Multifunctional device Samsung Xpress M2070FW It remains one of the most popular solutions for small offices and home use due to its reliability and functionality. However, initial wireless setup often raises questions for users accustomed to more modern interfaces or new to laser printers of this class. A proper network connection allows for scanning to PDF directly to the cloud and printing from mobile devices, significantly simplifying document management.
In this article, we'll cover all the possible ways to activate wireless mode, from using the WPS button to manually setting a static IP address via a USB cable. Connection stability The success of the driver directly depends on the correctness of the entered parameters and the device's firmware version, so it's important not to ignore the preparatory stage. We'll cover common errors, troubleshooting methods, and the nuances of driver operation in modern operating systems.
Before proceeding with the software, ensure your MFP is physically ready for use. This includes unpacking, removing all shipping tape, and installing the cartridge. Only then can you choose a method for integrating the device into your local network.
Preparatory stage and equipment testing
The first step is to visually assess the device's condition and check the accessories. Make sure there are enough sheets of paper in the paper tray and the scanner lid is securely closed. For initial setup, you may need to USB cable Type AB (printer), even if you ultimately plan to use only Wi-Fi, as this is the most reliable way to transfer network settings.
Pay attention to the control panel: it should have a button with an image of an antenna or an inscription WirelessThis indicator will indicate the connection status. If the indicator is blinking blue, the device is waiting for a connection or attempting to reconnect. A solid blue indicator indicates a successful connection to the access point.
⚠️ Attention: Before starting the setup, make sure that your router distributes the network in the 2.4 GHz range. Model M2070FW does not support modern 5 GHz networks, and attempting to connect to them will result in an error.
It's also recommended to know your Wi-Fi network password in advance. Unlike smartphones, printers aren't always able to automatically "pick up" saved computer passwords without the use of special utilities. If your password uses complex characters, prepare them for manual entry or choose the WPS method, which avoids this step.
WPS method: quick connection without password
The easiest way to integrate a printer into a network is with the help of technology Wi-Fi Protected Setup (WPS). This method allows you to transfer security settings automatically by pressing the corresponding button on the router. This option is ideal if you don't know the Wi-Fi password or if it contains complex special characters that are difficult to enter using the printer's control panel.
The process is as follows: find the button marked on the body of your router WPS or the two arrows icon. Press and hold it for 2-3 seconds until the WPS indicator on the router starts flashing. Immediately after that, within 2 minutes, press and hold the button. Wireless on the control panel Samsung M2070FW until the Wi-Fi indicator starts blinking quickly.
What to do if WPS doesn't work the first time?
If the indicator stops flashing and turns red or goes out, the timeout has expired. Wait a minute for the printer to completely reset, and then try again. Make sure you're in a strong signal range (no more than 3-4 meters from the router).
The device will automatically detect the network and establish a secure connection. Once successfully configured, the wireless indicator will glow solid blue. You can now proceed to installing the drivers on your computer, selecting the "Network" connection type.
Setup via USB cable and Samsung software
If WPS is unavailable or your router doesn't support it, use the wired method to transfer settings. This is the most reliable option, guaranteeing the correct transfer of the SSID and password. To do this, you'll need to download the full driver package. Samsung Unified Driver from the official support site.
Connect the MFP to your computer using a USB cable and turn it on. Run the driver installer. During installation, the program will detect the device and prompt you to select a connection type. Select the option "Wireless connection"**. The installer will prompt you to change the connection type from USB to Wi-Fi.
☑️ Checklist before installing drivers
Follow the on-screen instructions. The program will ask you to select your network from the list of available networks and enter the password. After confirming the settings, the printer will disconnect from the USB port and attempt to connect to the router. At this point, you can disconnect the cable. Successful installation will result in the printing of a network configuration report, if you selected the appropriate option.
Manually configure IP address and network settings
For advanced users or corporate networks requiring a static IP address, manual configuration is available via the device menu. To access the network settings menu, press the button. Menu on the panel, then use the navigation arrows to navigate to the section Network -> Wireless.
