Modern printing demands mobility, and being tied to wires is becoming a thing of the past. HP DeskJet 2720 Connecting to a wireless network opens the possibility of instantly printing documents and photos from a smartphone, tablet, or laptop without unnecessary cables. This process may seem complicated at first, but with the right approach, it only takes a few minutes.
The key is to follow the correct sequence of steps, which we'll cover in detail in this guide. You don't need to be a networking expert to set it up. wireless connectionSimply follow the steps below and use the manufacturer's official tools.
It's important to understand that for successful setup, the router must be working correctly, and the printer itself must be within range of a strong signal. If you just unpacked the device, make sure the cartridges are installed and the protective tape is removed. Only then can you proceed. network setup.
Preparing equipment and checking the network
Before pairing devices, make sure your infrastructure is ready. Your Wi-Fi router must be turned on and broadcasting the network to which your other devices are connected. Make sure you know the network password, as you'll need it to enter it into the printer's memory.
Myself MNFP HP DeskJet 2720 The printer must be put into a state ready for setup. If the device is new, it often automatically enters setup mode when first turned on. However, if the printer has been previously used or moved, a manual reset of the network settings may be necessary.
- 📶 Make sure your router operates at 2.4 GHz, as many budget printer models do not support 5 GHz.
- 🔌 Check that the printer is connected to a power source and the power indicator is on.
- 📱 Charge the smartphone or tablet you will be using to perform the setup.
⚠️ Important: Make sure your mobile data (3G/4G/5G) is disabled on your mobile device during setup. This will prevent conflicts when the phone tries to use the cellular network instead of the printer's local Wi-Fi.
The print management interface is constantly being updated, and app features may change. Always check the latest operating system requirements in the official app store.
Reset network settings and activate setup mode
If the printer has already been connected to another network or is not responding to discovery attempts, you will need to reset it. This will return the network module to its original state. HP DeskJet 2720 The procedure is simple and does not require disassembling the case.
Press and hold the button at the same time Wireless communication (antenna icon) and a button Cancel (cross icon) for 3-5 seconds. The power button will flash, indicating the network module is rebooting. After this, the wireless indicator should start flashing blue.
A flashing blue light means the printer is in setup mode and is broadcasting its own signal. Wi-Fi DirectNow it is visible to external devices and ready to receive your home network parameters.
Sometimes automatic search may fail the first time due to temporary glitches in the phone's drivers. In this situation, simply turning Bluetooth off and on on your smartphone can help.
Using the HP Smart app to set up
The most reliable and functional way to connect HP DeskJet 2720 - using the official application HP SmartIt's available for iOS, Android, Windows, and macOS. This method is preferred, as the app will not only configure the network but also install the necessary drivers.
Download the app from the App Store or Google Play, launch it, and tap "Add Printer" or the plus sign. The app will automatically search for devices. When your printer's image appears on the screen, tap it.
☑️ Setup steps via HP Smart
The app will ask you to select the Wi-Fi network to connect the printer to. It usually selects your smartphone's current network automatically. You'll only need to enter the router password. During the setup process, your phone may temporarily switch to the printer's network—this is normal.
| Action | Indicator on the printer | Status |
|---|---|---|
| Setup mode | Flashing blue | Ready to connect |
| Connecting to a router | Flashing slowly | Data exchange |
| Successful connection | It's blue | The network is active |
| Connection error | Flashing amber | Repetition required |
⚠️ Important: When installing the HP Smart app on Android, be sure to grant location and Bluetooth permissions. Without these permissions, the app will not be able to detect the printer on the local network, even if Wi-Fi is enabled.
Alternative method: WPS connection
If your router has a physical button WPS, you can connect HP DeskJet 2720 Without entering a password. This method is convenient if you don't remember a complex security key or are afraid of making a mistake when entering it.
Press and hold the WPS button on the router for 3 seconds until the WPS indicator starts blinking. Then, within 2 minutes, press and hold the wireless button on the printer (the antenna icon) until the power indicator starts blinking.
The printer and router will automatically exchange encryption keys. This process takes about 2 minutes. If the connection is successful, the Wi-Fi indicator on the printer will stop blinking and turn solid blue.
