How to Connect the Samsung M2070W Printer to Wi-Fi: A Complete Guide with Pictures

Connecting a printer Samsung M2070W Connecting to a wireless network is a challenge many users face when switching to remote printing. This model, released in 2013, remains popular due to its compact size and Wi-Fi Direct support. However, not everyone knows that stable operation requires proper configuration of both the device itself and the router. In this article, we'll cover all connection methods—from automatic WPS before manually entering network parameters, and we will also look at typical errors and their solutions.

Peculiarity M2070W is the absence of a display: all settings are made through button combinations or software Samsung Easy Printer ManagerThis makes the process more complicated for beginners, but with the right approach it takes no more than 10 minutes. It's important to note that the printer only supports networks. 2.4 GHz - if your router operates in the range 5 GHz, additional configuration will be required.

This article will be useful for owners Windows 10/11, macOS and mobile devices on Android/iOSWe will also cover security issues (for example, why you shouldn't use WPS PIN) and signal optimization for stable printing. If you previously tried connecting the printer but encountered errors like "Unable to find network" or "Connection Error" — here you will find solutions.

1. Preparing the printer and network for connection

Before setting up Wi-Fi, make sure the printer is Samsung M2070W ready for use. Connect it to the power supply and wait for the initialization process to complete (the indicator Power (It should be green.) If the printer was previously used in wired mode, disconnect the cable. USB or Ethernet - their presence may block wireless setup.

Next, check your router settings:

• 📶 Network range: The printer only works with 2.4 GHzIf the router supports 5 GHz, make sure the network 2.4 GHz is turned on and has a unique name (SSID).
• 🔒 Security type: recommended WPA2-PSK (AES). WEP And WPA-TKIP are not supported or work unstable.
• 📡 Wi-Fi channel: Avoid automatic selection. It is better to fix the channel (for example, 6 or 11) to minimize interference.
• 🔄 Compatibility mode: turn it off 802.11n Only, if it is enabled, the printer supports the standard 802.11b/g/n.

If you don't know how to change these settings, please refer to your router's manual. For most models, TP-Link, ASUS or Keenetic the path will be like this: 192.168.1.1 → Wireless Network → Wi-Fi SettingsDon't forget to save the changes and reboot the router.

⚠️ Attention: If your network uses guest mode or client isolation, the printer will not be able to connect. Disable these features during setup.

2. Connection methods: WPS vs. manual setup

There are two main connection methods Samsung M2070W to Wi-Fi: via WPS (automatic) and manual. The choice depends on your router's capabilities and preferences. Let's consider both options.

2.1. Connecting via WPS (recommended method)

Technology Wi-Fi Protected Setup (WPS) Allows you to connect your device without entering a password. To do this:

1. Make sure WPS is enabled on your router (usually there is a physical button or an option in the web interface).
2. On the printer, press and hold the button Wi-Fi (with the antenna icon) for 3 seconds until the indicator starts flashing.
3. Press the button within 2 minutes WPS on the router. Indicator Wi-Fi on the printer it should light up green.

If the connection does not occur, repeat the process or check if your router supports it. WPS Push Button (Some models require entering a PIN code, which is less secure).

2.2. Manual setup via Samsung Easy Printer Manager

If WPS is unavailable or does not work, use software Samsung Easy Printer Manager:

1. Download and install the utility from official Samsung website (select model M2070 Series).
2. Connect the printer to the computer via USB (temporary connection for setup only).
3. Run the program, go to Settings → Wireless Network and select your network from the list.
4. Enter your Wi-Fi password and wait for connection confirmation.

After successful setup, disable USB cable — the printer must remain online. If the program doesn't see the printer, check the drivers or try a different port.

Install Samsung Easy Printer Manager|Connect the printer via USB|Launch the program and select "Wireless Network"|Enter the SSID and password|Disconnect the USB after setup-->

3. Setting up the printer on different devices

After connection M2070W To connect to Wi-Fi, you need to add it to the system. The process varies depending on the operating system.

3.1 Connecting to Windows 10/11

IN Windows The printer is added automatically or manually:

1. Open Settings → Devices → Printers & Scanners.
2. Click Add a printer or scannerThe system must find Samsung M2070W.
3. If the printer is not detected, select The printer you need is not in the list and enter its IP address (can be found in Samsung Easy Printer Manager).

For stable operation, install the driver from the official website. Automatic installation via Windows Update may result in printing errors.

3.2. Connecting to macOS

On Mac:

1. Open System Preferences → Printers & Scanners.
2. Click +, select the tab IP and enter the printer address (for example, 192.168.1.100).
3. In the field Protocol please indicate Line Printer Daemon - LPD.
4. Install the driver Samsung M2070 Series from the list.

If your printer does not print, check your firewall settings (System Preferences → Security & Privacy) - it can block the connection.

3.3. Printing from Android/iOS

For mobile devices:

• 📱 Android: use the app Samsung Mobile Print (available in Google Play). After installation, the printer should be detected automatically.
• 🍎 iOS: open the document, click Share → Print and select Samsung M2070W from the list.

