Switching to a new router or changing the home network password often causes printing equipment to stop working. Model Canon PIXMA G3010Despite its reliability, it requires proper reconfiguration of the wireless module to restore communication with a computer or smartphone. Reconnecting doesn't require extensive networking knowledge, but it does require precise adherence to a specific sequence of steps.
In this article, we'll cover all available methods for synchronizing your device with a router. You'll learn about the nuances of using the WPS button, manually entering parameters via a PC, and the specifics of a direct connection. Proper setup will ensure reliable document printing and scanning without the need for unnecessary cables.
Before proceeding with the software, you need to ensure the hardware is physically ready. Make sure the router is turned on and sending a signal, and the printer has ink and is within range. Any power interruptions during setup can disrupt the network adapter's configuration.
⚠️ Important: Before beginning setup, make sure your router is broadcasting in the 2.4 GHz band. Many printer models, including the G series, do not support the 5 GHz band for initial pairing.
Preparing equipment and resetting old settings
The first step is to prepare the printer's network module to search for a new access point. If the device was previously connected to a different router, it may automatically attempt to connect to the old network, listening for new signals. To avoid conflicts, we recommend resetting the network settings.
On the control panel Canon G3010 Find the button with a smartphone or a wireless network icon. Press and hold it until the power indicator flashes once. Then, release the button and immediately press the Black or Color button. This activates network search mode.
It's important to monitor the wireless indicator. Normally, it should start blinking, indicating the adapter is waiting for a connection command. If the indicator light remains steady, the device is still connected to the previous router, and the reset procedure needs to be repeated.
- 📶 Make sure the printer is located no more than 3-5 meters from the router during setup.
- 🔌 Check that the power cable is securely inserted and there is no risk of accidental power outage.
- 📱 Prepare the device (PC or phone) from which you will manage the settings.
⚠️ Please note: Driver and mobile app interfaces may be updated by the developer. The button layout in the software may differ slightly from that described in the instructions.
☑️ Ready to connect
Using WPS technology for fast synchronization
The easiest way to connect Canon printer The easiest way to connect to a new network is to use WPS (Wi-Fi Protected Setup). This method allows you to transfer network information automatically, without having to manually enter a complex password on a small screen or through a computer.
First, locate the WPS button on your router. It may be a physical button or a software button in the router's interface. Press and hold it for a few seconds until the WPS indicator on the router starts blinking. You'll then need to activate WPS mode on the printer within two minutes.
Press and hold the wireless button on the panel Canon G3010 Press the power button until the power light flashes, then release. Immediately press the black-and-white or color copy button. The wireless network light on the printer should start flashing, waiting for a connection. Once the router and printer have found each other, the Wi-Fi light on the MFP will turn solid.
A successful connection is confirmed by a steady light on the wireless network. If the light continues to flash or goes out, the connection has failed. In this case, check whether your router supports the WPS standard, as some modern security models may have this feature disabled by default.
Setup via a computer using a USB cable
If automatic methods don't work, the most reliable option is a wired setup. For this, you'll need an installation disc or a driver downloaded from the official website for your model. G3010This method allows you to transfer Wi-Fi settings directly from your computer to the printer.
Run the driver installer on a computer that's already connected to the new Wi-Fi network. Follow the on-screen instructions. When prompted to select a connection method, select "Wireless LAN." The installer will ask you to temporarily connect the computer and printer with a USB cable.
Connect the USB cable to the printer port (on the back, under the cover) and to a free USB port on your computer.The program will automatically detect the device and transfer the settings of the current Wi-Fi network to which the PC is connected. After the data transfer, the installer will prompt you to disconnect the USB cable. The printer will reboot the network module and attempt to connect to the network automatically.
| Setup stage | User action | Indication on the printer |
|---|---|---|
| Starting the installation | Select "Wireless Connection" | The power indicator is on |
| USB connection | Connecting the cable | The alarm indicator may flash. |
| Data transfer | Waiting for the process to complete | The Wi-Fi indicator is blinking |
| Conclusion | Disconnecting the USB cable | The Wi-Fi indicator is on steadily. |
What should I do if my computer doesn't see my printer via USB?
Make sure the cable is working properly and supports data transfer, not just charging. Try using a different USB port, preferably located directly on the motherboard (at the back of the system unit), avoiding USB hubs.
Direct Connection without a router
The Direct Connection feature allows you to connect your mobile device or laptop directly to the printer, bypassing your home Wi-Fi network. This is especially useful if your router is temporarily unavailable or you're in a location where the main network is prohibited.
To activate this mode, press the wireless button on the panel Canon G3010 Repeatedly until the direct connection icon appears on the screen (or in the display). The printer will create its own access point with a name like "Canon_ij_G3010_series."
On your smartphone or tablet, open the list of available Wi-Fi networks and select the printer's network. The connection password is usually located on a sticker on the device or printed on a test page, which can be accessed with a key combination. Once connected, you can print documents through the app. Canon PRINT Inkjet/SELPHY.
- 📲 Use this method to quickly print photos from your guests' phones.
- 🔒 Please note that in Direct mode, the internet may not be available on the connected device.
- ⚙️ To return to the regular network, you will need to reconfigure the connection through the device's Wi-Fi menu.
Installing and updating drivers on a new network
After successfully connecting the printer to the router, the operating system may not immediately recognize the device if the system has outdated drivers from the previous network. Ensure the system has the latest software installed.
Go to Control Panel -> Devices and Printers (for Windows) or System Preferences (for macOS). If you see an old copy there Canon G3010 If you have a printer with the "Offline" or "Unavailable" status, delete it. Then click "Add Printer" and let the system find the new network device.
It is important to use full driver package, which includes not only basic printing but also utilities for ink monitoring and scanning. Download the software only from the manufacturer's official website, choosing your operating system.
⚠️ Note: When upgrading your operating system (for example, from Windows 10 to 11), old drivers may no longer work correctly. Always check the compatibility of your driver version with your current OS version.
Troubleshooting and Common Mistakes
Even if you follow all the instructions, technical difficulties may arise. Often, the problem lies in the router's security settings, which block new devices. Check if MAC address filtering is enabled.
If the printer sees the network but won't connect, try temporarily disabling MAC filtering on your router. Also, make sure your network encryption is set to WPA2-PSK (AES), as older encryption standards may not be supported by the printer's modern Wi-Fi module.
Another common error is entering the password incorrectly. When entering it manually on a PC, pay close attention to the case of the letters. The characters "I" (uppercase i) and "l" (lowercase L) are often confused, resulting in an authorization error.
Why is my printer not in the list of available devices?
Make sure your computer and printer are on the same subnet. Sometimes antivirus software or Windows Firewall can block network printer detection. Try temporarily disabling the firewall to check.
Is it possible to connect Canon G3010 to a hidden network (SSID Hidden)?
Yes, but only through manual setup from a computer using a USB cable. Automatic discovery and WPS don't work with hidden networks, as the printer doesn't see the network name to connect to.
How do I find my printer's IP address on a new network?
Press the wireless button on the printer once, then press the information button (the i icon or the letter on the paper). The device will print a network connection report, which will show the current IP address.