MFP Epson L805 deservedly considered one of the most popular photo printers in the SOHO segment due to the use of ink continuous feed systems (CISS) and high print quality. However, to unlock the full potential of this device, it's necessary to get rid of unnecessary cables and set up wireless printing. This will allow you to print documents and photos directly from your laptop, smartphone, or tablet without having to search for a cable each time.
Setup process wireless connection This may seem complicated at first glance, especially if the user is new to it. Modern operating systems and Epson software greatly simplify the process by automating the search for devices on the network. The key is to strictly follow the steps and closely monitor the indicators on the control panel.
In this article, we'll cover every step of the connection process, from checking your router's compatibility to installing drivers on your computer. You'll learn how to avoid common mistakes and what to do if your printer isn't visible on the network. The key is to activate the Wi-Fi Direct function and set up a static IP address in the correct sequence for stable operation.
Equipment preparation and compatibility testing
Before you begin setting up, make sure that your wireless router The printer is working properly and is distributing internet. Epson L805 Supports IEEE 802.11 b/g/n standards, meaning it's compatible with most modern routers. However, if you're using a 5 GHz network, the device may not detect it, as it only operates in the 2.4 GHz band.
You also need to prepare the printer itself: fill it with ink and insert paper into the tray. The device must be turned on and in standby mode. If the lights are flashing red or are constantly on, it may need to be reset errors or maintenance of the pump system.
⚠️ Caution: Make sure that MAC address filtering is not enabled on your router, otherwise the printer will not be able to access the network even if the password is entered correctly.
To successfully configure your router, you'll need the following information: your wireless network name (SSID) and its password. If you don't know the password, you can find it on the sticker on the bottom of your router or in your provider's account.
- 📶 Check your router's operation and the presence of a 2.4 GHz network.
- 🖨️ Make sure your Epson L805 printer is filled with ink and ready to use.
- 🔑 Write down or remember the password for your WiFi network.
- 💻 Prepare the computer or smartphone through which you will perform the setup.
Activating Wi-Fi mode on an Epson printer
The first step is to set the printer's network module to active network search mode. On the front panel Epson L805 There's a button with a picture of a smartphone and a wave. Pressing it launches the mode. Wi-Fi Direct or search for infrastructure.
After pressing the button, the network indicator should start blinking green. If only the power indicator is lit, the wireless module is turned off. In some cases, you may need to hold the button for a few seconds until the indicator lights up.
What to do if the indicator does not light up?
If the network indicator isn't responding, try restarting the printer by unplugging it for 10-15 seconds. Also, check if the "Quiet Mode" or Power Saver feature is enabled, which could be blocking network activity.
It is important to understand the difference between operating modes. Mode Infrastructure connects the printer to the router, allowing all devices on the network to print. Mode Wi-Fi Direct Creates a direct connection between your device and printer, bypassing the router, making it convenient for quick printing from your phone.
If you plan to use the printer in an office with a secure corporate network, it's best to consult with your system administrator immediately. Additional security settings may need to be configured or static IP.
WPS method: quick connection without entering a password
The easiest way to set up Epson L805 — Use WPS (Wi-Fi Protected Setup). This method allows you to connect devices with a simple press of a button, eliminating the risk of entering a complex password incorrectly. Your router must support this feature.
Find the WPS button on your router. It may be physical or virtual in the admin interface. Press it and, within two minutes, press the WiFi button on the printer. Hold it for about three seconds until the lights start flashing alternately.
☑️ WPS Connection Checklist
The connection process will take up to 2 minutes. If successful, the wireless network indicator on the printer will turn green and remain on steadily. This means IP address received and connection established.
It's worth noting that the WPS method doesn't always work reliably with older router models or if the signal is too weak. In such cases, it's better to use manual configuration via software.
Setup via EpsonNet Setup software
If automatic connection does not work, use the utility EpsonNet SetupIt's included in the full driver package, which can be downloaded from the manufacturer's official website. Run the installer and select "Configure a wireless connection."
The program will prompt you to select a connection method. Select "Wireless Network" and follow the on-screen instructions. The utility will automatically search for available networks and prompt you to enter a password. This is the most secure method for operating systems. Windows And macOS.
During the installation process, you may need to temporarily connect the printer to your computer via a USB cable. This is necessary for the initial transfer of network settings. After successful setup, you can disconnect the cable.
⚠️ Note: When installing drivers, your antivirus or firewall may block the connection. We recommend temporarily disabling your antivirus or adding an exception for Epson during setup.
After completing the setup wizard, the program will prompt you to print a test page. This will help ensure that data is being transferred correctly over the network. If the print is successful, the device is ready for use.
Solution: Printer not found on the network
Users often encounter a situation where the computer "doesn't see" the printer, even though both devices are connected to the same network. The first reason is different subnets. Make sure your PC and Epson L805 are located in the same network segment, for example, not separated by the router's guest mode.
The second common problem is incorrectly set date and time on the router or computer, which can conflict with security certificates. Also, check if your antivirus software is blocking the network printer. unknown device.
You can try assigning a static IP address to the printer using the utility. EpsonNet ConfigThis will prevent the router from changing the device's address after a reboot, causing the computer to lose connection.
If all else fails, reset the printer's network settings. To do this, turn off the device, hold down the network button, and turn on the printer while holding the button. This will reset the network settings to factory defaults.
Printing from smartphones and tablets**
For printing from Android and iOS mobile devices, it is best to use the app Epson iPrintIt's available in official app stores and allows you to not only print photos but also scan documents if a scanner is connected.
The app automatically finds printers on the same WiFi network. If the printer isn't found, select "Select Printer" and enter the IP address manually. You can find the address by printing a network status report from the printer's control panel.
The technology is also available for iOS users. AirPrint, which doesn't require installing any additional apps. Simply open a photo or document, tap "Share," and select a printer from the list.
| Parameter | Epson iPrint | AirPrint (iOS) | Google Cloud Print |
|---|---|---|---|
| Platform | Android / iOS | iOS / macOS | Android / Chrome |
| Setting up | An app is required | Automatically | Via a Google account |
| Functions | Print, scan, photo | Print only | Remote printing |
| Stability | High | Very high | Depends on the server |
Frequently Asked Questions (FAQ)
Can the Epson L805 be connected to a hidden WiFi network?
Yes, it is possible, but only through manual configuration in the utility. EpsonNet SetupWhen manually selecting a network, enter the exact name (SSID), case-sensitive, and encryption type. The automatic search does not detect hidden networks.
What is the maximum WiFi range of this printer?
The range depends on the power of your router and obstacles in the room. In open areas Epson L805 It maintains a reliable connection at a distance of up to 30-40 meters. In an apartment with concrete walls, the range may drop to 10-15 meters.
The printer prints very slowly over WiFi, what is the reason?
Network printing speed depends on signal quality and channel congestion. If the signal is weak, data will be transmitted with errors and will need to be retransmitted. Try moving the router closer or switching to a less congested WiFi channel.
Do I need to reconfigure my network after replacing my router?
Yes, if the new router has a different network name (SSID) or password, the printer settings will be invalid. You'll need to reconnect using the new WiFi password.
Does L805 support driverless printing?
For basic document printing, the driver may be installed automatically on some operating systems. However, for full functionality, color customization, and photo printing, the full package is required. Epson drivers is mandatory.