Many owners of the popular model Canon Pixma MP495 Some people want to print photos and documents directly from their smartphone, bypassing the computer. This is entirely possible, but it requires proper network connection setup, as this MFP does not have a built-in password entry screen. The setup process wireless network It may seem complicated only at first glance if you don’t know the sequence of actions.
To successfully sync, you'll need a stable router signal and your home network password. It's important to understand that printer The printer must be located in a strong signal area to avoid connection drops while printing. In this article, we'll cover all the connection details, including using the mobile app and possible errors.
Before you begin, make sure your router is turned on and distributing the Internet, and Canon MP495 filled with ink. Wireless connection Configuration is done via button combinations on the device's control panel, which requires careful attention. We'll cover a step-by-step guide for Android and iOS users.
Equipment preparation and compatibility testing
The first step is physical preparation Canon MP495 MFP To use wirelessly, make sure the device is plugged in and turned on. The power indicator should be solid and not flashing, which could indicate warming up or an error.
The second important point is to check the compatibility of your mobile device. To work with Canon Pixma MP495 The smartphone must support Wi-Fi 802.11b/g/n standards. Modern phones based on Android and iOS fully support these protocols.
⚠️ Important: Make sure your phone and printer are on the same Wi-Fi network (same SSID). If your router broadcasts 2.4 GHz and 5 GHz networks with different names, connect the devices to the 2.4 GHz network, as older printer models may not see the 5 GHz network.
It's also a good idea to know your Wi-Fi network password in advance if it's not saved on your phone. In some cases, you'll need to enter it manually. Network settings must be correct to avoid IP address conflicts.
Activating wireless network mode on the printer
To get started, you need to translate Canon MP495 into connection standby mode. On the front panel of the device, look for a button with an antenna or Wi-Fi icon. Pressing this button initiates a search for available networks or puts the device into setup mode.
If the wireless indicator is on Canon Pixma MP495 When the button starts blinking, it means the module is activated and ready to pair. In some cases, you may need to hold it down for a few seconds until you hear a distinctive beep or the blinking frequency changes.
There is a quick setup method via a button Wireless And DirectPressing the combination allows you to switch the adapter's operating modes. Network indicator should flash blue, indicating that it is ready to establish a connection with the router.
If the automatic search doesn't start, you may need to reset your network settings to factory defaults. This is often done by long-pressing the setup button or using a key combination. After the reset printer will return to the original waiting state.
Setting up a connection via WPS (the fastest method)
The easiest way to connect Canon MP495 Wi-Fi is connected using WPS (Wi-Fi Protected Setup) technology. This method allows you to automatically transmit the network password, eliminating the need to manually enter it on a printer without a display.
First, find the button WPS On your router's body. It may be a physical button or a virtual one in the router's web interface. Press and hold it for 2-3 seconds until the WPS indicator on the router starts blinking.
Immediately after this, within 2 minutes, press the button Wireless on the panel Canon MP495The device will automatically detect the WPS signal and attempt to establish a secure connection. The printer's indicator light will stop flashing and turn solid when the connection is successful.
- 📶 Find the WPS button on your router and press it.
- 🖨️ Press the Wireless button on the Canon MP495 within 2 minutes.
- ✅ Wait until the Wi-Fi indicator on the printer stops blinking.
- 📱 Check if the new device appears in the router's client list.
⚠️ Note: If your router doesn't support WPS or this feature is disabled in its security settings, this method will not work. In this case, you will need to use the manual configuration method via the Rescan button or the app.
Manual Wi-Fi setup using the Rescan button
If the WPS method is not available, Canon Pixma MP495 Allows you to configure the settings using the Rescan function. Press and hold the button Wireless on the control panel until the power indicator flashes once.
After that, click the button Rescan (or the network selection button, depending on the interface version). The printer will begin searching for available networks. Make sure you know the name of your network (SSID), as automatic selection may not work if SSID is hidden.
Some modifications require using a computer for initial setup via a USB cable and then switching to Wi-Fi to enter the password. However, for Canon MP480/MP490 The "Push Button" method described above is often used in this series. If the Rescan button doesn't activate input mode, try resetting the network settings.
Manually entering a password on devices without a display is extremely difficult and is usually done via a PC. Therefore, if WPS doesn't work, we recommend using direct printing or an initial configuration app if your model supports it.
What to do if WPS doesn't work?