What to do if WPS doesn't work?
WPS may not work if this feature is disabled in your router's security settings or if the signal is too weak. Some ISPs also block WPS on their devices. In this case, use the HP Smart app.
It's worth noting that the WPS method is less secure in terms of network protection, although this is rarely a critical issue for a home network. For office use, manual configuration via the app is recommended.
Setting up printing from a computer (Windows and macOS)
Once the printer is successfully connected to Wi-Fi, you need to add it to your computer's operating system. In modern versions In Windows 10 and 11, this process often happens automatically if the computer is on the same network.
Go to Settings → Devices → Printers & Scanners. Click Add a printer or scanner. The system will find HP DeskJet 2720 Over the network. If the system prompts you to install drivers, agree.
For macOS users, the path is: "System Preferences" → "Printers & Scanners" → "Add Printer." Select your printer from the list. macOS typically uses AirPrint technology, which allows you to print without installing additional drivers.
- 💻 Make sure your computer and printer are connected to the same Wi-Fi network.
- 🔄 If the printer is not found, try restarting your router and computer.
- 🛡️ Check if your firewall is blocking the connection to your network printer.
In corporate networks with strict Wi-Fi segmentation, direct device-to-device connections may be prohibited by security policies. In this case, please contact your system administrator.
Printing from a smartphone: Android and iOS
Mobile printing is one of the main advantages of wireless connectivity. On devices iOS (iPhone, iPad) uses built-in AirPrint technology. Simply open a document or photo, tap Share → Print, and select HP DeskJet 2720.
For Android The situation is a bit more complex. In addition to the HP Smart app, you can use the "Print by Google" service. Go to your phone's settings, find the "Connections" or "Advanced Features" section, select "Print," and activate the HP Print Service Plugin.
Once the plugin is activated, the printer will be available in all applications that support printing. You'll be able to print directly from browsers, office suites, and the gallery, without opening third-party applications.
⚠️ Important: For AirPrint and Google Print to work, your smartphone and printer must be on the same subnet. If you have a "Guest Network" configured on your router, connect your phone to it if your printer is also on it, or make sure Wi-Fi client isolation is disabled.
You can adjust print quality from your phone directly in the preview menu. The default setting is often "Economy," which can be easily changed to "Best" for photos.
Solving common connection problems
Even if you follow all the instructions, problems may still occur. Most often, the problem lies in the frequency range. Printer HP DeskJet 2720 Only works in the 2.4 GHz band. If your router combines 2.4 and 5 GHz into one network (Smart Connect), the printer may be "lost."
Try temporarily separating the networks in your router settings by giving them different names (for example, Home_2.4 and Home_5) and connect the printer to network 2.4. Also, make sure MAC address filtering is not enabled on your router.
If the Wi-Fi indicator is blinking but the connection isn't established, try moving the printer closer to the router. Metal refrigerators or microwave ovens can cause significant signal interference.
How to find out the IP address of a printer?
Press the "Information" button (the letter "i") on the printer's control panel. It will print a report showing the IP address. This is needed for advanced configuration via the web interface.
In rare cases, updating the printer's firmware via a USB cable can help, as older versions of the software may perform poorly with new router encryption standards.
Frequently Asked Questions (FAQ)
Can the HP DeskJet 2720 be connected to 5G Wi-Fi?
No, model HP DeskJet 2720 The device is equipped with a module that operates only in the 2.4 GHz frequency range. To connect, make sure your router broadcasts a 2.4 GHz network and that your phone is also connected to it during setup.
The printer is not found in the search, what should I do?
Make sure Bluetooth and Location Services are enabled on your phone. Check if the blue light on the printer is blinking. If it's solid, reset the network (press the Wireless + Cancel buttons). Also, try rebooting your router.
Do I need a USB cable to set up Wi-Fi?
For the model HP DeskJet 2720 A USB cable is not required if you use the HP Smart app setup method with Bluetooth passcode transfer. However, you may need a cable if automatic setup repeatedly fails.
How to print a test page after connection?
Open the HP Smart app, select your printer, and find "Printer Settings" or "Tools." There you'll find the option to "Print Quality Report" or "Test Page." You can also press and hold the "Copy" button on the printer itself.