Owners of Apple equipment often face the need to integrate peripheral equipment into a single ecosystem, and wireless connection plays a key role here. Model Epson L355 It remains a popular choice thanks to its economical continuous ink supply system, but setting it up on macOS can require some attention to detail. Proper network configuration will allow you to print documents and photos from any device in the home without the hassle of unnecessary wires.
The process of establishing a connection between a printer and a computer relies on the correct operation of network protocols and drivers. Unlike a wired connection, Wi-Fi module The device requires precise entry of your home network security settings. If you plan to use MacBook or iMac To manage printing, it is important to understand that the macOS operating system has its own peculiarities of interaction with external devices.
In this article, we'll walk you through every setup step: from initial hardware preparation to resolving complex IP address conflicts. You'll learn how to use built-in utilities. Epson Software Updater and standard Apple tools for seamless operation. A smart approach to setup will save you from having to re-search for the device in the list of available printers each time.
Preparing equipment and checking network parameters
Before you begin software configuration, you must ensure that the physical condition of the devices meets the requirements for network operation. Make sure that your Epson L355 turned on and the indicators on the control panel are lit with a steady light, not flashing red. The computer is running macOS must be connected to the same wireless network to which you plan to connect the printer.
⚠️ Important: Make sure your router is broadcasting at 2.4 GHz, as many older printer models, including the L355, may not see 5 GHz networks during initial setup.
It's important to check the signal strength where the MFP is installed. A weak signal can lead to interruptions during driver installation. If the router is located far away, temporarily relocate it. printer closer to the signal source to perform the pairing procedure.
☑️ Check before setup
It's also a good idea to know your router's IP address in advance, as in some cases manual TCP/IP configuration may be required. For users Mac This is especially important if the automatic device search doesn't produce any results. Write down your Wi-Fi network password to avoid errors when entering special characters.
Resetting the Epson L355 printer's network settings
If the device was previously used with another router or computer, it may have retained old configurations. For a clean installation, it is recommended to perform reset network settings Reset to factory defaults. This action will not affect print settings or ink counters, but will clear the list of known Wi-Fi networks.
To perform a reset on the control panel Epson L355 Find the button with the network icon (usually labeled "Network" or with an antenna icon). Press and hold this button for a few seconds until the indicators start flashing simultaneously. It's best to check the user manual for the exact button combination, as firmware versions may vary.
What happens when you reset your network?
When resetting network settings, the printer loses all saved Wi-Fi passwords and static IP addresses. The device returns to standby mode, ideal for reconfiguring from a Mac. Page count data is retained.
After the reset, the network indicators should flash, indicating that it is ready to search for a new connection. Now printer is in a mode where it can be discovered by new devices. This is a critical step if previous connection attempts have failed.
Installing drivers and software on macOS
The macOS operating system often has built-in drivers for popular models, but for full functionality Epson L355 It's better to use official software. Go to the official Epson support website and find the download page for your model. Select the operating system version that matches your model. MacBook or iMac.
Download the "Drivers and Utilities Combo Package" which contains all the necessary components, including Epson Software UpdaterThis tool will automatically detect your device model and offer the latest driver versions. Installation is standard, but requires entering the system administrator password.
| Software component | Purpose | Necessity |
|---|---|---|
| Printer Driver | Basic Print Driver | Necessarily |
| Scanner Driver | Scanner driver (TWAIN/ICA) | For scanning |
| EPSON Status Monitor | Ink level monitoring | Recommended |
| Wireless Setup Tool | Wi-Fi Configuration Utility | For initial setup |
During the installation process, the macOS security system may request permission to load kernel elements or feature extensions. You must agree to these actions, otherwise driver The software will not be able to interact correctly with the hardware. After installation is complete, it is recommended to restart the computer.
Setting up a wireless connection via WPS
The easiest way to connect Epson L355 to the network is the use of technology WPS (Wi-Fi Protected Setup). This method allows you to automatically transfer the network password, without manual entry. Check if your router supports this feature—there's usually a dedicated button on the router or in the web interface.
Press and hold the WPS button on your router for 2-3 seconds. Immediately afterward, within two minutes, press and hold the network button on the control panel. printer until the indicators begin to flash rapidly. The device will automatically attempt to find the router and establish a secure connection.
⚠️ Note: The WPS function must be enabled in your router settings. On some modern router models, this function is disabled by default for security reasons.