If WPS isn't working, try updating your router's firmware or temporarily disabling MAC address filtering. Also, make sure your router isn't using too complex encryption (WPA2-PSK only), which your old printer module may not support.
Using the Canon PRINT Inkjet/SELPHY app
To work comfortably with your smartphone, you need to install the official application Canon PRINT Inkjet/SELPHYIt's available on Google Play for Android and the App Store for iOS. This software acts as a bridge between your phone and Canon MFP.
Launch the app and select the option to add a printer. The program will prompt you to search for a device on the network. If Canon MP495 already connected to Wi-Fi (the indicator is solid), the application will quickly detect it.
If the printer isn't yet online, the app may prompt you to use the "Connect Printer to Network" feature. Follow the on-screen instructions. You'll need to select your Wi-Fi network from the list and enter the password. Your phone will transmit this information to the printer.
| Application function | Description of the opportunity | Required connection |
|---|---|---|
| Photo printing | Printing images from your phone's gallery | Wi-Fi network |
| Scanning | Convert documents to digital format on your phone | Wi-Fi network |
| Copying | Control the copier function from your smartphone | Wi-Fi network |
| Monitoring | Checking ink levels in cartridges | Wi-Fi network |
Once successfully added, you will be able to print documents from Word, PDF, and photos directly. Mobile application It also allows you to change print settings such as paper type and image quality.
☑️ Check before printing
Direct Wireless Mode
The model Canon MP495 Direct Wireless mode is available. In this mode, the printer creates its own Wi-Fi network, which the phone connects to. This allows you to print even without a home router or internet connection.
To activate this mode, press the button Direct on the control panel. Indicator direct connection It will start blinking. On your phone, in the Wi-Fi settings, find the network with a name starting with "Canon_ij_..." or something similar.
When connecting to such a network, your phone may warn you that there's no internet connection—this is normal. The connection password is usually printed on a sticker on the printer or included in the instructions (often "canon00" or similar).
- 🔘 Press the Direct button on the printer.
- 📡 Find the Canon network in the Wi-Fi list on your phone.
- 🔑 Enter the password (often canon00 by default).
- 🖨️ Open the photo and select print.
⚠️ Note: In Direct Wireless mode, your phone will not have internet access, as it will be connected directly to the printer. To connect to the internet, you will need to switch back to your home Wi-Fi.
This method is ideal for quickly printing photos from parties or documents in an office where access to the main network is limited. Direct connection Provides stable data transmission over short distances.
Solved connection problems and errors
Users often encounter a situation where Canon MP495 The device doesn't see the network or loses connection. One possible cause could be the frequency range. As mentioned, the device only operates in the 2.4 GHz band. If the router combines networks under a single name, try separating them in the router settings.
Another issue is an incorrect password or encryption type. Make sure you're using WPA2-PSK (AES) encryption. Older security protocols or passwords that are too complex and contain special characters can cause device handshake errors.
If the Wi-Fi indicator is blinking slowly, it usually means the printer is trying to connect but can't. If it's blinking quickly, it may be searching for a network or there's a data error. Restarting the router and printer often resolves the issue of a frozen network module.
Also check if AP Isolation is enabled on your router. If it's enabled, devices on the Wi-Fi network won't see each other, and your phone won't be able to send a print job, even if both are connected to the same router.
Why doesn't the printer print even though it's connected?
Often, the problem is that the phone is connected to a mobile data connection (4G/5G) rather than Wi-Fi. To print over a local network, both devices must be on the same local Wi-Fi network. Disable mobile data while printing.
Can the Canon MP495 be connected to 5G Wi-Fi?
No, the Canon Pixma MP495 model has a Wi-Fi module that only supports the 802.11b/g/n standard in the 2.4 GHz band. It physically cannot see or connect to 5 GHz networks. Make sure your router is broadcasting a 2.4 GHz network.
What is the default password for Direct mode?
The default password for direct connection mode on many Canon models is "canon00" (all lowercase). However, the exact password is always listed on an information sticker on the back or bottom of the printer.
Does iPhone printing (AirPrint) work on the MP495?
The MP495 model is quite old and may not support native AirPrint directly. For printing from an iPhone (iOS), it is highly recommended to use the Canon PRINT Inkjet/SELPHY app, which emulates the necessary protocols.
What should I do if the Wi-Fi indicator is on but there is no printing?
Check the IP addresses of your devices. Make sure your phone and printer are on the same subnet (e.g., 192.168.1.X). Also, try deleting the printer from the device list in the app and adding it again.