Modern users are accustomed to mobility, and the need to connect a USB cable to a computer every time to print documents or photos seems archaic. Canon PIXMA G3415 Equipped with a built-in wireless module, it allows you to instantly send print jobs directly from your smartphone or tablet. This is especially useful when you need to quickly print a ticket, contract, or photo without transferring the files to a desktop computer.
The initial setup process may seem complicated at first glance, as it requires syncing two devices on the same network. However, by following a clear sequence of steps, you can activate wireless connection in just a few minutes. In this article, we'll cover all the configuration details, from preparing the equipment to troubleshooting common mistakes newbies make.
It's worth noting that the printer's wireless stability directly depends on the signal quality of your router. Before you begin, make sure the router is turned on and providing internet access, and your phone is within a strong signal range. It's also important to download the official app in advance, as it's the primary device management tool.
Preparatory stage and network requirements
Before proceeding with software setup, you need to physically prepare the equipment. Make sure the printer has ink and paper in the tray. The device should be turned on, and there should be no warning lights on the control panel indicating a cartridge shortage or jam.
The frequency of the Wi-Fi network is critically important. Model G3415, like most printers of this class, only supports the standard 2.4 GHzIf your router only broadcasts a signal on the 5 GHz frequency, the printer simply won't see the network. Modern dual-band routers often combine these networks under a single name, but to ensure compatibility, it's best to temporarily separate them or ensure your phone is connected to the 2.4 GHz band.
- 📱 Make sure your smartphone is connected to the same Wi-Fi network you plan to connect the printer to.
- 🔋 Check your phone's battery level as the setup process may take time.
- 📶 Find out the password for your wireless network; you will need it to enter it in the app.
- 💿 Make sure your printer is equipped with original or compatible cartridges.
⚠️ Important: If AP Isolation is enabled on your router, devices on the same network will not be able to see each other. To enable printing from your phone, you must disable this feature in your router settings.
It's also worth considering that corporate networks with web-based authentication or complex security certificates may not be suitable for direct printer connection without the help of a system administrator. In home settings, such issues typically don't arise if the standard WPA2 encryption protocol is used.
Installing and preparing the Canon PRINT app
The centerpiece of Canon's mobile ecosystem is the app. Canon PRINT Inkjet/SELPHYThis software not only allows you to print but also scan documents and monitor ink levels in your CISS. It can be downloaded for free from the official app stores: the App Store for iOS or Google Play for Android.
After installing the app, don't rush to launch it right away. First, you need to put the printer itself into connection standby mode. To do this, go to the control panel. Canon G3415 Find the button with the image of a smartphone (Direct). Press and hold it for a few seconds until the power indicator starts flashing, and then the wireless indicator lights up.
In some cases, you may need to reset the old network settings if the printer was previously used on a different network. To do this, press and hold the Stop button (the triangle in a circle) until the alarm indicator flashes 15 times, then release the button. The device will reboot the network module.
Now you can open the app on your smartphone. When you first launch it, it will ask for permission to access your geolocation and local network. Permits are requiredWithout geolocation access, Android devices often cannot find Wi-Fi networks for setup, and access to the local network is needed to detect the printer.
Step-by-step setup via Direct mode (without a router)
One of the easiest ways to establish a connection is to use the mode DirectIn this case, the printer creates its own wireless access point, which your phone connects to. This is ideal if your router is far away or you want to print from your laptop or phone while away from home.
To activate this mode, press the "Direct" button on the printer's control panel. You'll see the network name on the device's screen or on the printed network settings report (which can be obtained by pressing a key combination), for example, Canon_ij_G3415, and a password. This password may also be located on a sticker under the device's cover.
☑️ Direct Mode Connection Algorithm
After connecting your phone to this network, open the application Canon PRINTIt will automatically detect the printer. If it doesn't, click the add printer button (usually the "+" icon in the corner) and select "Search for a device." The app will prompt you to register the device, after which you can print files.
It is important to understand that in the mode Direct Your phone may lose internet access because it will switch to the printer's Wi-Fi. Printing will still work, but downloading files from the cloud may be interrupted. Therefore, for continuous operation, it's best to use a router connection.
Configuration via a wireless router (Infrastructure mode)
For full functionality, when the Internet on the phone remains active, and the printer is visible to all devices in the house, you need to connect Canon G3415 to your main router. In the app Canon PRINT Select "Add Printer" and follow the on-screen instructions. The app will automatically prompt you to transfer the Wi-Fi settings from your phone to the printer.
During setup, the app may prompt you to press the "Wi-Fi" button on the printer. The wireless network indicator should start blinking, indicating network search mode. A list of available networks will appear on your smartphone screen—select your home network and enter the password.