A successful connection will be confirmed by a steady green network indicator on the printer. If the indicator continues to blink or is red, the connection has not been established. In this case, you should try manual configuration or use a temporary USB connection to transfer network settings.
Adding a printer to macOS via AirPrint
After Epson L355 connected to Wi-Fi, you need to add it to the list of devices on your MacOpen System Preferences and go to the Printers & Scanners section. Click the Add New Device button (the plus sign in the lower left corner).
Your printer model should appear in the window that opens. macOS often automatically detects the device via the protocol. AirPrint, which allows you to print without installing additional drivers. However, for advanced features, it's best to select the specific model in the "Use" field. Epson L355, not "Secure AirPrint".
If your printer doesn't appear in the list, go to the "IP" tab and enter the device's address manually. You can find the address by printing a network status report on the printer itself (usually with a key combination). In the protocol field, select IPP or HP Jetdirect (Socket) if IPP does not work.
Diagnosing and resolving connection problems
Even with the correct setup, situations may arise when Mac The printer stops being detected, or print jobs get stuck in the queue. The first step should always be checking the printer's status in the system. Open Activity Monitor or the Epson utility to ensure the device is online.
A common issue is that the printer's IP address changes after a reboot. To avoid this, it's recommended to lock the IP address in the router settings or configure a static IP on the device itself. Epson L355 This can be done via the web interface by entering the current IP address in the browser.
⚠️ Note: Router interfaces and macOS versions are updated regularly. The location of security and protocol settings may differ from those described, so please consult your router manufacturer's documentation.
If problems persist, try removing the printer from the macOS device list and adding it again. Clearing the print cache can sometimes help. Open Terminal and enter the command to stop the print service, then start it again.
sudo launchctl stop org.cups.cupsd
sudo launchctl start org.cups.cupsd
Running these commands will restart the print service without restarting your computer. Afterward, try sending a test page. If that doesn't help, check your macOS firewall settings—it may be blocking the connection to the network printer.
Using Epson Smart Panel for Mobile Management
For owners of mobile devices based on iOS and Android, Epson offers an application Epson Smart PanelIt allows you to scan documents and send them to print directly from your smartphone, using the same Wi-Fi network as MacThis is a convenient addition to the main system.
The app automatically finds your printer on the network and offers basic settings. You can also check the ink levels in the Smart Panel. CISS and run nozzle cleaning if print quality has deteriorated. This eliminates the need to go to the computer every time.
The "Easy Photo Print" feature within the app allows you to quickly edit and print photos. Wi-Fi data transfer quality is high enough for 10x15 photos. Cloud service support allows you to print documents stored in Dropbox or Google Drive.
Is it possible to print without a router?
Yes, Wi-Fi Direct technology allows you to connect your smartphone or laptop directly to your printer without a router. However, using a Mac over a shared network requires a router.
Optimizing print quality and service
After successful setup, it's time to focus on calibration and maintenance. In the driver Epson L355 For macOS, there are tabs for setting paper type and print quality. For documents, select "Black and White" mode and "Plain" paper type to conserve resources. print head.
Use your printer regularly, even if you only print one page a week. This will prevent the ink from drying out in the nozzles. The self-cleaning system is effective, but it uses a lot of ink, so preventative printing is more important.
Keep up with macOS updates. Sometimes new versions of the operating system contain fixes for printing protocols, which can improve the stability of older printer models. Compatibility — a key factor in the long service life of equipment.
Why can't my Mac see my Epson L355 on the network?
Most often, the problem is that the devices are on different subnets (for example, a guest Wi-Fi network) or client isolation is enabled on the router. Also, check whether the macOS firewall is blocking the ports used by the printing protocol.
How to find the IP address of the Epson L355 printer?
Press and hold the information button (the "i" icon) on the printer's control panel for 7-10 seconds. The printer will print a network status report, which will display the current IP address in the format 192.168.xx.
Can I use the Epson L355 with Time Machine?
No, this MFP model does not support connecting external hard drives for network storage. Time Machine requires a separate NAS or a drive connected to a router that supports the appropriate protocols.
What should I do if the red ink light is on?
If the indicator light is constantly on, the ink is low. If it's blinking, the ink is out or the system isn't detecting the chips on the tanks. Make sure the tanks are installed securely and the fluid level is above the minimum mark.