Modern office equipment has long ceased to be bulky and tied to a single computer. Wireless connection opens up new horizons for users, allowing them to print documents and photos directly from their smartphone or tablet. Canon PIXMA G3415 is one of the leaders in the affordable inkjet MFP segment, offering excellent functionality and ease of use from mobile devices.
The setup process may seem complicated at first glance, especially for those integrating a printer into a home network for the first time. In fact, the Japanese company's engineers have provided several connection scenarios so that each user can choose the most convenient method. The key condition for successful synchronization is that all devices are located on the same local network.
In this article, we'll cover all available setup methods in detail, from using the quick access button to manually entering settings through the router's screen. You'll learn how to avoid common mistakes and what to do if your phone doesn't detect your printer. Get ready to transform your G3415 into a full-fledged home printing center.
Preparation of equipment and software
Before starting the active setup phase, you need to make sure that all system components are ready for operation. Connection stability This depends directly on proper preparation. Make sure your router is turned on, working properly, and broadcasting a Wi-Fi signal to which your smartphone is already connected.
The printer itself Canon G3415 The device must be unpacked, filled with ink, and plugged into a power source. After powering on, allow the device time to complete its internal calibration processes, which will be indicated by a lit power indicator. If you're using a new device, an initial setup via USB cable may be required to activate the warranty, although this isn't always necessary for Wi-Fi.
⚠️ Important: Make sure your smartphone and printer are connected to the same router frequency band (usually 2.4 GHz). Many modern routers operate in two bands, and older printer models may not be able to see 5 GHz networks.
The next critical step is to install a dedicated app. Canon has developed a utility Canon PRINT Inkjet/SELPHY, which serves as a bridge between your mobile device and printer. Without this software, full control of scanning and printing functions from your phone will be impossible.
☑️ Pre-launch check
Direct connection method via Wi-Fi button
The fastest way to establish a connection is to use the wireless connection button on the device's body. On the front panel Canon G3415 There's a button with a smartphone icon. Clicking it launches the search for available networks or creates an access point.
If you press the button once, the printer will attempt to find previously saved networks. A new setup often requires holding the button until the power light starts flashing, then releasing it. After this, your printer's name, beginning with Canon_ij_ or something similar.
- 📱 Press the Wi-Fi button on the printer and wait until the indicator light flashes.
- 🔍 Find the printer's network in your phone's Wi-Fi settings.
- 🔑 Enter the default password (indicated on the sticker inside the device).
- 🔄 Wait until the Wi-Fi indicator lights up continuously.
This method is advantageous because it doesn't require manually entering the router password, as the connection is established directly or via the standard WPS protocol, if supported by the router. However, it's worth remembering that this connection may temporarily cause your phone to lose internet access if it doesn't support multiple Wi-Fi hotspots.
What should I do if the indicator light is flashing too fast?
If the Wi-Fi indicator is blinking very quickly, it means the printer is in setup mode but can't find a network. Try moving the device closer to the router or rebooting both devices.
Setup via the Canon PRINT Inkjet/SELPHY app
The most functional and recommended method is to use the official app. It automatically scans the network and prompts you to add a new device. After launching Canon PRINT Click on the add printer icon in the top corner of the screen.
The app will request permission to use your local network—this is necessary for device detection. Then follow the on-screen instructions: select your model from the list or let the system detect it automatically. You'll be prompted to enter your Wi-Fi network password, which the app will transmit to the printer.
| Setup stage | User action | Indicator reaction |
|---|---|---|
| Search | Click "Add Printer" | Blinks slowly |
| Data transfer | Entering the Wi-Fi password | Blinks frequently |
| Connection | Waiting for connection | It's on constantly |
| Error | Incorrect password | It's glowing orange |
During the setup process, the application may prompt you to update the printer firmware. Firmware update This is an important step that improves the stability of the wireless module and adds support for new features. Interrupting this process is strongly discouraged, as it may cause a software crash.
Using WPS technology for fast synchronization
If your router supports the technology WPS (Wi-Fi Protected Setup), the connection process can be simplified to a minimum. This method allows you to transfer network security settings to the printer without manually entering a password. The router should have a corresponding button, often marked with two arrows or a lock icon.
To start the process, press and hold the Wi-Fi button on the printer Canon G3415 until the network indicator starts blinking. Then, within two minutes, press the WPS button on your router. The devices will find each other and automatically exchange encryption keys.
- 🔘 Press and hold the Wi-Fi button on the printer.
- 📡 Press the WPS button on the router.
- ⏳ Please wait about 1-2 minutes for the process to complete.
- ✅ The Wi-Fi indicator on the printer should light up steadily.
The advantage of this method is its speed and the elimination of the need to remember a complex network password. However, if the router is far from the printer or the signal is weak, the connection may not be established on the first try. In such cases, it's worth repeating the procedure, moving closer to the signal source.
Solution and connection problems
Even if you follow all the instructions, situations may arise where the phone doesn't see the printer or the connection keeps dropping. One common cause is IP address conflict or incorrect router security settings. Check if your router has MAC address filtering enabled, which could be blocking new devices.
It's also worth paying attention to the network encryption type. Printers of the series G3415 Work best with WPA2-PSK standards. If your router is configured to use legacy WEP or the newer pure WPA3, compatibility issues may arise. In such cases, it is recommended to create a guest network with compatible parameters.
⚠️ Note: Router interfaces and operating system versions are constantly updated. The location of security settings or menu item names may differ from those described. Always consult the documentation for your specific equipment.
If all else fails, perform a full reset of the printer's network settings. To do this, press and hold the Direct Connect button (on your smartphone) until the alarm indicator flashes a certain number of times (usually 19 times for a full reset, but for a network, just hold it until the Wi-Fi blinking pattern changes). This will restore the network settings to factory defaults.
Printing and scanning from mobile devices
Once successfully set up, a wide range of options opens up. You can print photos directly from your gallery, documents from cloud storage, or web pages. Canon PRINT Allows you to choose paper size, media type and print quality, ensuring professional results.
The scanning function is also available wirelessly. Place the document on the scanner glass, launch the app, and press the scan button. You can save the result as a PDF or JPEG and instantly send it via email or instant messaging, without using a computer.
- 🖨️ Printing photos with color correction and borderless.
- 📄 Scan to cloud or device.
- 📎 Copy documents without using a PC.
- 📊 Print graphs and tables from spreadsheets.
Using cloud services such as Google Cloud Print (where still supported) or Apple AirPrint, makes the process even more transparent. For iOS users, simply select "Share" and tap the printer icon, and the system will automatically find the device on the network.
Is it possible to connect Canon G3415 to iPhone without an app?
Yes, Apple devices support AirPrint. If your iPhone and printer are on the same Wi-Fi network, you can print directly from any supported apps (Photos, Safari, Notes) without installing additional software, although the Canon PRINT app offers more customization options.
Why is my printer printing slowly over Wi-Fi?
Wireless printing speed depends on signal quality and channel congestion. If the router is located far away or there are powerful radiators (such as microwave ovens) nearby, data transfer speed will drop. Try changing the Wi-Fi channel in your router settings.
Does G3415 support printing from Android via USB cable?
This is theoretically possible using an OTG cable and third-party apps, but official support and stable operation are guaranteed with a wireless connection. A wired connection from a phone is not the primary use case for this model.