A successful connection is confirmed by the Wi-Fi indicator on the MFP casing lighting up (not blinking, but staying lit). If the indicator continues to blink, the connection has not been established. In this case, check the correct password and the distance to the router.
| Wi-Fi indicator | Direct Connection Indicator | Connection status | Action |
|---|---|---|---|
| It's on fire | It doesn't burn. | Connected to the router | You can print via the Internet |
| It doesn't burn. | It's on fire | Direct mode | Print directly from your phone |
| Flashing | It doesn't burn. | Searching for network / Error | Check your router settings |
| Flashing | Flashing | Waiting for setup | Launch the Canon PRINT app |
⚠️ Note: Printer app interfaces and menus may be updated. If the steps described don't match yours, check the latest instructions in the support section of the manufacturer's official website.
Using AirPrint and Mopria technology
If you are the owner of the device Apple, you may not even need the proprietary Canon app. Technology AirPrint Built into iOS, it lets you print documents, photos, and web pages directly from the Share menu. Simply select the file you want, tap the print button, and choose Canon G3415 from the list of available devices.
For Android-based devices, the equivalent standard is MopriaMost modern smartphones support this technology by default. When you try to print, the system will automatically prompt you to install the plugin. Mopria Print Service, if it's not already installed. This ensures universal compatibility without the need to configure complex settings.
What should I do if AirPrint doesn't see my printer?
Make sure your iPhone and printer are connected to the same Wi-Fi network (2.4 GHz). Also, check that your router's firewall isn't blocking the Bonjour protocol, which is required for AirPrint. Restarting the router can sometimes help.
The advantage of using native printing systems is speed and the lack of need to launch additional apps. However, functionality is limited to basic printing: you can't scan or check the exact ink levels without installation. Canon PRINT Inkjet/SELPHY.
Solutions to common problems and errors
Even if you follow the instructions exactly, technical issues may arise. One common problem is "Printer not found." This is often caused by the phone being connected to the router's guest network, which is isolated from the main network where the printer is located. Check your router settings and ensure both devices are on the same network segment.
Another common issue is an error transferring Wi-Fi settings. In this case, try temporarily disabling mobile data (3G/4G/5G) on your smartphone during setup. Sometimes the operating system tries to use mobile data instead of Wi-Fi, which disrupts the configuration process.
- 🔄 Restart your router and printer—this solves 80% of connection problems.
- 📶 Move closer to the router if the signal is weak.
- 🔒 Check that you don't use special characters in your Wi-Fi password, which may be interpreted incorrectly.
- 📲 Uninstall and reinstall the app if it doesn't work properly.
If the printer's error light blinks a certain number of times, you can find the meaning in the manual. For example, a series of blinks could indicate a memory buffer overflow or a print head issue. In such cases, the wireless connection isn't the issue; service is required.
Comparison of connection methods and final recommendations
The connection method you choose depends on your needs. If the printer is in an office and many different people need to connect to it, it's best to configure it via a router. If it's a home device for personal use and you rarely print, the router mode Direct It may even be more convenient, since it does not depend on the state of the home network.
Remember that software is a living organism. Periodically check for firmware updates for your device. Canon G3415Updates often include security fixes and Wi-Fi module stability improvements, which is especially important in the noisy airwaves of apartment buildings.
Proper setup wireless network Transforms your MFP from a simple peripheral into a fully-fledged home printing hub. You gain the freedom to move around your home or office without being tied to a desk, and you can print with one hand while the other is busy with your child or a cup of coffee.
Why won't my Canon G3415 printer connect to 5GHz Wi-Fi?
The Wi-Fi module in the G3415 model only supports the 802.11 b/g/n standard, which operates in the 2.4 GHz band. The 5 GHz frequency (ac/ax standard) is physically unavailable for this device. You need to enable the 2.4 GHz band in your router settings.
How do I reset my printer's network settings to factory defaults?
To reset network settings, press and hold the Stop button on the printer control panel until the alarm indicator flashes 15 times. Then release the button. The printer will reboot the network module and all saved Wi-Fi passwords will be deleted.
Can the Canon G3415 be connected to a hidden Wi-Fi network?
Directly connecting to a hidden network (Hidden SSID) through the standard application menu is often impossible, as the printer must first "see" the network. It is recommended to temporarily make the network visible for the initial setup, and then, if necessary, hide the SSID again, although stability is not guaranteed in this mode.
What is the maximum range for Wi-Fi printing?
The range depends on your router's power and the presence of obstacles (such as walls). In open spaces, the 2.4 GHz standard can reach a range of 50-100 meters. In an apartment with concrete walls, a strong signal typically remains within 10-15 meters of the router.