions. When prompted to select a connection type, select "Wireless Connection." The utility will then prompt you to connect the device via cable. After connecting the printer to the computer, the program will scan the list of available networks and transfer the selected settings to the device's memory.
☑️ USB Setup Checklist
Once the settings have been successfully transferred, the printer will disconnect the USB printing connection and switch to network mode. The Wi-Fi indicator should turn solid blue. You can now remove the temporary USB cable and print from any device on the same network.
It's important that the computer and printer are on the same subnet during setup. If you're using a corporate network with a complex VLAN structure or client isolation, this method may require the intervention of a system administrator to grant exceptions.
Manual configuration via control panel
Model HP Laser 107wr The system does not have a full display, so it is controlled using a combination of buttons and LED indicators. For manual network setup without a computer, you can use the configuration mode, activated by long-pressing the button. Wireless in combination with the cancel button.
However, a more effective method for "blind" tuning is to use the mode Direct or creating a temporary access point by the printer itself, if this function is supported by the current firmware version. In most cases, Laser 107wr It is preferable to use the WPS or USB method, as navigating the menu without a screen is extremely difficult.
If you still decide to use software tools to manually configure the IP address, you may need a utility HP Printer AssistantThis allows you to access the device's web interface (EWS) by entering its IP address in a browser. Advanced TCP/IP settings are available here.
| Parameter | Description | Recommended value |
|---|---|---|
| IP Address | A unique address on the network | Static (outside DHCP range) |
| Subnet Mask | Subnet mask | 255.255.255.0 |
| Gateway | Gateway (router) address | 192.168.0.1 or 192.168.1.1 |
| DNS Primary | Primary name server | 8.8.8.8 (Google) or router address |
⚠️ Important: When manually setting a static IP address, ensure the selected address is not already in use by another device on the network. IP address conflicts will result in loss of connection to the printer and network instability.
Installing drivers and completing configuration
Once the printer is connected to Wi-Fi, the operating system may automatically detect it and install basic drivers. However, for full functionality of all features, including toner level monitoring and scanning (if using an MFP model), it is recommended to install the full software.
Go to the official HP support site and find the download page for your model. 107w or 107wrDownload the latest driver for your version of Windows or macOS. During the installation process, select "Network connection" or "Wireless connection."
The installer will find the device on the network using its IP address. If your computer doesn't see the printer, check if they are connected to the same Wi-Fi network. Sometimes antivirus software or firewalls can block the detection of new devices, so you may want to temporarily disable them during the installation.
After installation is complete, perform a test print. This will confirm that data is being transferred correctly from your computer to the printer wirelessly. Also, check the cartridge status in your operating system's printer control panel.
Diagnostics and solution
During operation, situations may arise where the printer becomes unavailable. This is most often due to a change in the router's IP address (DHCP lease time) or an update to the Wi-Fi security settings. If the indicator Wireless blinking, try rebooting the router and printer at the same time.
If the problem persists, reset the printer's network settings. This usually requires pressing and holding the wireless and cancel buttons simultaneously for 5-10 seconds until all lights flash. After this, you'll need to repeat the connection process.
- 🔄 Restart your router if your printer stops responding to print requests.
- 📡 Check if your Wi-Fi password or encryption type has changed (it should be WPA2/WPA3).
- 🖥️ Uninstall the old driver from the system before installing the new version if you experience print queue errors.
⚠️ Note: Router interfaces and printer firmware versions may be updated. If standard methods don't work, check your ISP or router manufacturer's documentation for current network security requirements.
Frequently Asked Questions (FAQ)
Can HP Laser 107wr be connected to a 5GHz network?
No, this printer model is equipped with a Wi-Fi module that only supports the 802.11 b/g/n standard in the 2.4 GHz band. To connect, make sure your router is broadcasting a 2.4 GHz network.
What should I do if the printer is not found during driver installation?
Make sure your computer and printer are connected to the same Wi-Fi network. Check to see if Windows Firewall or antivirus software is blocking network discovery. Try temporarily using a USB cable for initial setup.
How do I find the IP address of my HP 107wr printer?
The easiest way is to print a network configuration report. This is usually done with a button combination on the control panel (hold the Cancel or Wireless button for a few seconds; consult the manual for the exact combination, as it may vary). You can also see the IP address in the list of connected devices in the router's web interface.
Does the HP Laser 107wr work with macOS and Linux?
Yes, the device supports printing from macOS computers and various Linux distributions. For macOS, drivers are often installed automatically via AirPrint. For Linux, you may need to install a package. hplip.