Modern printing technologies have long since advanced, freeing users from the need to look for a cable for each work session. Model Canon Pixma TS3640 This compact, multifunctional device can become a fully-fledged home printing center if its wireless connection is properly configured. Connecting the printer to a local network allows you to print documents and photos directly from your smartphone, tablet, or laptop, significantly increasing ease of use.
Setup process wireless interface This model's operation may seem complicated at first glance, especially for those new to this type of technology. In reality, the steps are logical and straightforward, requiring only careful adherence to on-screen or software instructions. It's important to understand that the stability of the device directly depends on the signal quality and the correctness of your network security settings.
In this article, we'll take a detailed look at all possible ways to activate Wi-Fi, from the standard procedure via the printer's menu to using a mobile app. Canon PRINT Inkjet/SELPHYYou'll learn how to avoid common mistakes, what to do if your device doesn't detect the router, and how to ensure a secure connection. Getting up and running will only take a few minutes if you follow the steps below carefully.
Equipment preparation and requirements verification
Before beginning software setup, ensure the device is physically ready for operation. The printer should be unpacked and free of any shipping tapes or orange tabs, which often block the carriage or paper tray. Plugging the device into a power source is the first mandatory step, after which you should wait for the initialization cycle to complete.
Make sure your printer has cartridges and paper installed, as some models may enter standby mode or display errors when trying to set up without supplies. It's also crucial to have a working wireless network with a known password. If your router uses a 5 GHz signal, keep in mind that Canon TS3640, like most budget models, operates exclusively in the 2.4 GHz range.
For successful synchronization, you'll need an intermediary device: an Android or iOS smartphone, or a Windows or macOS computer. This device must have a browser installed to access the setup interface or a dedicated manufacturer app. Check the signal strength in the location where you plan to install the printer: if the Wi-Fi indicator on your phone shows one bar, reliable printing may not be possible.
⚠️ Attention: Make sure your router's Client Isolation feature isn't enabled. This feature prevents devices on the network from communicating with each other. If this feature is enabled, the computer simply won't see the printer, even if both are connected to the same access point.
Activating wireless mode on the printer
The first step in the setup process is to put the printer itself into standby mode. On the control panel Canon Pixma TS3640 You need to find a button with an antenna or a wireless network icon. It's usually located next to the power button or in the top row of control keys.
Press and hold this button until the power light starts flashing, then release it. Then press the black and white copy button, then the color copy button. This combination puts the printer into a special setup mode, indicated by the flashing Wi-Fi light.
If the wireless indicator light turns on and continues to blink, it means that Wi-Fi module The printer is activated and ready to search for a network. At this stage, the device is not yet connected to the internet; it is simply broadcasting a signal indicating it is ready to pair. If the indicator light is solid, the printer already has saved settings that may need to be reset before a new configuration.
Using the Canon PRINT app to set up
The most convenient and modern way of configuration is to use the proprietary application. Canon PRINT Inkjet/SELPHYIt's available for free download in the App Store and Google Play. After installing the app, launch it and add a new device by tapping the corresponding "+" icon or the "Add Printer" button.
The app will automatically scan for available networks and devices. Once it finds yours, Canon TS3640, a request to transfer Wi-Fi settings will appear on your smartphone screen. You'll need to select your home network from the list and enter the password. The app will automatically transfer this data to the printer via a temporary direct connection.
The settings transfer process may take from 30 seconds to 2 minutes. During this time, keep your smartphone turned on and close to the printer. Once the data transfer is successful, the indicator on the MFP will stop flashing and turn solid, indicating a successful connection to the local network.
☑️ Checklist for setting up via the app
Setting up via the Smart Panel menu on your computer
For users who prefer to work with a PC, the manufacturer offers a utility Canon IJ Smart PanelThis software not only allows you to configure your network but also manage scanning and device maintenance. Download the driver and software package from the official support website, selecting your operating system.
