Modern laser printers such as HP Laser 107w, are no longer bulky devices tethered exclusively to a computer in the corner of the office. Today, users expect to instantly print documents and photos directly from their smartphone, from anywhere in their home or office. Wireless technology Wi-Fi Direct and cloud services make it possible to implement this scenario without unnecessary wires and complex router setup.
Owners of this model often face the need to quickly organize printing from a mobile device, whether it be Android or iOSThe setup process may seem confusing due to the lack of a full-screen display on the device itself, but knowing the correct steps reduces the entire process to just a few minutes. The key is to activate the pairing mode on the printer in the correct sequence before the phone searches for it.
In this guide, we'll cover every step of the connection process, from initial wireless module activation to fine-tuning security settings. You'll learn how to avoid common errors that can cause your phone to not detect your printer, and how to ensure a stable connection for online use.
Equipment preparation and requirements verification
Before proceeding with software configuration, you need to make sure that the hardware is physically ready. Make sure that HP Laser 107w The unit is plugged in and paper is loaded in the tray. The control panel lights should be solid, indicating the unit is ready for use. If the error light is flashing, first troubleshoot the issue as described in the manual.
The second important aspect is your mobile device. Your smartphone or tablet must support Wi-Fi standards. 802.11 b/g/nFor high-quality operation of the application HP Smart It's recommended to have a current operating system version for printing services or system printing services. Older OS versions may not support new encryption protocols used by the printer by default.
It's also a good idea to prepare your home network access details in advance. You'll need to know the exact network name (SSID) and a password. If your network uses split frequencies into 2.4 GHz and 5 GHz, remember that most budget laser printers, including this model, operate exclusively in the 2.4 GHz and 5 GHz bands. 2.4 GHz.
⚠️ Important: Make sure Client Isolation is not enabled on your router. This feature blocks data exchange between devices within the network, preventing your phone from printing a document even when on the same Wi-Fi network.
For stable operation, it is recommended to place the printer and router no more than 10-15 meters away, within direct line of sight, or with minimal walls. The laser module is sensitive to strong electromagnetic interference, so avoid placing the device close to powerful radiation sources.
Activating wireless mode on the printer
The first step to a successful connection is to put the device itself into connection standby mode. On the panel HP Laser 107w There's a button with an image of an antenna or wireless network. A short press on it starts the search for previously known networks, but for initial setup, we'll need to reset the network settings.
To ensure that you enter setup mode, a combination of steps is often required. Try pressing and holding the wireless button along with the cancel button (the cross) for a few seconds. The wireless indicator should start blinking blue or light blue. This means the printer is broadcasting a signal for discovery.
If the indicator is flashing, it means that Wi-Fi Direct or setup mode is activated. In this state, the printer creates its own access point or becomes visible to HP discovery services. Do not turn off the device until the driver installation process is complete.
In some cases, especially after replacing a router, it's helpful to perform a full reset of your network settings. This will restore the wireless module to its factory settings and resolve any IP address conflicts that may have occurred during previous connection attempts.
Using the HP Smart app to set up
The most reliable and functional way to integrate a printer into your ecosystem is to use the official app. HP SmartIt is available in stores. Google Play And App StoreThe app automatically scans the network for new devices and offers step-by-step setup instructions.
After installing the app, create an HP account or sign in to an existing one. This is required to access advanced features, such as scanning to the cloud and toner level monitoring. Click the "Add Printer" button or the plus sign in the main menu.
The app will request permission to use geolocation and local network. These permissions are critical: without them, the phone's OS (especially Android (versions 10 and above) will disable scanning for Wi-Fi networks. Follow the on-screen instructions, selecting your home network from the list.
During setup, the app will transfer your router passwords directly to the printer. This eliminates the need to manually enter complex passwords through an inconvenient button interface. Wait for the successful connection message, after which the indicator on the printer will stop flashing and turn solid.
Setting up Wi-Fi Direct printing without a router
Situations when the router is unavailable or you are away from home require the use of technology Wi-Fi DirectIn this mode, the printer creates its own wireless network, to which the phone connects directly, bypassing the internet router. This is ideal for printing documents when visiting someone or at the cottage.
To activate this mode, make sure the Wi-Fi Direct indicator is on. If it's off, press the corresponding button on the panel. A name containing the model number will appear in the list of available Wi-Fi networks on the smartphone screen. HP Laser 107w and a unique identifier.
When attempting to connect, the system will ask for a password. By default, it's often listed on a sticker on the back of the device or in the user manual, but it can be changed. Entering the password is usually only required the first time you connect, after which the phone will remember the device.
