Modern office devices require mobility, and HP Laser 135w is no exception. This compact laser printer is often purchased for small workgroups or home offices, where the absence of unnecessary cables is crucial. However, initial setup of the wireless connection can be challenging for users accustomed to a traditional wired connection.
The main difficulty lies in the fact that WPS protocol, which is supposed to make life easier, doesn't work reliably on all routers. Furthermore, device drivers sometimes don't "see" the printer over the air without first connecting it via USB. In this article, we'll cover all the configuration details, from a hard reset to the intricacies of working with HP Smart.
You'll learn how to properly prepare your network, avoid IP address conflicts, and ensure reliable printing from mobile devices. We'll cover both standard Windows tools and specialized utilities that are often overlooked but significantly simplify the process.
Preparatory stage and equipment testing
Before proceeding with the software part, it is necessary to ensure that the device is physically in good working order and the infrastructure is ready. Wireless network The printer must be working reliably, and the router must broadcast a signal at 2.4 GHz, as this model does not support the 5 GHz standard. Make sure the printer is plugged in and the power indicator is solid.
It's important to check that the cartridge is installed correctly and the protective tape is removed. If the device is brand new, it will need time to warm up and calibrate. During this time, the control panel may flash, which is normal.
⚠️ Important: Make sure your router doesn't use MAC address filtering. If this feature is enabled, you'll need to manually whitelist the printer's address; otherwise, connecting will be impossible, even with the correct password.
For initial setup, you may need a USB Type AB (printer) cable. Although HP 135w Although marketed as a wireless solution, the WiFi configuration is often "tethered" via a temporary wired connection. Find a high-quality cable no longer than 1.5 meters to avoid interference when transmitting setup data.
Reset network settings to factory defaults
If the printer was previously used on a different network or setup was unsuccessful, you should clear the current profile. This will eliminate configuration file conflicts. In the control panel HP Laser 135w Find the wireless button (antenna icon).
Press and hold this button along with the Cancel button (the cross) for 5 seconds. The power and wireless indicators should light up simultaneously. This indicates that network card rebooted and ready to receive new parameters.
After performing the button combination, the WiFi indicator should start blinking blue. This means the device is waiting for a connection and is broadcasting a signal for detection by external utilities. If there is no blinking, repeat the procedure, ensuring you hold the buttons long enough.
Using HP Smart for silent installation
The most effective configuration method is to use the official application. HP SmartIt's available for Windows, macOS, Android, and iOS. The app will automatically find the device on the local network or offer to connect it via Bluetooth to transfer the WiFi password.
Launch the app and click "Add Printer." If the device isn't found automatically, select "Printer not listed" and follow the wizard's instructions. You'll need to select your network from the list and enter the password.
- 📱 Download the HP Smart app from the official store (Microsoft Store or App Store).
- 🔌 Turn on Bluetooth on your smartphone or PC to make searching easier.
- 🔑 Prepare your WiFi network password in advance, as the system will ask for it during the process.
- 📶 Make sure your mobile device and printer are in the same room for a stable signal during setup.
During installation, the program may ask you to create an HP account. This is necessary to activate remote printing and toner level monitoring. Some advanced features are available without registration. multifunctional device may not be available.
Setup via USB cable (WPS method)
If the automatic search doesn't yield results, use the temporary cable connection method. This is the most reliable option for complex network environments. Connect HP 135w to your computer via USB and run the driver installer from the official website.
In the installation menu, select "Wireless" as the connection type. When prompted, select "Switch from USB to wireless connection." At this point, the utility will copy the network settings from the operating system to the printer's memory.
☑️ USB Connection Checklist
After the data transfer, the program will prompt you to disconnect the cable. The printer should save its settings and switch to network mode. The indicator on the panel should turn blue, indicating a successful connection to the router.
Wi-Fi Direct connection
Function Wi-Fi Direct Allows you to print directly from your mobile device without using a router. This is ideal for situations when you urgently need to print a document from your phone, but your primary Wi-Fi connection is unavailable or overloaded.
To activate, press the wireless button on the printer's panel. A name like HP-Print-xx-Laser 135wThe default password is usually located on a sticker on the back of the device or printed on the information page.
| Parameter | Default value | Where to change |
|---|---|---|
| Network name (SSID) | HP-Print-xx-Laser 135w | Web Interface (EWS) |
| Password | 12345678 (example) | On the information page |
| Security mode | WPA2 | WiFi Direct settings |
| Max devices | 5 connections | Doesn't change |
It is worth remembering that when active Wi-Fi Direct Data transfer speeds may be lower than through the main router, especially when printing large graphic files. In this mode, the printer may also be unavailable to other users on the local network.
Installing drivers and diagnostics in Windows
After successfully connecting to the network, you need to make sure the operating system sees the device. In Windows 10 and 11, go to "Settings" → "Devices" → "Printers & Scanners." Click "Add a printer or scanner."
If the system found HP Laser 135w If your printer is on the network, but the driver isn't installed automatically, download the full software package from the manufacturer's website. During installation, select the "Use the printer over the network" option.
⚠️ Note: Operating system interfaces and driver versions are subject to update. If the menu paths described differ, use the Windows settings search or refer to the help system for your OS version.
To check the status, open Control Panel → Devices and Printers. Right-click the printer icon and select Printer Properties. On the General tab, click Test Print. A successful page print confirms that data transfer protocol works correctly.
What should I do if my computer can't see my printer on the network?
Make sure the PC and printer are on the same subnet (the first three digits of the IP address must match). Check if your antivirus or firewall is blocking the printing ports (usually 9100). Try temporarily disabling the firewall for diagnostics.
Common problems and their solutions
One common issue is a printer's IP address changing after a router reboot. To avoid connection loss, it's recommended to assign a static IP address to the printer's MAC address in the router settings. This will ensure a consistent path for computers on the network.
If printing is slow or interrupted, check the signal strength. Laser printers are sensitive to electromagnetic interference. Do not place HP 135w near microwave ovens or powerful radiation sources.
If errors persist, try updating your device's firmware via the service menu on the HP website. New software versions often contain fixes for compatibility with modern WiFi encryption standards.
Why won't my HP 135w printer connect to 5GHz WiFi?
Wireless communication module in HP Laser 135w Only supports the 802.11 b/g/n standard, which operates exclusively in the 2.4 GHz band. Routers that only broadcast 5 GHz will not be visible to the device. You must enable 2.4 GHz network broadcasting in the router settings.
How to find out the IP address of a printer?
To obtain a network address, press and hold the wireless button on the device's panel for 5 seconds. The printer will print a network configuration report, with the current IP address listed in the IPv4 section.
Is it possible to connect a printer without a computer?
Yes, using the mobile app HP Smart on your smartphone or tablet. The app allows you to perform initial WiFi setup and transfer the password directly to your device via Bluetooth or a temporary hotspot.
What does a blinking blue WiFi light mean?
A flashing blue light indicates the wireless module is active, but a connection to the router has not been established. The device is searching for a network or waiting to connect. A solid blue light indicates a successful connection.