It is hard to imagine a modern office or home workplace without wireless printing. Wireless printing It eliminates unnecessary cables and allows you to print documents directly from your smartphone or tablet. However, initial setup of the device often presents difficulties for non-technical users.
In this article, we will take a detailed look at all the available methods for integrating a printing device. Samsung into your home network. You will learn about the methods automatic tuning, manual parameter entry, and the use of specialized software. This will allow you to forget about cables and enjoy the convenience of technology.
Before starting the process, make sure your router is turned on and distributing internet, and that the printer is in a strong signal reception area. Stable connection — the key to successful driver installation and fast printing of documents of any size. Let's take a closer look at the preparatory stage.
Equipment preparation and compatibility testing
The first step is to physically check the devices. Make sure your printer Samsung equipped with a module Wi-FiThis is usually indicated by a corresponding button on the control panel or an antenna on the case. If there is no wireless module, you will need to purchase an additional adapter or use a USB cable, although this article focuses on wireless connection.
You also need to know the settings of your wireless network. You will need the network name (SSID) and its password. Without this information, automatic or manual configuration will be impossible. Write it down or keep it handy so you don't have to search through the router documentation during setup.
⚠️ Attention: Make sure the printer and computer or smartphone are on the same subnet. If you have "Guest Wi-Fi" configured, the printer connected to it may not be visible to primary devices due to client isolation.
Check the distance between the router and the printer. For initial setup, it's best to move the printer closer to the access point. Signal The printer must be stable to avoid errors during the transfer of installation files. After successful configuration, the printer can be moved to any convenient location within network range.
WPS method: the fastest way to connect
Technology WPS (Wi-Fi Protected Setup) Allows you to connect devices to the network without manually entering a password. This is the simplest method if your router supports this feature. Most modern routers have a physical WPS button or a software button in the web interface.
To begin, press the WPS button on your router. The security indicator should start blinking, indicating it's searching for devices. Then, within two minutes, press the button WPS on the printer control panel SamsungIf there is no separate button, press and hold the wireless network button.
- 📶 Press the WPS button on the router.
- 🖨️ Activate WPS mode on the printer within 2 minutes.
- ⏳ Wait until the Wi-Fi indicator on the printer lights up solid.
- ✅ Check the list of connected devices in the router.
The encryption key exchange process takes about a minute. During this time security protocol Automatically transmits the network password to the printer. Once successfully connected, the wireless network indicator will stop blinking and remain solid. This means the device is ready for use.
☑️ Checking the WPS connection
It is worth noting that the WPS method does not always work with hidden networks or if the router has filtering enabled. MAC addressesIn such cases, you will have to resort to manual configuration through the device or computer menu.
Setting up via the printer control panel
If the one-button method doesn't work, you can use the device's built-in menu. On models Samsung With an LCD display, navigation is intuitive. You need to find the section responsible for network settings. It's usually called Network, Wireless or has an antenna icon.
Go to the menu and select Wireless LANThe system will offer a list of available networks. Find your router's name in the list and click "OK" or "Select." If the network is hidden, choose the option to enter the name manually.
Next, you'll be asked to enter your password. Use the navigation buttons or touchscreen to enter characters. Be careful with case, as the password is case-sensitive. registerAfter entering the information, confirm the action. The printer will attempt to obtain an IP address from the router's DHCP server.
| Menu item | Function Description | Typical value |
|---|---|---|
| Network Status | Displaying the current state | Connected / Disconnected |
| IP Address | The device's network address | 192.168.0.XX |
| SSID | Wireless network name | MyHome_WiFi |
| Signal Strength | Signal level | Excellent / Good / Weak |
After a successful connection, it's recommended to print a network configuration report to record the assigned IP address. This will help you install drivers on your computer if the automatic search fails. Static IP can be set later via the web interface if needed for a corporate environment.
What to do if the printer does not see the network?
Make sure your router operates in the 2.4 GHz band. Many older Samsung printer models do not support the 5 GHz band. Switch your router to compatibility mode or create a guest network on the 2.4 GHz band.
