Where to find the Wi-Fi password on the HP Smart Tank 513 printer: full instructions

Printer HP Smart Tank 513 The HP 1000 is a popular model with wireless printing support, but many users face a problem: where to find the Wi-Fi password to connect the device to the network? Unlike traditional routers, there's no sticker with factory data, and the control interface can be confusing. In this article, we'll cover all the ways to access the printer's network settings, including finding the current password, resetting it to factory settings, and manually configuring the connection.

Peculiarity Smart Tank 513 The key is that it can operate either in Wi-Fi Direct mode or through your home router. The method for obtaining the password varies depending on the mode selected. We'll cover both options and explain why the printer might "forget" its network settings after updates or power outages. If you've just unpacked the device or are experiencing a connection error, you'll find the solution here.

Wi-Fi Factory Defaults: Where to Find the Default Password

When first turned on HP Smart Tank 513 Creates its own Wi-Fi Direct network with a unique name (SSID) and password. This information is usually specified:

  • 📄 On sticker on the back of the printer (next to the serial number). Look for the line Wi-Fi Direct Password or Wireless Password.
  • 📱 In HP Smart mobile app (section "Printer settings" → "Network").
  • 🖨️ On self-diagnostic test page, which can be printed through the printer menu: Settings → Reports → Network Configuration Page.

If the sticker is worn off or missing and the printer is not yet connected to your network, use universal default password for Wi-Fi Direct: 12345678 or 00000000These combinations work for most models. HP Smart Tank upon first startup. However, after initial setup, the printer generates a new unique password, which will no longer match the factory default.

It is important to understand that Wi-Fi Direct password And your home network password These are different things. The first is needed for a direct connection to the printer (for example, printing from a phone without a router), and the second is for integrating the printer into your local network. If you're looking for the password for connecting the printer to the internet, you should get it from the router's sticker or in the router's settings.

How to find out the current printer Wi-Fi password through the menu

If your printer is already connected to the network but you've forgotten the password, you can find it in the device settings. To do this:

  1. On the printer control panel, press the button Settings (gear).
  2. Go to the section Net or Wireless (depending on the firmware version).
  3. Select Network Configuration Report or Wi-Fi Direct.
  4. Click Print report — the printer will issue a sheet with the current network parameters, including SSID And password.

Please note the following fields in the report:

Parameter Description
Wireless Network Name (SSID) The name of your Wi-Fi network to which the printer is connected
Security Type Type of protection (usually WPA2-PSK or WPA3)
Wi-Fi Direct Password Password for direct connection to the printer
IP Address The local IP of the printer on your network (needed for manual configuration)

If there is no line with the home network password in the report, this means that the printer is connected via WPS (button on the router) or the password is stored in encrypted form. In this case, you will need to reset the network settings or use alternative methods.

📊 How do you usually connect your printer to Wi-Fi?
Via network password
Using the WPS button on the router
Direct connection (Wi-Fi Direct)
I don't know how to do this

Resetting the printer's network settings to factory defaults

If you can't find the password or your printer refuses to connect to the network, this will help. complete reset of network settingsThis procedure will reset the Wi-Fi settings to factory defaults, but will not affect other device features (such as ink meters or custom print profiles).

To reset:

  1. Make sure the printer is turned on and in standby mode.
  2. Press and hold the button Wi-Fi (antenna icon) and a button Information (exclamation mark) simultaneously during 10-15 seconds.
  3. Release the buttons when the Wi-Fi indicator starts flashing. orange (this is a reset signal).
  4. Wait for the printer to restart (may take up to 2 minutes).

After reset:

  • 🔄 The printer will create a new Wi-Fi Direct network with factory password (see section above).
  • 📶 You will need to reconnect it to your router through the settings menu or app HP Smart.
  • ⚠️ All saved print jobs and network settings will be deleted.
What to do if the reset didn't work?

If the indicator does not flash orange after holding the buttons, try:

1. Disconnect the printer from the network for 30 seconds, then repeat the procedure.

2. Use a combination of keys Wi-Fi + Cancel (cross) instead Information.

3. Update the printer firmware via USB (instructions in the next section).

Attention: on some firmware HP Smart Tank 513 Resetting your network settings will block Wi-Fi Direct until you manually reconnect to the router. If the direct network doesn't appear after resetting, first connect the printer to your home network.

Setting up Wi-Fi using the HP Smart app

The most convenient way to manage your printer's network settings is through the official app. HP Smart (available for Android, iOS And Windows). It automatically finds the printer on the local network and allows you to change connection parameters without manually entering passwords.