If your printer is not showing up, make sure your smartphone and printer are connected to the same Wi-Fi network. iPhone You may need to install a printer profile via Samsung Easy Printer Manager on the computer.

⚠️ Attention: On some firmware versions Android 12+ application Samsung Mobile Print may not work. In this case, use alternatives like PrinterShare or set up cloud printing via Google Cloud Print (if supported).

4. Checking the connection and diagnosing errors

After setup, check the connection status:

• 🟢 Wi-Fi indicator Lights up green - the printer is connected.
• 🟡 Blinking orange - connection error (check your password or network range).
• ❌ Off - Wi-Fi is disabled (press the button) Wi-Fi for 3 seconds).

If the printer does not print, run diagnostics:

To reset the printer, press and hold the button Cancel (Cancel) within 10 seconds. Then, try setting up Wi-Fi again.

5. Optimize Wi-Fi for stable printing

To avoid connection problems, follow these tips:

• 📶 Location: Place the printer no more than 5 meters from the router. Walls and metal objects weaken the signal.
• 🔄 Wi-Fi channel: use network analyzers (eg Wi-Fi Analyzer For Android) to select the least loaded channel.
• 🔌 Nutrition: Connect the printer to the network through a surge protector - power surges can disrupt the settings.
• 🔒 Safety: turn it off WPS Once configured, this protocol is vulnerable to hacking.

If you have a lot of devices on your network, consider creating a separate SSID for the printer. This will reduce the load on the main network and improve printing stability.

How to check the Wi-Fi signal quality on a printer?

To find out the signal level, print Network report:

1. Press and hold the button Wi-Fi 5 seconds.

2. The printer will print a sheet with network parameters, including Signal level (optimally: >70%).

If the value is below 50%, move the printer or router.

6. Alternative connection methods

If Wi-Fi setup is not possible, consider alternative options:

6.1. Wi-Fi Direct

Samsung M2070W supports Wi-Fi Direct — direct connection technology without a router. To do this:

1. On the printer, press and hold Wi-Fi 5 seconds until the indicator flashes Direct.
2. On your computer or smartphone, find the network with the name DIRECT-xx-Samsung M2070.
3. Connect to it (the password is usually 12345678 or indicated on the printer sticker).

Once connected, the printer will only be accessible from this device. Printing from other devices will require repeating the process.

6.2. Connecting via USB or Ethernet

If wireless methods don't work:

• 🔌 USB: Connect the printer to your computer using a cable. The drivers will install automatically (or download them from the Samsung website).
• 🌐 Ethernet: if the model supports LAN, connect the cable to the router. The printer will receive an IP address via DHCP.

For Ethernet Manual IP address configuration may be required Samsung Easy Printer Manager (path: Settings → Network → Wired Network).

7. Common mistakes and their solutions

Even after successful setup, problems may still arise. Here are the most common ones and how to fix them:

7.1. Printer not found on the network

If the device does not appear in the list of available ones:

• Check that the printer and computer are connected to the same network.
• Disable your firewall or antivirus (they may be blocking detection).
• Assign a static IP address to the printer in your router settings.

7.2. Error "Unable to connect to printer"

This error is often associated with:

• Incorrect driver (download the latest version from the Samsung website).
• IP address conflict (reboot the router and printer).
• Outdated printer firmware (update via Samsung Easy Printer Manager).

7.3. Printing is very slow

Reasons and solutions:

• Weak Wi-Fi signal → move the printer closer to the router.
• Large document size → try printing in mode Draft.
• Network congestion → turn off other devices or change the Wi-Fi channel.

If the problem persists, try connecting the printer via USB and print a test page. This will help determine if the error is related to the wireless connection.

⚠️ Attention: On some routers (for example, MikroTik) the function can be enabled Client Isolation, which blocks devices from interacting with each other on the network. Disable it in the settings. Wireless → Security Profile.

FAQ: Answers to frequently asked questions

Can the Samsung M2070W be connected to a 5GHz network?

No, the printer only supports a range 2.4 GHzIf your router is in the mode 5 GHz, turn on the broadcast 2.4 GHz or create a separate network for this range.

How do I reset my printer's Wi-Fi settings?

Press and hold the button Cancel (Cancel) for 10 seconds. The indicators will flash, and the printer will return to factory settings. Then, repeat the connection process.

Why does my printer periodically disconnect from Wi-Fi?

This may be due to:

• Power saving mode (disable it in the printer settings).
• Weak signal (check the signal level through the test report).
• IP address conflict (assign a static IP in the router).

Is it possible to connect a printer to multiple networks?

No, Samsung M2070W It only remembers one network. To connect to another, you need to reset your current Wi-Fi settings and set them up again.

Where can I download the driver for Windows 11?

Official drivers are available on the Samsung website in the support section. Select your model. M2070 Series and download the package for your OS. For Windows 11 The driver from is suitable Windows 10 (compatibility mode is not required).