How to Connect the HP LaserJet M15w Printer to Wi-Fi: 3 Proven Methods

HP LaserJet M15w — a compact monochrome laser printer ideal for home use or a small office. Its main advantage is wireless connectivity, which eliminates the need for cables and allows printing from any device on the network. However, many users encounter difficulties when first connecting the printer to Wi-Fi. In this article, we'll cover the process. all possible ways of customization, including connection via WPS, application HP Smart and manual entry of network parameters.

Feature of the model M15w The lack of a screen—control is via indicator lights and a button. This simplifies the design, but requires a more careful approach to setup. If you've never worked with network printers before, don't worry: following our instructions, you'll be up and running in no time. 5-10 minutesAnd if any errors arise, we've provided solutions to the most common problems at the end of the article.

1. Prepare the printer and network before connecting

Before you begin setting up Wi-Fi, make sure your printer and your network are ready to connect. Neglecting this step often leads to failures when HP LaserJet M15w does not see the network or refuses to connect.

First, check physical condition of the printer: It should be plugged into a power outlet, and the power light should be green (or blinking if the printer hasn't been configured yet). Make sure there's paper in the tray—you'll need this to print a test page with network settings. Also, pay attention to the printer's location: it should be within range of a strong Wi-Fi signal. If the router is in another room and the signal is weak, the connection may drop.

Secondly, prepare your Wi-Fi network details:

• 📡 Network name (SSID) — the exact name, including case and spaces.
• 🔑 Password If you don't remember it, look at the router sticker or in the settings of the device from which you are connected to this network.
• 📶 Security type - usually WPA2-PSK or WPA3-PSK. Obsolete WEP or open networks are not supported.

If your router uses dual frequency band (2.4 GHz and 5 GHz), printer HP LaserJet M15w works only with 2.4 GHzMake sure the network with that name is active, or temporarily disable 5 GHz in your router settings. Also, check if the mode is enabled. 802.11r (Fast Transition) - it can interfere with the connection.

⚠️ Attention: If your network uses MAC address filtering, add the printer's MAC address to the list of authorized devices in advance. You can find it on the sticker on the back of the printer or by printing a self-test page (hold the power button for 5 seconds).

2. Method 1: Connecting via WPS (the fastest method)

Technology WPS (Wi-Fi Protected Setup) Allows you to connect your printer to the network without entering a password—just press a button on the router. This is the easiest method if your router supports WPS. Make sure the feature is enabled: there's usually a button labeled WPS or the 🔄 icon.

Connection instructions:

1. Turn on the printer HP LaserJet M15w and wait until the power indicator turns green.
2. Hold the button Wi-Fi (or Wireless network) on the printer 3 secondsuntil the wireless indicator starts flashing blue.
3. For 2 minutes press the button WPS on the router. The printer's indicator light should stop blinking and turn blue—this means the connection is established.

If the indicator continues to flash or remains orange, repeat the process. Possible reasons for failure:

• 🕒 WPS timed out (repeat from step 2).
• 🔌 WPS is disabled in the router settings (enable it in the web interface).
• 📡 The router does not support WPS (use another method).

The printer is turned on and the green indicator is on|

The WPS button on the router is available and active|

The Wi-Fi light on the printer is blinking blue|

Connection initialized within 2 minutes-->

Once connected, print a network settings page to ensure the settings are correct. To do this, hold down the power button. 5 seconds — the printer will issue a sheet of information, including IP address And SSID.

3. Method 2: Connecting via the HP Smart app

Application HP Smart — official tool from HP, which simplifies printer setup. It automatically finds devices on the network and offers step-by-step instructions. This method is convenient if you have a smartphone or tablet with Android or iOS.

Download the app from the official store:

• 📱 Android — Google Play Market.
• 🍎 iOS — App Store.

Make sure your mobile device is connected to the same Wi-Fi network you want to connect the printer to.

Next, follow the instructions:

1. Open HP Smart and press Add a printer.
2. Select Setting up a new printer → LaserJet M15w.
3. The app will prompt you to enable Bluetooth on your phone to search for the printer. Follow the prompts.
4. Once the printer is found, select your Wi-Fi network from the list and enter the password.
5. Wait for the setup to complete (may take up to 2 minutes).

If the printer is not found, check:

• 🔋 Bluetooth is enabled on the phone and the printer is nearby (no further than 1 meter).
• 📶 The printer is turned on and the Wi-Fi indicator is blinking (ready to connect).
• 🔄 Restart the app HP Smart and try your search again.

After a successful connection, the app will prompt you to print a test page. Save it—it contains IP address printer, which will be needed to add it to your computer.

4. Method 3: Manual Wi-Fi setup via computer

If WPS is not supported and the application HP Smart not available, you can connect the printer manually via USB cable (included) and a web interface. This method requires more steps, but is reliable.

Connect the printer to your computer or laptop using a USB cable. Make sure the drivers are installed (if not, download them from official HP website). Then:

1. Open Control Panel → Devices and Printers (Windows) or System Preferences → Printers & Scanners (macOS).
2. Find HP LaserJet M15w in the list and click Printer properties.
3. Go to the tab Ports and press Add port → Standard TCP/IP Port.
4. Enter Printer IP address (can be found on the test page or in the router settings) and confirm.
5. Go back to the printer properties, open Wireless network settings and enter your Wi-Fi details manually.

If the printer's IP address is unknown, you can find it out as follows:

• 🖨️ Print a self-diagnosis page (hold the power button for 5 seconds).
• 🌐 Check the list of connected devices in the router's web interface (usually at 192.168.1.1 or 192.168.0.1).