During the driver installation process, the program will prompt you to select a connection type. Select "Wireless LAN" or "Wi-Fi connection." The program will then prompt you to press the wireless button on the printer, after which it will begin searching for the device on the network. If the automatic search is unsuccessful, you can use WPS if your router supports it.
The WPS method allows you to connect devices without entering a password. To do this, press the WPS button on the router, then the Wi-Fi button on the printer. The devices will find each other and exchange encryption keys automatically. However, it's worth noting that this method is less secure and isn't always available on corporate networks with complex security architectures.
⚠️ Attention: When installing drivers on Windows, the security system may prompt you to confirm changes. Be sure to click "Yes" or "Allow," otherwise the installation will be interrupted and the driver's network components will not be installed.
What should I do if my computer can't see my printer on the network?
Make sure your computer and printer are connected to the same network (SSID). Check to see if Windows Firewall or antivirus software is blocking the connection. Try temporarily disabling them for diagnostics. Also, make sure the network profile on your PC is set to "Private" and not "Public."
Solving common connection problems
Despite the simplicity of the process, users often encounter technical difficulties. One of the most common issues is an incorrect Wi-Fi password. Unlike a computer, a printer doesn't have a keyboard to correct errors, so if you enter an incorrect password through the app, you'll have to start the process over again, carefully checking the capitalization of the letters.
Another common issue is a weak signal. Printers are often placed on shelves or in niches where the signal strength is significantly reduced by walls or metal objects. If the printer's indicator light is blinking slowly or the device is constantly losing connection, try moving the router closer or using a Wi-Fi repeater.
Problems can also occur due to a router buffer overflow. If you have multiple devices connected to your network (smartphones, TVs, smart bulbs), the router may not assign a new IP address to the printer. In this case, a simple router reboot will help: unplug it for a minute, then plug it back in.
| Symptom | Possible cause | Solution |
|---|---|---|
| The Wi-Fi indicator is blinking | There is no connection to the router | Check the password and signal range |
| The printer was not found on the network. | Different networks or firewall | Check your PC's SSID and security settings |
| Printing is interrupted | Unstable signal | Move the router or printer closer |
| IP address error | Address conflict in DHCP | Restart the router and printer |
Setting up AirPrint and cloud printing
After successfully connecting to Wi-Fi, Apple device owners will have access to the technology AirPrintTo print from an iPhone or iPad, simply open a document or photo, tap the "Share" button, and select "Print." Your device will automatically detect it. Canon TS3640 in the network if they are in the same segment.
For advanced features, such as printing from anywhere in the world where there is internet access, you can register your printer with the service. Canon PRINT Inkjet/SELPHY With cloud printing, you'll need to create a Canon account and link your device using a unique code, which can be found in the network information menu.
Cloud printing allows you to send documents to your home printer directly from work or school. However, this requires the printer to be constantly on and connected to the network. Make sure deep sleep is disabled in the power saving settings, as it can interrupt the connection to the server.
Questions and Answers (FAQ)
Can Canon 3640 be connected to a 5GHz network?
No, the Canon Pixma TS3640 only supports the 2.4 GHz wireless standard (IEEE 802.11b/g/n). If your router is broadcasting two networks with the same name, try temporarily separating them or forcing your phone to connect to the 2.4 GHz network during setup.
What should I do if the printer prints "white sheets" after connecting?
This indicates a problem with the cartridges, not the Wi-Fi. Check that the protective films have been removed from the new cartridges and that they are securely installed. Also, perform a deep cleaning of the nozzles using the maintenance menu.
How do I reset my printer's network settings?
Press and hold the Stop/Reset button on the control panel until the alarm indicator flashes a certain number of times (usually 15-20 times), or use the button combination to re-enter the setup mode as described at the beginning of the article.
Why did my printer disappear from the list of available devices?
Most likely, the device's IP address changed after rebooting the router, or the printer went into sleep mode. Try restarting the search in the app or rebooting the printer itself by pressing the power button.