How to Recover a Wi-Fi Password on a Huawei Router: All the Working Methods

• By default, the login and password are - admin/admin (or telecomadmin/admintelecom for routers from providers).
• If the data has changed, try the combinations from the table below.

Router model	Default login	Default password
Huawei HG8245H, HG8247H	telecomadmin	admintelecom
Huawei B525, B535	admin	admin or an empty field
Honor Router 3, WS5200	admin	Last 8 characters SSID (network name)
Huawei E5577 (mobile router)	admin	3gadmin or wlan1234

After successful login, go to the section Wi-Fi → Security Settings (or WLAN → Security in English-language firmware). Here in the field Password (Password/Pre-Shared Key) the current network key will be displayed. To change it, enter a new password (minimum 8 characters, supported by WPA2-PSK) and save the settings.

⚠️ Attention: If you see the message This page is unavailable or 404 Not Found, then the router is using a non-standard port for access. Try entering 192.168.1.1:8080 or 192.168.100.1:80Also check if your antivirus or VPN is blocking access.

Connecting to a router via cable or Wi-Fi|Disabling VPN/proxy in the browser|Ensuring that the IP address is entered correctly (without http://)|Trying to log in in different browsers (Chrome, Firefox, Edge)|Resetting the browser cache (Ctrl+Shift+Del)-->

2. Using the WPS button to connect without a password

If you urgently need to connect your device to Wi-Fi, but you don’t remember the password, you can use the function WPS (Wi-Fi Protected Setup). This method only works for devices that support WPS (most smartphones on Android and some models Windows).

Instructions:

1. On the router Huawei find the button WPS (usually it is labeled and located on the back panel next to the ports).
2. Press and hold it for 3-5 seconds until the indicator WPS will not start blinking.
3. On the device you want to connect:
   • 📱 On Android: go to Settings → Wi-Fi → Advanced → WPS Connection.
   • 💻 On Windows: Select a network from the Wi-Fi list, press Connect using WPS.
• Wait for automatic connection (usually takes 10-30 seconds).

After connecting via WPS You can log into the router's admin panel (as in the first method) and view or change the Wi-Fi password. Please note: the function WPS may be disabled in the security settings - in this case, the method will not work.

⚠️ Attention: Some providers (eg. Rostelecom or Beeline) turn off WPS On rented routers by default. If the button doesn't respond, check its status in the section Wi-Fi → WPS admin panels.

Why is WPS considered insecure?

The WPS function is vulnerable to brute-force attacks due to its simplified authentication algorithm. An attacker can crack the PIN code in a few hours, even if the network is protected by a strong password. In modern Huawei routers (for example, the series AX3) WPS is disabled by default or works only in PBC (push-button) mode, which reduces risks.

3. Password recovery via the Huawei HiLink app

For smartphone owners on Android or iOS The easiest way is to use the official app Huawei HiLink (previously Huawei Mobile WiFi). It allows you to manage your router remotely, including viewing and changing your Wi-Fi password.

Step-by-step instructions:

1. Download the app:
   • 📱 Android: Google Play (search for "Huawei HiLink")
   • 🍎 iOS: App Store (not available in all countries)
• Connect your smartphone to the router's network (even without internet access). If Wi-Fi is not available, use LAN cable with adapter USB-C/Lightning → Ethernet.
• Open HiLink and wait for the app to detect the router. Tap its name in the list.
• Enter the administrator login and password (default - admin/admin).
• Go to the section Wi-Fi or Network settings — your current password will be displayed here (hidden under the asterisks). Click the eye icon 👁️ to see it.

If the app doesn't find your router, check:

• 🔄 Updated HiLink (patches for new models are often released in the Play Market).
• 📡 Connect to the correct network (the router name is indicated on the sticker).
• 🔒 Disable VPN or firewall on your smartphone.

4. Reset the router to factory settings

If you don’t remember your Wi-Fi password or your admin panel login details, there’s only one radical method left: hard reset (full reset). This method will return the router to its out-of-the-box state, including:

• 🔑 Wi-Fi password (standard, indicated on the sticker).
• 🔐 Administrator login/password (admin/admin).
• ⚙️ All user settings (port forwarding, parental controls, etc.).

How to perform a reset:

1. Find the button on the back of the router. Reset (usually it is recessed into the body to avoid accidental pressing).
2. Take a paper clip or a toothpick, press and hold the button for 10-15 seconds until the indicators start flashing randomly.
3. Release the button and wait for the reboot (1-2 minutes).

After reset:

• Network name (SSID) and the password will be the same as on the sticker under the router (for example, HUAWEI-XXXX with an 8-digit password).
• If the router is rented from a provider, you may need to re-authorize on the network (login details are usually specified in the contract).