Here you can manually enter the network's SSID. If the network is hidden, this is the only way to connect. This menu also offers the option IP Setting, which allows you to switch the address acquisition mode from DHCP to Static. In this case, you will need to manually enter the IP address, subnet mask, and gateway.
| Parameter | Description | Example of meaning |
|---|---|---|
| SSID | Your wireless network name | Home_WiFi_5G |
| IP Address | The printer's unique address on the network | 192.168.1.55 |
| Subnet Mask | Subnet mask (usually default) | 255.255.255.0 |
| Gateway | Your router's address | 192.168.1.1 |
After entering all parameters, you must save the settings and reboot the device. You can verify the successful configuration by printing a network configuration report from the menu. Report -> Network ConfigThe report will show the current IP address and connection status.
Installing drivers and creating a port in Windows
After connecting the printer to Wi-Fi, the operating system may not detect it automatically if there's no DHCP server on the network or if the drivers aren't installed. In Windows 10 and 11, the installation process often occurs automatically through Windows Update, but for full scanner functionality, it's best to use the original software.
If the automatic search does not yield any results, go to Parameters -> Devices -> Printers and scannersClick "Add a printer or scanner." When prompted, "The printer you want isn't listed," select "Add by IP address." Enter the address you found in the configuration report or the device menu.
It's important to select the correct port. Create a new standard TCP/IP port and enter the IP address. When selecting a driver, specify the manufacturer. Samsung and the model M2070 SeriesIf the system prompts you for a driver, specify the path to the previously downloaded file or select the update via Windows Update.
⚠️ Note: Operating system interfaces may be updated. If you can't find the "Add by IP" option, search for "Device and Printer Management" in Settings to access the classic menu.
Diagnosing problems and printing a report
If the connection is unsuccessful, the Wi-Fi indicator on the printer will blink or remain red. The first step in troubleshooting should always be printing a network configuration report. This document contains all technical information about the current status of the communication module.
To print the report, click the button Menu, go to the section Report, select Network Config and press OK. Study the line IP Address: if it is indicated there 0.000.000.000 or Auto IP, then the printer hasn't received an address from the router. Check if the DHCP server is enabled on your router.
Also, check the signal strength in the report. If it's very low, try moving the router closer to the printer or using a Wi-Fi repeater. Sometimes the issue lies in the router's security settings: try temporarily disabling MAC address filtering if it's enabled.
Mobile printing and additional features
Once Wi-Fi is successfully set up, mobile printing options are available to you. Model M2070FW supports AirPrint technology for Apple devices and Google Cloud Print (via middleware), as well as an app Samsung Mobile Print for Android and iOS.
To print from your smartphone, make sure your mobile device is connected to the same Wi-Fi network as your printer. In the app, select a document or photo, click the print button, and select your MFP from the list. Print quality and available settings will depend on the capabilities of the driver installed on the print server or the device itself.
Don't forget to check for firmware updates periodically. The manufacturer may release patches that improve the stability of the wireless module and compatibility with new routers. The update can be performed using the utility. SyncThru Web Serviceby entering the printer's IP address in the browser's address bar.
Why doesn't the printer see the 5 GHz network?
The Wi-Fi module in the M2070FW model operates exclusively in the 2.4 GHz band. This is the standard for most printing devices of this generation. Routers broadcasting the same network with the same name (SSID) for both 2.4 and 5 GHz can cause conflicts. We recommend separating the networks in your router settings by giving them different names, such as HomeWiFi and HomeWiFi_5G, and connecting the printer only to the former.
How do I reset my printer's network settings?
If you've changed your router or password, you'll need to delete the old settings. Go to the printer menu and select Network -> Clear Network Settings (or a similar option depending on the firmware version). Confirm the action. After this, the printer will return to the factory network settings, and the Wi-Fi indicator will begin blinking, waiting for a new configuration.
Is it possible to connect a printer to a hidden network?
Yes, this is possible, but only through manual configuration in the printer's menu or via the USB setup utility. Automatic network search (Scan) will not reveal hidden SSIDs. You will need to manually enter the exact network name and encryption type (usually WPA2-PSK).