Modern office tasks require mobility, and being tied to wires becomes a serious productivity limitation. Wireless printer allows you to print documents and photos from any device within the network range, be it a laptop, smartphone or tablet. Model Epson L355 has proven itself as a reliable solution for homes and small businesses, but initial Wi-Fi setup can be challenging for inexperienced users.
The process of integrating a device into a local network depends on several factors, including the operating system version and router type. There are various synchronization methods, from using a USB cable for initial settings transfer to manually entering parameters through the control panel. Understanding these nuances will help you avoid common mistakes and quickly establish stable printing without a physical connection to a computer.
In this guide, we'll walk you through every connection step, focusing on drivers and software. You'll learn how to properly prepare MFP Getting started, what utilities need to be downloaded, and how to handle IP address conflicts. Being prepared for the process and having up-to-date information from your provider will significantly speed up the process.
Preparing to set up a wireless network
Before starting any manipulations with the software, you must ensure that the equipment is physically ready for operation. Printer must be unpacked, ink cartridges installed, and the system must be initially bled if the device is new. For the model L355 It is critical that there is paper in the tray, as many test procedures require a printed report.
⚠️ Note: Make sure your router has a 2.4 GHz signal, as many older printer models do not support the 5 GHz standard.
You will also need a computer or laptop with internet access to download the necessary files. If you plan to set up printing from a smartphone, make sure the mobile device is connected to the same Wi-Fi network you plan to connect to. MFPFind out the password for your wireless network in advance, as you will need it during the configuration process.
Check the indicator lights on the front of the device. The horizontal indicator bar should indicate the ink level, and the Wi-Fi button should either blink or remain solid, depending on the current status. If the connection light is not active, you may need to reset the network settings to factory defaults before attempting to connect again.
☑️ Equipment readiness
Installing drivers and the Epson Net Setup utility
The operating system may not always automatically detect a network printer without first installing specialized software. For the model Epson L355 The most effective way is to use the full driver package from the manufacturer's website. This package includes a utility Epson Net Setup, which automates the process of searching for a device on the network.
After downloading the installation file, run it and follow the on-screen instructions. When prompted for a connection type, select "Wireless" or "Wi-Fi." At this point, the system will ask you to connect the device to the computer via a USB cable. This is a temporary measure to transfer the router settings directly to memory. printer.
During installation, the utility scans available networks and prompts you to select yours from a list. After selecting the SSID (network name), you'll be prompted to enter a password. The utility will automatically transfer this data via the USB port, after which the Wi-Fi indicator on the device's panel will begin flashing, indicating a connection attempt. Once the connection is established, the cable can be disconnected.
WPS method: quick connection without password
If your router supports the technology WPS (Wi-Fi Protected Setup) significantly simplifies the connection process. This method allows for automatic transfer of encryption keys, eliminating the need to manually enter a complex password on a computer keyboard. To implement this method, the router must have a physical WPS button or a corresponding function in the web interface.
Press and hold the Wi-Fi button on the control panel Epson L355 Wait for a few seconds until the Wi-Fi and network lights begin flashing alternately. This puts the printer in connection standby mode. Then, within two minutes, press the WPS button on your router. The devices will find each other and exchange authentication data.
A successful connection is confirmed by the Wi-Fi indicator on the printer glowing steadily. If the blinking stops and only the error indicator remains lit, the connection was unsuccessful. In this case, check to see if the timeout has expired (usually 2 minutes) and repeat the process, moving closer to the router to improve the signal strength.
| Indicator | State | Meaning |
|---|---|---|
| Wi-Fi | Flashing | Searching for a network or transferring data |
| Wi-Fi | It's on constantly | Successful connection to the network |
| Network (papers) | Flashing | Receiving or printing data |
| Error | It's on fire | Connection failure or hardware error |
Setup via the Epson iPrint mobile app
For smartphone and tablet users, Epson has developed an application Epson iPrint, which allows you to not only print but also perform initial device setup. This is useful if you don't have a computer with a USB port nearby. Download the app from the App Store or Google Play and launch it.
In the app interface, select "Set up a new product" or "Change Wi-Fi settings." The app will prompt you to select your printer from a list of available devices. Next, you'll need to select your home Wi-Fi network and enter the password. Your smartphone will transfer these settings to the printer via a temporary direct connection.
After successful synchronization, you can instantly print photos and documents directly from your phone's screen. The app also allows you to scan documents, saving them directly to your mobile device's gallery or sending them to cloud storage. This makes MFP a full-fledged digital document management center in the home.
⚠️ Important: When setting up via the mobile app, make sure that Bluetooth and geolocation are enabled on your phone, as modern versions of Android and iOS require these permissions to find devices.
Connection problems and their solutions
Despite the simplicity of the procedure, users may encounter various technical difficulties. Often, the problem stems from incompatible security standards. If the router uses mixed mode or an outdated encryption protocol, Epson L355 may refuse to connect. In such cases, it is recommended to temporarily change the router settings to WPA2-PSK (AES).
Another common cause of problems is the MAC address filter on the router. If this feature is enabled, devices with unknown addresses will be blocked from accessing the network. You need to find the printer's MAC address (printed on the network status report or on a sticker on the printer) and add it to the whitelist of allowed devices in the router settings.
It's also worth paying attention to the frequency range. If your router broadcasts two networks with the same name (2.4 GHz and 5 GHz), the printer may be trying to connect to a band it can't access. Separate the networks by giving them different names (for example, HomeWiFi and HomeWiFi_5G), and connect the printer only to the 2.4 GHz network.
Reset network settings
If all else fails, perform a hard reset. Press and hold the Wi-Fi button and the Cancel button (the triangle in a circle) simultaneously for 5-7 seconds. The lights will flash, and the network settings will be reset to factory defaults.
Printing a network status report
For a more thorough diagnosis, it's helpful to print a network status report. This document contains all the technical information about your current connection, including the IP address, subnet mask, MAC address, and signal strength. To obtain the report, press and hold the Wi-Fi button on the printer panel for 7 seconds until the print light starts blinking.
By reviewing the report, you can determine whether your printer is visible to your router and whether it is receiving the correct IP address. If the IP address field contains all zeros (0.0.0.0), it means the device has not received an address from the router's DHCP server. In this case, you may need to manually configure the IP address or reboot the router.
Please note the meaning Signal Strength (Signal level). If it's low, the printer may be too far from the router or obstacles (walls, appliances) may be blocking the signal. In this case, you should move the device or install a repeater to boost the signal in the printing area.
Why doesn't the printer see the Wi-Fi network?
The most common issue is the frequency range. The Epson L355 only operates in the 2.4 GHz band. If the router hides the SSID or only uses the 5 GHz band, the device won't detect the network. Also, check if a MAC address filter is enabled.
Is it possible to connect a printer without a USB cable?
Yes, this is possible via the WPS menu on the router and printer, or via a direct Wi-Fi Direct connection if supported by the firmware. However, initial setup via a USB cable using the Epson Net Setup utility is the most stable method.
How to change the IP address of a printer?
The IP address can be changed through the web interface (EpsonNet Config) by entering the device's current IP address in the browser. In the TCP/IP section of the network settings, you can set a static address so that it remains unchanged after a router reboot.
What to do if the orange error indicator is on?
The orange light can indicate a variety of issues, including out of paper, a paper jam, low ink, or a connection error. Press the droplet button or check the status report to find the error code.