Disabling Wi-Fi on an Epson L805 Printer: 5 Proven Methods

Wireless printer connection Epson L805 convenient for printing from multiple devices, but sometimes you need to disable it completely Wi-Fi moduleThe reasons can vary, from the need to switch to a wired connection to resolving network conflicts or saving energy. Unlike most office MFPs, this model doesn't have a physical button to deactivate the wireless network—all settings are hidden in the menu or software.

In this article, we will look at all possible ways to disable Wi-Fi, including working with printer control panels, proprietary software Epson Software Updater, and even a hard reset to factory settings. We'll pay special attention to common errors (for example, when the printer freezes when changing settings) and alternative solutions for cases where standard methods fail. If you're new to configuring network settings EpsonWe recommend reading the entire article—some details depend on the device's firmware version.

1. Disabling Wi-Fi via the printer control panel

The most direct way is to use the built-in menu Epson L805However, the printer's interface is not as intuitive as that of modern models, so you need to proceed with caution.

First, make sure the printer is turned on and in standby mode (the power light is green and not blinking). Then:

1. Click the button Settings (gear icon) on the control panel.
2. Go to the section Net → Wi-Fi settings.
3. Select an option Disable wireless network (or Wi-Fi: Off depending on the firmware version).
4. Confirm the action with the button OK.

If the item Disable wireless network is missing, then your firmware version only supports network hiding (The printer won't broadcast its access point, but the module will remain active.) In this case, proceed to the next method.

Print your current network settings (in case you need to restore them later)

Make sure the printer is not in the process of printing.

Connect the printer to a power source (do not use the USB cable for power)

Check if the Wi-Fi indicator is on (if it is blinking, wait until the network activity is complete) -->

⚠️ Attention: On some firmware versions Epson L805 After disabling Wi-Fi through the menu, the printer may automatically enable the module the next time it's started. This is due to the function Fast connection, which must be disabled separately in the section Additional network settings.

2. Using the Epson Software Updater

Proprietary software from Epson Allows you to manage printer settings from your computer, including network parameters. This method is convenient if the printer's control panel is inaccessible or unresponsive.

Download and install Epson Software Updater With official website (select the version for your operating system). After installation:

1. Connect the printer to the computer via USB cable (definitely original!).
2. Run the program and wait until it detects the model. L805.
3. Go to the section Network settings → Wireless communication.
4. Uncheck the box Turn on Wi-Fi and save the changes.

If the program does not see the printer, try:

• 🔌 Reconnect the USB cable to another port.
• 🖥️ Restart your computer and printer.
• 🔄 Update software via Checking for updates in the program menu.

3. Reset the printer to factory settings

If the previous methods did not work, you can do full resetThis is a drastic method that will delete all user settings, including network settings. Use it only as a last resort!

Instructions for Epson L805:

1. Turn off the printer and disconnect all cables (USB, Ethernet, power).
2. Press and hold the button Stop/Reset (red triangle) and, while holding it, turn on the printer.
3. Keep the button pressed 10-15 seconds, until all indicators flash.
4. Release the button and the printer will reset and reboot.

After the reset, Wi-Fi will be disabled, but you'll need to reconfigure the language, date, and other basic settings. If the printer still won't turn on or displays error messages, contact a service center.

What should I do if the printer does not print after resetting?

After a complete reset Epson L805 You may need to reinstall the drivers on your computer. Also check:

1. Ink level (perhaps the reset reset the counters).

2. Default print settings (the driver may have an incorrect paper size).

3. Connect to the network (if using Ethernet or USB).

⚠️ Attention: On some firmware versions Epson L805 A factory reset doesn't physically disable the Wi-Fi module; it only clears saved networks. In this case, the module will remain active but won't connect automatically. To completely disable it, use a combination of methods 1 and 3.

4. Disabling via the printer's web interface

Many people don't know that Epson L805 has a built-in web interface to manage settings. To use it, the printer must be connected to your network (even if you plan to disconnect it).

Find first IP address printer:

1. Click the button Settings → Net → View network settings.
2. Write down the address from the line IPv4 (For example, 192.168.1.100).

Next:

1. Open a browser on your computer or smartphone.
2. Enter in the address bar http://[printer IP address] (For example, http://192.168.1.100).
3. Log in (the default login and password are usually admin/admin or an empty field).
4. Go to the section Wireless or Wi-Fi Settings and turn off the module.

If the web interface is unavailable, please check:

• 🌐 The entered IP address is correct (without https://!).
• 🔒 Firewall or antivirus settings (they may block access).
• 📡 Connect the printer to the network (the Wi-Fi indicator should be green).

5. Alternative methods: physical blocking of the signal

If software methods don't help, or the printer's Wi-Fi module is faulty (for example, it constantly turns on by itself), you can resort to "mechanical" solutions.

Method 1: Shielding the module

Wi-Fi module in Epson L805 located near the rear cover of the printer. You can temporarily block the signal by wrapping this area aluminum foil or a special screen. This won't damage the device, but it may impair cooling—use this method only briefly.

Method 2: Disabling via the router

If the printer is connected to your Wi-Fi network, you can block it. MAC address in the router settings:

1. Find MAC address printer in the network settings (Settings → Net → MAC address).
2. Go to the router's web interface (usually 192.168.1.1).
3. In the section MAC filtering or Blacklist Add the printer address.

This will not physically disable the Wi-Fi module, but the printer will not be able to connect to your network.

6. Troubleshooting Wi-Fi Disconnection Errors

When working with settings Epson L805 Users often encounter typical problems. Here are the most common ones and how to solve them:

If none of the methods worked, the problem might be hardware failure Wi-Fi module. In this case:

• 🔧 Contact the service center Epson (warranty repair covers module defects).
• 📡 Use the printer via USB or Ethernet (if the port is available in your modification).
• 🔄 Try updating your printer's firmware (instructions on the official website).

FAQ: Frequently asked questions about disabling Wi-Fi on the Epson L805

Is it possible to permanently disable Wi-Fi on an Epson L805 so that it doesn't turn on even after a reboot?

Yes, but to do this, you need to combine a factory reset (method 3) with disabling it through the control panel (method 1). After the reset, immediately go to the menu and disable Wi-Fi until you connect to a network for the first time. Also, check for firmware updates—new versions sometimes add an option to completely disable the module.

My printer won't print via USB after disconnecting Wi-Fi. What should I do?

This is because the computer's driver may have "forgotten" the printer after changing network settings. Reinstall the driver from the official website. Epson, selecting the connection mode Local printer (not a network one!) Also, check if the printer settings are ticked. Network printing only.

How to check if Wi-Fi is really disabled?

There are three ways:

1. Look at the Wi-Fi indicator on the printer panel - it should go out.
2. Try to find the printer in the list of devices on your router.
3. Run the command on your computer arp -a in the terminal (Cmd) and check if the printer IP is displayed.

Is it possible to disable Wi-Fi without resetting other printer settings?

Yes, use it. Epson Software Updater (method 2) or web interface (Method 4). These methods only allow you to change network settings, without affecting ink counters, print settings, or other user data. Only use a factory reset (Method 3) if other options fail.

Will the printer consume less power after turning off Wi-Fi?

Yes, but the savings will be minimal - about 1-2 W in standby modeBasic energy consumption Epson L805 is related to the continuous ink supply system (CISS) and print heads. For real savings, it's better to set the printer to automatically turn off after a certain period of inactivity (optional) Energy saving in the menu).