⚠️ Attention: When setting up manually, make sure that the network settings are correct. DNS serverIf the printer does not receive an IP address automatically (DHCP), assign it a static address in the range of your local network (for example, 192.168.1.100).

5. Checking the connection and troubleshooting

After setting up Wi-Fi, you need to make sure the printer is properly connected to the network and ready to print. Here's how:

1. Print the network configuration page: Hold the power button for 5 seconds. There should be a line on the sheet Wi-Fi: Connected and correct IP address.

2. Check the printer's availability from other devices: Try adding it to your smartphone or a second computer via the same network.

3. Submit a test document: for example, from the application HP Smart or via the standard print dialog in Windows/macOS.

If the printer does not print or is not visible on the network, check:

• 🔌 Power and connection: The Wi-Fi indicator is blue (connected) or flashing orange (error).
• 📡 Router signal: The printer must be within range. Try rebooting your router.
• 🔒 Firewall/antivirus: Temporarily disable them on your computer if the printer is not detected.
• 🔄 Reconnection: Remove the printer from the device list and add it again.

What should I do if my Wi-Fi indicator is flashing orange?

Orange blinking indicates a connection error. Possible causes:

1. Incorrect password — check the case and symbols.

2. Incompatible security type - change the router settings to WPA2-PSK.

3. Weak signal — move the printer closer to the router or use a repeater.

4. IP conflict — assign a static IP address to the printer in the router settings.

If the problem persists, reset the printer (hold the Wi-Fi button for 10 seconds) and try setting it up again.

A critical feature of the M15w model: the printer does not support networks with a hidden SSID. If your Wi-Fi network is not broadcasting its name (it's hidden), you'll need to temporarily make it visible or use a different connection method.

6. Setting up the printer on different devices

After connection HP LaserJet M15w You need to add it to your Wi-Fi network on the devices you plan to print from. The process varies depending on your operating system.

On Windows 10/11:

1. Open Settings → Devices → Printers & Scanners.
2. Click Add a printer or scanner.
3. Select HP LaserJet M15w from the list. If it is not there, click The printer you need is not in the list and enter the IP address manually.

On macOS:

1. Open System Preferences → Printers & Scanners.
2. Click + → tab IP.
3. Enter the printer's IP address and select the driver. HP LaserJet M15w and add.

On Android/iOS:

• Use the app HP Smart (described above).
• Or add a printer through the print settings in a document (for example, in Google Docs or Pages).

⚠️ Attention: On some versions of Windows, you may need to install the driver manually. Download it from HP website, choosing a model LaserJet M15w and your OS. Installation via device Manager (update driver) often solves recognition problems.

7. Common problems and their solutions

Even after successfully connecting to Wi-Fi, users still encounter errors. We've compiled the most common ones and how to fix them.

If the printer is connected but printing is delayed, try:

• 📶 Change the Wi-Fi channel in your router settings (select a less busy one, for example, 1 or 11).
• 🔄 Restart the printer and router.
• 🖨️ Reduce the print quality in the driver settings (for example, from 600 dpi to 300 dpi).

8. Alternative connection methods

If you connect HP LaserJet M15w If you can't connect to Wi-Fi, consider alternative options:

1. Connection via USB:

• 🖥️ Suitable for continuous work with one computer.
• 🔌 Use the included cable (USB Type-B).
• 📄 Printing is only possible from a connected PC.

2. Using HP Wireless Direct:

This feature allows you to connect to a printer directly, without a router. To activate it:

1. Hold the button Wi-Fi on the printer 5 seconds, until the indicator starts flashing.
2. On your computer or smartphone, connect to the network named DIRECT-xx-HP LaserJet M15w.
3. The password is indicated on the printer sticker or in the instructions.

Disadvantage: Only one device can be connected to the printer at a time.

3. Connecting via Ethernet adapter:

Model M15w does not have a built-in Ethernet port, but can be used USB-Ethernet adapter (Check compatibility on the HP website). This is especially true for offices with unstable Wi-Fi.

FAQ: Answers to Frequently Asked Questions

Can the HP LaserJet M15w be connected to 5GHz Wi-Fi?

No, the printer only supports networks. 2.4 GHzIf your router broadcasts both frequencies under the same name (SSID), the printer will automatically connect to 2.4 GHz. If the networks are separate, select the network with the postfix _2G or 2.4G.

The printer is connected to Wi-Fi, but the computer can't see it. What should I do?

Check:

1. The computer and printer are on the same network.
2. Firewall or antivirus software does not block device detection.
3. The printer's IP address does not conflict with other devices.

Try adding the printer manually by IP address (see section 4).

How do I reset my printer's Wi-Fi settings?

To reset network settings, hold the button Wi-Fi on the printer 10 secondsuntil the indicator light starts flashing rapidly. After this, the printer will return to factory settings, and you can set up the connection again.

Is it possible to connect the printer to a public Wi-Fi network (for example, in a cafe)?

Technically yes, but it comes with risks:

• Public networks often require authentication through a browser, which is not possible with a printer.
• There is no encryption (or it is used) WPA2-Enterprise, which is not supported).
• High risk of data interception when printing confidential documents.

Better to use HP Wireless Direct or USB cable.

How do I update my printer firmware to improve Wi-Fi performance?

Updating the firmware may resolve connection issues. This can be done via:

1. Application HP Smart (chapter Printer Settings → Software Update).
2. HP official website - download the firmware file and update via USB.

Do not interrupt the update process!