Step-by-step instructions:

  1. Download and install HP Smart from App Store, Google Play or Microsoft Store.
  2. Turn on Bluetooth on your phone/tablet and launch the app.
  3. Click Add a printer and select HP Smart Tank 513 from the list of found devices.
  4. Follow the setup wizard:
    • If the printer is new, select Setting up a new printer.
    • If the printer has already been used, select Add an existing printer.
  • When connecting to Wi-Fi, the application will offer:
    • 🔗 Connect to the printer's network (Wi-Fi Direct) for setup.
    • 📶 Enter your router password.
    • 🔄 Use WPS (button on the router).

    If the application does not find the printer:

    • 🔌 Make sure the printer is turned on and within Wi-Fi/Bluetooth range.
    • 📱 Restart your phone and printer.
    • 🔄 Temporarily disable mobile internet in your phone settings (to avoid conflicts with Wi-Fi).

    ☑️ Preparing for setup via HP Smart

    Completed: 0 / 4

    Once successfully connected, the app will save your network password to the printer. To print in the future, simply select the printer from the list of devices—you won't need to re-enter the password.

    Manual Wi-Fi setup via the control panel

    If you don't have access to a smartphone or app HP Smart If it doesn't work, you can connect the printer to the network manually through its menu. This method requires knowing the exact name of your Wi-Fi network (SSID) and password.

    Instructions:

    1. On the printer control panel, press Settings (gear).
    2. Select Net → Setting up a wireless network.
    3. Click Wi-Fi Setup Wizard (Wireless Setup Wizard).
    4. The printer will begin searching for available networks. Select your network name (SSID) from the list.
    5. Enter your password using the on-screen keyboard. Use the button to switch between upper and lower case letters. Change of register (up arrow).
    6. Confirm your input and wait for the connection to complete (the Wi-Fi indicator should be on). blue).

    If your network does not appear in the list:

    • 📡 Make sure the router is turned on and distributing Wi-Fi (check the indicators on the case).
    • 🔍 Try entering the network name (SSID) manually by selecting Entering a network name.
    • 🔄 Restart your router and printer.

    For networks with hidden SSID:

    1. In the settings menu, select Other networks or Manual input.
    2. Enter the network name exactly (case sensitive!).
    3. Select the security type (WPA2-PSK or WPA3).
    4. Enter your password and save your settings.

    Updating firmware to resolve Wi-Fi issues

    If the printer does not maintain a connection, constantly asks for a password or does not see the network, the reason may be in outdated firmwareThe manufacturer regularly releases updates that fix connection errors and add support for new security standards (for example, WPA3).

    There are two ways to update the firmware:

    • 📱 Via the HP Smart app:
      1. Connect the printer to the network (even if the connection is unstable).
      2. Open the application, select your printer.
      3. Go to Printer settings → Updates.
      4. If an update is available, click Install.
  • 💻 Via USB from a computer:
    1. Download the latest firmware from official HP website (Support section → enter your printer model).
    2. Unzip the archive and copy the firmware file (usually with the extension .rfu) to the flash drive.
    3. Insert the flash drive into the printer's USB port.
    4. On the printer control panel, select Settings → Service → Firmware update.

      5. After update:

      • ✅ The printer's network settings will be reset to factory defaults (you will need to reconnect to Wi-Fi).
      • ✅ Support for new security types may appear (for example, WPA3).
      • ⚠️ Do not turn off the printer during the update - this may cause the system to crash.

      List of latest firmware versions for HP Smart Tank 513:

      Firmware version Release date Main changes
      2305A May 2023 WPA3 support, fixes for 5GHz Wi-Fi
      2211B November 2022 Improved stability of connections to hidden networks
      2108A August 2021 Fixed Wi-Fi Direct issues on Android 11+

      Common mistakes and their solutions

      Even after proper setup, the printer may still display connection errors. Let's look at common issues and how to resolve them:

      • 🚫 "Incorrect password" error:

        The printer won't accept the password, even though you're sure it's correct. Solution:

        • Check the case of your characters (passwords are case sensitive!).
        • Reconnect the printer via HP Smart — the application can automatically correct input errors.
        • Reset network settings on your printer and router.
      • 🔌 The printer does not see the 5 GHz network.:

        Some firmware versions Smart Tank 513 have problems with 5 GHz networks. Solution:

        • Temporarily disable 5 GHz in your router settings and use only 2.4 GHz.
        • Update your printer firmware (see previous section).
        • Set your router to mixed mode 2.4 + 5 GHz with the same SSID.
      • 📵 The printer is connected but does not print via Wi-Fi.:

        There is a network connection, but printing tasks are not performed. Solution:

        • Make sure the printer is installed as default printer in your PC/phone settings.
        • Restart your router and printer.
        • Remove the printer from the device list and add it again through HP Smart.