Using the installation software on your computer
The most reliable way to ensure all necessary components are installed is to use the official disc or download the drivers from the manufacturer's website. Software Samsung Printer Setup will automatically find the device on the network and offer to complete the configuration.
Run the installer and select the connection type Wireless networkThe program will ask you to select a setup method. Select "Use a USB cable temporarily" or "Configure via Wi-Fi Direct" if a direct connection is not possible. It is often necessary to temporarily connect the printer to the PC via a cable to transfer Wi-Fi settings.
During installation, the program will scan your computer's list of available networks and transfer it to the printer. All you need to do is select your network and confirm the password. Once the data has been transferred, you can disconnect the cable. Drivers will be installed automatically and the system will detect the new device.
⚠️ Attention: Your antivirus or Windows Firewall may be blocking the installer. If the program can't find the printer, try temporarily disabling third-party security software.
For corporate users, it is important to configure printing protocol (usually TCP/IP). In the printer properties in Windows, you can add a port by specifying the IP address you found earlier. This ensures a stable print queue even if automatic network detection isn't working correctly.
Connecting mobile devices via Samsung Mobile Print
Samsung has developed an application for printing from smartphones and tablets. Samsung Mobile PrintIt is available for platforms Android And iOSThis allows you to print photos, documents, and web pages directly from your mobile device without using a computer.
Install the app from the Google Play Store or App Store. Make sure your mobile device is connected to the same Wi-Fi network as the printer. The app will automatically search for available printers on your local network.
- 📱 Download the Samsung Mobile Print app.
- 🔗 Connect your phone to the printer's Wi-Fi network.
- 🖼️ Select the file to print in the app.
- ⚙️ Adjust the parameters (size, color) and click "Print".
The app's functionality allows you not only to print, but also to scan documents directly to your phone's gallery, if your MFP supports this feature. Mobile printing significantly speeds up work with documents on the go or at home.
Wi-Fi Direct mode: printing without a router
A unique feature of many models Samsung is Wi-Fi DirectThis mode allows you to connect your computer or smartphone directly to the printer, bypassing your home router. This is especially useful if your router is down or you're in a location where using the main network is prohibited.
To activate, press the Wi-Fi Direct button on the printer's control panel or select it from the menu. The device will create its own wireless network. The network name and password for connection will be displayed on the printer's screen or in the configuration report.
Connect to this network from your device as if it were a regular access point. Once connected, you can print documents. Data transfer speeds in this mode may be lower than through a router, but for small documents this isn't a problem. Direct connection ensures confidentiality because the data does not pass through an external network.
Diagnostics and troubleshooting
Even with proper setup, problems may occur. If the printer Samsung If your printer displays as "Offline" or isn't responding, check the IP address. It may have changed if your router hasn't reserved an address for the printer's MAC address. Dynamic IP sometimes changes after rebooting the router.
Try rebooting all devices one after the other: turn off the printer, router, and computer. Turn on the router, wait for it to fully boot up, then turn on the printer. This sequence helps the devices establish a handshake and obtain addresses correctly.
If the problem persists, check your firewall settings. Port 9100 must be open for incoming connections so that the computer can send data to the printer. Also, make sure that the computer has the latest protocols prints.
⚠️ Attention: Menu interfaces and item names may vary slightly depending on the printer model and firmware version. Always consult the official documentation for your specific printer series.
In complex cases, resetting the printer's network settings to factory defaults may help. This is usually done through the menu. Network -> Reset NetworkAfter this, you'll have to go through the connection procedure again, but this often resolves issues with frozen configurations.
Why won't my printer connect to the 5GHz network?
Most Samsung printers only support the 802.11 b/g/n standard, which operates in the 2.4 GHz band. They do not support the 5 GHz band (802.11 ac/ax standard). You will need to enable 2.4 GHz broadcasting on your router.
How to find out the IP address of a printer?
Press the menu button on the printer, go to "Network" or "Report." Select "Network Configuration Report." The printed report will show the current IP address in the IPv4 Address line.
Is it possible to connect a printer to a hidden network?
Yes, but only through manual settings in the printer menu or via a temporary USB connection