⚠️ Attention: On some models Huawei (For example, B525) reset button Reset does not reset the Internet connection settings (if the provider uses binding by MAC). However, all user settings (including the Wi-Fi password) will be lost.

Resetting the router to factory settings|Logging in via the web interface|Huawei HiLink app|WPS button|Another method-->

5. Alternative methods: if nothing helps

In rare cases, standard methods don't work. Let's consider some less obvious solutions:

Method 1: View the password on the connected device

If you already have a laptop connected to your network Windows or Mac, you can extract the password from the saved data:

• 🪟 Windows 10/11:
  1. Open Settings → Network & Internet → Wi-Fi → Manage known networks.
  2. Select your network, click Properties.
  3. In the line Network security password click Show symbols.
• 🍎 macOS:

  Open Terminal and type:
  security find-generic-password -wa "NAZVANIE_SETI"

  (replace NAZVANIE_SETI to the name of your network).

Method 2: Connecting via Telnet (for advanced users)

Some models Huawei (For example, HG8245) allow you to access the settings through Telnet, if the feature is enabled. To do this:

1. Install PuTTY (For Windows) or use the built-in Terminal (Mac/Linux).
2. Connect to the router's IP port 23:

   telnet 192.168.1.1 23

3. Enter login/password (default - root/admin or telecomadmin/admintelecom).
4. Run the command to view the Wi-Fi configuration:

   display current-configuration | include wlan

⚠️ This method requires knowledge of working with CLI and may disrupt the router's operation if commands are incorrect. Use it only if other methods have failed.

Method 3: Contacting your provider

If the router is rented from an Internet provider (for example, Dom.ru, Third Transport Ring), you can:

• 📞 Call support and ask to reset your Wi-Fi password (you will need to provide your contract details).
• 📧 Write to the technical support chat (in your personal account on the provider's website).
• 🏠 Visit the company's office with your passport and contract—they'll help you reconfigure your router.

⚠️ Attention: Providers rarely provide access to the admin panel of rented routers. More often, they offer to replace the device or reset its settings remotely (which is equivalent to hard reset).

6. How to avoid losing your password in the future

To avoid the problem of a forgotten password, follow these simple rules:

• 📝 Save data:
  • Take a photo of the sticker on the router (with the factory password) and save the photo to the cloud (Google Drive, iCloud).
  • Create a text file with passwords and store it in an encrypted archive (for example, through 7-Zip with a password).
• 🔄 Use password managers:
  • Apps like KeePass, 1Password or Bitwarden allow you to store Wi-Fi passwords in a secure manner.
  • On Android Network passwords are automatically saved in Settings → Google → Manage Google Account → Security → Password Manager.
• 🔧 Set up backup access:
  • Turn on the function Guest network with a separate password (it can be shared with friends without revealing the main key).
  • Activate WPS only when necessary and turn off after use.

Important: If you changed the default router administrator password but didn't write it down, you won't be able to restore access without a factory reset. Even Huawei support won't be able to help, as the data is stored only in the device's memory.

FAQ: Frequently asked questions about password recovery on Huawei

❓ Is it possible to recover a Wi-Fi password without resetting the router?

Yes, if you remember the administrator login/password for logging into the web interface (192.168.1.1). In this case, just go to settings Wi-Fi and see the current key. The button will also help WPS (if activated) or application Huawei HiLink.

❓ What should I do if my router doesn't connect to the internet after resetting it?
Most likely, the reset reset your ISP connection settings. You need to:
1. Check with your provider for the connection type (PPPoE, DHCP, L2TP) and login details (login/password).
2. Login to the router admin panel (192.168.1.1) and enter the parameters in the section Internet or WAN.
3. If the provider uses binding by MAC, it may be necessary to clone MAC address old device.
Why doesn't the Huawei HiLink app detect my router?

The problem may be as follows:

• The router does not support management via HiLink (valid for older models up to 2018).
• The device is connected to another network (check the Wi-Fi name).
• The protocol is disabled in the router. TR-069 (needed for remote control). Included in Settings → Remote Control.

Try connecting via cable or using the web interface.

❓ How do I find out the model of my Huawei router?

The model is indicated:

• On a sticker on the bottom or back of the device (e.g. HUAWEI HG8245H).
• In the web interface in the section System Tools → Device Information.
• In the appendix HiLink on the main screen.

If the sticker has worn off, take a photo of the router and find a similar model online based on its appearance.

❓ Is it possible to hack a Huawei Wi-Fi password?

Technically possible, but:

• ⚠️ This violates the law (Article 272 of the Criminal Code of the Russian Federation - "Unauthorized access to computer information").
• Modern routers Huawei use WPA2/WPA3, which are resistant to brute force (password guessing).
• Most "hacks" only work with weak passwords (eg. 12345678).

If we are talking about in his own router, it's easier to reset the settings or contact your provider.