    If none of the methods helped, try alternative connection:

    • 🔌 Connect the printer to your computer via USB and set up sharing it over the network.
    • 📶 Use Wi-Fi Direct for printing directly from mobile devices.
    • 🖧 Connect the printer to the router via Ethernet (if the model supports wired connection).

      • FAQ: Answers to Frequently Asked Questions

      Is it possible to connect the HP Smart Tank 513 to Wi-Fi without a password?

      Yes, if your router supports it. WPS (quick connection button). To do this:

      1. Click the button WPS on the router (usually it is signed or marked with the 🔄 icon).
      2. On the printer, go to Settings → Network → WPS Setup.
      3. Select Press the button on the router and confirm.
      4. The printer will connect to the network without entering a password (within 2 minutes after pressing WPS).

      If WPS is disabled in the router settings, enable it through the web interface (usually at 192.168.0.1 or 192.168.1.1).

      How do I change the Wi-Fi Direct password on my printer?

      The Wi-Fi Direct password changes automatically every time you reset your settings. To set your own password:

      1. Connect to the printer via HP Smart.
      2. Go to Printer Settings → Network → Wi-Fi Direct.
      3. Select Change password and enter a new combination (minimum 8 characters).
      4. Save the settings and the printer will reboot.

    Please note: this password only works for direct connections. Your router's password is used to connect to your home network.

    The printer is connected to Wi-Fi, but it's not visible on the network. What should I do?

    If your printer does not appear in the list of available devices, check:

    • 🔌 Printer IP address: Print a network configuration report and make sure it is on the same subnet as your computer (eg. 192.168.1.x).
    • 🔥 Firewall/antivirus: Temporarily disable them on your PC - they may block device detection.
    • 📡 Network mode: in the router settings, make sure that the mode is enabled b/g/n for 2.4 GHz (not only n).
    • 🔄 Protocol: the printer must use DHCP to obtain an IP automatically. If the report shows a static IP, reset the network settings.

      • If the problem persists, assign a static IP to the printer in the router settings (binding it by MAC address).

    How do I find the printer's MAC address to configure my router?

    A MAC address is needed to bind a printer to a static IP address or to filter devices on the network. There are three ways to obtain it:

    1. Via the configuration report: print it out (see section above) and find the line MAC Address or Ethernet address.
    2. Via the HP Smart app: Open the printer information - the MAC address is listed in the Network section.
    3. On the sticker: On some models, the MAC address is located on the back panel next to the serial number.

    MAC address HP Smart Tank 513 usually has the format XX:XX:XX:XX:XX:XX, where the first 6 characters are 3C:6A:A7 (manufacturer HP).

    Can I use the printer without Wi-Fi?

    Yes, HP Smart Tank 513 supports several alternative connection methods:

    • 🔌 USB: connect the printer to the computer with a cable (not included, you need one) USB Type-B). The drivers will be installed automatically after HP Smart.
    • 📱 Wi-Fi Direct: Direct printing from mobile devices without a router (see the password at the beginning of the article).
    • 📶 Ethernet: If your model is equipped with a port RJ-45, connect the printer to the router with a cable.
    • 🖥️ Cloud printing: through services HP ePrint or Google Cloud Print (requires internet connection at least during setup).

    For printing from a phone without Wi-Fi, it is most convenient to use Wi-Fi Direct or USB OTG adapter (for Android).

    • 📖 Read also

    Connecting the Canon G3411 MFP via Wi-Fi: A Complete Guide A detailed guide to setting up a wireless connection for the Canon Pixma G3411. Troubleshoot driver issues. How to Connect a Canon Pixma G3411 to Wi-Fi: A Complete Guide Detailed setup of the Canon G3411 printer via Wi-Fi. Wireless network setup via WPS and manual mode. How to Change the Wi-Fi Network on an HP Printer: Step-by-Step Instructions A detailed guide to changing the Wi-Fi network on different HP printer models. Official methods and solutions. How to connect the HP 107WR printer to WiFi: step-by-step instructions A detailed guide on setting up the HP Laser 107w/107wr. Connecting via WPS, USB cable, and the included software. Setting up the Canon Pixma G3411 via Wi-Fi: Step-by-Step Instructions A complete guide to connecting the Canon G3411 printer to a wireless network. Setting up Wi-Fi Direct, How to Connect the Epson L355 to Wi-Fi: A Complete Guide A detailed guide on setting up a wireless connection for the Epson L355 printer. We'll troubleshoot issues with