- 📱 Open Wi-Fi settings on your phone and find the network with the prefix "DIRECT-".
- 🔑 Enter the password (PIN), which can be printed by pressing the information button on the printer (if supported) or found in the documentation.
- 🖨️ Open a document or photo, select Print, and select the detected HP printer.
- ✅ Confirm the task on your phone screen, and the printer will start printing.
It's important to understand that when connecting via Wi-Fi Direct, your phone may temporarily lose internet access if it doesn't support two Wi-Fi connections simultaneously. Modern flagship phones can maintain internet access via mobile data while printing over Wi-Fi.
Alternative methods: AirPrint and Mopria
Device owners Apple can appreciate the built-in technology AirPrintIt doesn't require installing any additional drivers or apps. If your iPhone and printer are on the same Wi-Fi network, simply open a photo or document, tap the "Share" button, and select "Print." The system will automatically detect a compatible device.
Users Android can use the printing service MopriaIn modern OS versions, it's built-in by default. Check the printing settings in the "Connections" or "Advanced Features" section. If the service is disabled, enable it and wait for it to search for devices on the local network.
These methods are simple, but they lack advanced diagnostics. If printing fails, you won't be able to view toner levels or error status through your phone's standard print menu. For more in-depth troubleshooting, it's still best to periodically refer to HP Smart.
Why might AirPrint not see the printer?
AirPrint requires that the phone and printer be on the same subnet. If you have a complex network with guest access or VLANs, multicast discovery packets may be blocked. Also, make sure Bonjour or mDNS is enabled on your router.
Sometimes, AirPrint activation requires a cartridge with a chip installed in the printer. Some compatible cartridges may block network functionality, so using genuine consumables is recommended. HP is often a guarantee of full functionality.
Diagnosing and resolving connection problems
Even if you follow the instructions carefully, technical difficulties may arise. Often, the problem stems from Wi-Fi channel incompatibility. The router may be operating on a channel that the printer doesn't like or doesn't support (for example, channels higher than 11 in some regional settings).
Another common cause is an incorrect date and time on your router or phone, which leads to security certificate conflicts when attempting a secure connection. Check the time synchronization in your device settings.
| Symptom | Possible cause | Solution |
|---|---|---|
| The Wi-Fi indicator is blinking | There is no connection to the router | Check the password and the 2.4 GHz band |
| The phone doesn't see the printer. | Different networks or isolation | Make sure the devices are on the same network |
| Printing freezes | Weak signal or interference | Move the printer closer to the router |
| Driver error | Outdated software | Update the HP Smart app |
If all else fails, try temporarily disabling your antivirus or firewall on your phone, as well as the "Private Wi-Fi Address" feature in your iOS/Android connection settings. This feature masks your phone's MAC address, which can sometimes confuse older printer network protocols.
☑️ Connection diagnostics
Optimization and security tips
After successful setup, remember to change the printer's administrator password if you plan to use it in a public space or office. The device's web interface is accessed via its IP address, which can be found by printing a configuration report.
Update your printer firmware regularly. HP periodically releases updates that improve Wi-Fi stability and patch security vulnerabilities. This can be done through the "Printer Service" tab in the app. HP Smart.
⚠️ Note: Printer app interfaces and menus may be updated. If you don't see the described items, check the official documentation on the manufacturer's website for your specific firmware version.
To save energy, set up automatic sleep mode. HP Laser 107w It can quickly "wake up" via Wi-Fi, but setting sleep timers will extend the life of the fuser and save electricity at night.
Frequently Asked Questions (FAQ)
Can the HP Laser 107w be connected to a 5G Wi-Fi network?
No, this printer model only supports the standard 802.11 b/g/n, which operates in the 2.4 GHz frequency range. If your router broadcasts the same network with a common name for both 2.4 and 5 GHz, try temporarily separating them in the router settings or ensure your phone is connected to the 2.4 GHz band during setup.
What is the maximum range of Wi-Fi Direct?
Under ideal conditions (open space), the range can reach 30-50 meters. However, in an apartment with concrete walls and metal structures, a stable connection is typically maintained at a distance of up to 10 meters. It's best to be in the same room as the device for printing.
Do you need internet access to print via Wi-Fi?
Printing via a local network (router) doesn't require internet access; you only need a working local network between your phone and the printer. Printing via Wi-Fi Direct also doesn't require internet access, as the connection is direct. Internet access is only required for the initial driver installation or firmware updates.
Why is my printer printing slowly over Wi-Fi?
Wi-Fi printing speed depends on the airwaves, the number of connected devices, and the distance from the router. Large files (such as high-resolution photos) may take longer to transfer. Try lowering the print quality or moving your device closer to the router.