Many users are familiar with the situation when they urgently need to connect a new device to a wireless network, but the password is lost or forgotten. Routers of the brand ZTE They are widely used due to their availability and stable operation, but their setup interface can be confusing for beginners. There are several ways to restore network access without resorting to complex technical manipulations.
There are standard methods that allow you to find out security key without resetting the device. Most often, the information you need is hidden deep within the web interface or duplicated on the device's physical casing. In this article, we'll cover the steps for different models, including popular series. F670, H108N And MF831.
Before resorting to drastic measures like a hard reset, it's worth checking the default data storage locations. Users often change security settings themselves but don't remember the new values, even though the factory settings may still be intact in another menu tab.
Find the password on the device body and in the documentation
The fastest and most reliable way to find out your connection details is to physically inspect your router. This information is found on the bottom or back panel of almost all modern models. ZTE An information sticker is located there. This is where the manufacturer places the factory settings, which are in effect immediately after purchase.
You need to find the line with the name WPA/WPA2 Key, Wireless Key or simply PasswordThe SSID—the network name—is usually listed next to it, and by default, it matches the device model or serial number. If you've never manually changed security settings, the symbol combination on the sticker will be valid.
- 🔍 Carefully inspect the sticker in good lighting, as the font may be small.
- 📝 Write down the data in a notepad or save it in your phone's notes for future use.
- 📄 Check the original box or instructions if the sticker on the router has worn off.
It's worth keeping in mind that if the router was used by previous tenants or the provider, the settings may have been changed. In this case, the information on the sticker won't work, and you'll have to search for the saved password on an already connected computer or smartphone.
⚠️ Attention: Do not scratch or try to remove the factory sticker, as it also contains the MAC address and quick setup PIN, which may be needed when flashing the firmware.
Login to the router settings web interface
If the sticker doesn't help, the next step is to access the device's software. The web interface is the control panel where you configure all network settings, including encryption. To access it, you'll need any browser and a device connected to the router via cable or Wi-Fi.
You need to enter the gateway IP address in the browser address bar. For most devices ZTE This 192.168.0.1 or 192.168.1.1Sometimes providers change the default address, so you can check it in your computer's network settings. After entering the address, the system will ask for a username and password to log in to the admin panel.
The default login credentials are often found on the same sticker as your Wi-Fi password. Typically, it's a pair admin/admin or admin/1234However, providers may set their own unique combinations, which are issued upon signing a contract.
| Router model | Standard IP address | Default login | Default password |
|---|---|---|---|
| ZTE F670 | 192.168.1.1 | admin | admin |
| ZTE H108N | 192.168.1.1 | admin | admin |
| ZTE MF831 | 192.168.0.1 | admin | admin |
| ZTE ZXHN H198A | 192.168.1.1 | user | user |
After successful authorization, you'll be taken to the main menu, where you'll find the section responsible for wireless networking. The interface may differ depending on the firmware version, but the layout remains the same.
Viewing the password in the Wireless Settings menu
Once inside the control panel, you need to find the tab responsible for Wi-Fi settings. In the interfaces ZTE it is often called WLAN, Wireless or Network. Within this section, look for the subsection Security or WLAN Security.
This is where the current encryption type (usually WPA2-PSK) and the password itself are displayed, hidden by asterisks or dots. To see it, find the checkbox. Show Password or Display Password and activate it. After this, the text field will become readable.
☑️ Check security settings
Some older firmware versions may not have the password display feature. In this case, you can simply replace the old value with a new one you'll definitely remember. Don't forget to press the button Apply or Save to save the changes, otherwise the settings will be reset after reboot.
⚠️ Attention: After changing the password in the web interface, all connected devices will lose connection to the network. You will have to re-enter the new security key on each device.
Using a mobile app to control
Modern routers ZTE often support control through dedicated smartphone apps, such as ZTE Home or proprietary utilities from providers. This is a convenient way to set up without having to find a computer.
After installing the app and linking your device (usually by scanning a QR code or automatically searching on your local network), you gain access to basic features. The current password is often displayed in the "My Devices" or "Wi-Fi Settings" section, which can be copied to the clipboard.
What should I do if the app doesn't see the router?
Make sure your smartphone is connected to the router's Wi-Fi network, not your mobile data plan. Also, check that geolocation is enabled, as it's required for the network scanner to work on Android and iOS.
The advantage of mobile apps is the ability to generate a QR code for guests. You can simply show your phone screen, and guests can connect by scanning the code with their camera, without having to spell out complex symbols.
How to find out the password on a connected Windows PC
If a Windows computer is already connected to your network, the system may have saved the password. This is the easiest way to restore access without accessing the router's settings. The steps depend on the operating system version.
In Windows 10 and 11, open Settings from the Start menu, then go to Network and InternetSelect "Network and Sharing Center" or click on the properties of your active connection. In the window that opens, click "Wireless Network Properties."
In the new window, go to the tab SecurityYou'll see a "Network Security Key" field with hidden characters. Check the box next to it. Show entered characters, and the system will show the password in clear text.
For Windows 7, the process is slightly different: right-click the Wi-Fi icon in the system tray, select "Network and Sharing Center," click on the network name, and then follow the same steps through the wireless network properties.
Resetting the router to factory settings
If none of these methods work, or you don't know the password to access the web interface, your last option is a hard reset. This will return the router to its original state when you bought it.
There is a small hole on the back of the device with the inscription Reset or DefaultTo activate the function, press the button with a paperclip or toothpick and hold it for about 10-15 seconds until the indicators flash simultaneously. After this, the router will reboot.
After rebooting, the Wi-Fi password will be the one on the sticker. You can connect and reconfigure the network to suit your needs, setting a new, strong password.
⚠️ Attention: Interfaces and menu layouts may vary depending on the firmware version installed by your provider. If you're unsure, it's best to contact your provider's technical support.
Frequently Asked Questions (FAQ)
What should I do if the password sticker is worn off or peeled off?
In this case, the only solution is to log in to the web interface via a cable or find the saved password on an already connected device. If the password has been changed and is no longer remembered, you'll have to reset the settings using the Reset button.
Is it possible to find out someone else's ZTE Wi-Fi password remotely?
This is impossible without physical access to the router or the admin panel. Hacking into other people's networks is illegal. This article describes only legal methods for restoring access to your own equipment.
Why doesn't my ZTE router allow me to access settings at 192.168.1.1?
The gateway IP address may have changed. Check your computer's network adapter settings; the "Default Gateway" line will show the current address. The issue may also be related to connecting via Wi-Fi instead of a cable.
How to create a strong Wi-Fi password after recovery?
Use a combination of uppercase and lowercase letters, numbers, and special characters. Your password should be at least 8-10 characters long. Avoid using birthdays or simple sequences like 12345678.