Changing the name of your wireless network is one of the simplest, yet necessary, procedures during initial setup. Often, ISP devices come with factory names consisting of a series of numbers and letters, making them difficult to find in the list of available connections. Rename Wi-Fi MTS Not only is it convenient for you, but it also improves security by hiding information about your router model from outsiders.
Changing the name (SSID) takes just a couple of minutes and doesn't require any technical knowledge. All you need is a smartphone or computer connected to the router and access to the device's web interface. In this article, we'll cover all the setup steps for various equipment models.
Before you begin, make sure your device has a stable connection to the router via cable or your current Wi-Fi network. Any connection interruptions while saving settings may result in you losing access to the admin panel, and you'll have to repeat the process.
Preparing to change router settings
The first step is to physically connect to the equipment. If you're far from the router and connected via Wi-Fi, the network will temporarily disappear after changing the name. Therefore, for the initial setup highly recommended use Ethernet cable, connecting the computer and the router's LAN port.
If using a cable isn't possible, make sure you know the current Wi-Fi network password. After renaming the network, your device will no longer see the old connection, and you'll have to re-enter the password for the new network with the changed name.
☑️ Preparing to set up your router
It's also important to know the address for accessing the settings. Most MTS devices have a standard IP address, but it may vary depending on the model. This information is usually found on a sticker on the bottom of the device.
⚠️ Note: If you change the network name while in wireless mode, the connection will be disconnected immediately after saving the settings. You will need to manually find the new network in the list of available networks and connect to it.
Login to the web management interface
To access the settings, open any browser (Chrome, Safari, Yandex Browser) and enter the router's IP address in the address bar. For most MTS models, such as Huawei, ZTE or Sercomm, the standard address is 192.168.1.1 or 192.168.0.1.
After entering the address, the system will ask for a username and password. These are the login details for the admin panel, not the Wi-Fi password. By default, MTS routers often use a combination of admin / admin or admin / 1234The exact data is always indicated on the sticker under the device body.
In some modern MTS models with technology support Easy Config Login may occur automatically without entering a password if you're connected to this router's network. However, the classic login method remains the most secure.
If your browser says the page is unavailable, check your network adapter settings. Your computer's IP address must be configured to obtain automatically (DHCP) so it can "see" the router.
Find the wireless network settings section
Router interfaces may vary depending on the manufacturer and firmware version. However, the settings layout for MTS is generally consistent. You need to find the section related to wireless mode. Look for tabs with the following names: WLAN, Wireless, Wi-Fi or "Wireless Network".
Often, the settings are divided into several sub-items. Are you interested in the "Basic Settings" section? Basic Settings. This is where the field for changing the network name is located, which is technically called SSID (Service Set Identifier).
On dual-band routers (supporting 2.4 GHz and 5 GHz), you'll see two separate name fields. You can name them the same to combine them into a single network, or give them different names to manually select the frequency.
| Router model | Entrance address | SSID menu location | Standard login |
|---|---|---|---|
| MTS Anywhere (Huawei) | 192.168.1.1 | Wi-Fi -> Basic Settings | admin |
| ZTE H108A | 192.168.1.1 | Network -> WLAN -> Basic | admin |
| Sercomm | 192.168.0.1 | Setup -> Wireless Setup | admin |
| Keenetic (MTS line) | 192.168.1.1 | My Networks and Wi-Fi -> Home Network | admin |
Please note that in some interfaces the field may be called "Network Name (SSID)" or simply "Network Name". Changing this parameter is what key stage renaming your Wi-Fi.
Rules for choosing a username and password
When creating a new name, consider not only creativity but also technical limitations. The network name (SSID) can contain up to 32 characters. It is recommended to use the Latin alphabet, as some older devices may display Cyrillic characters incorrectly, resulting in "scramblers."
Avoid using personal information in your username, such as your apartment number, last name, or address. This can compromise your digital security, allowing hackers or nosy neighbors to identify the owner of your network.
It's important not to confuse the network name and password. The password should be complex and contain mixed-case letters, numbers, and special characters. The name, on the other hand, should be easy to read so guests can quickly find your network.
If you have a dual-band router, it's a good idea to add a prefix or suffix to the name to differentiate the frequencies. For example, MyHome_2G And MyHome_5GThis will help you in the future understand which frequency your device is connected to.
⚠️ Note: Router interfaces and MTS mobile apps are subject to updates. Button locations and menu item names may differ slightly from those described in the instructions. Always search for keywords: SSID, Wireless, Network Name.
Saving changes and reconnecting
After you have entered a new name in the field SSIDDon't forget to click "Save" or "Apply." Without this step, all changes will remain only in the browser's memory and will not be applied to the router.
While saving, the router may reboot the wireless module. You'll see a message on your computer or phone screen informing you that the connection has been lost. This is a normal reaction from your equipment to changes in network settings.
Now you need to find the new network in the list of available connections. Refresh the list of Wi-Fi networks on your device. You should see the name you created. Tap it and enter the password.
If your device says "Unable to connect," try forgetting the network in your phone settings and re-entering the details. Sometimes old connection profiles conflict with new security or name settings.
What should I do if my router doesn't save my settings?
If after clicking 'Save' the page simply reloads and the name doesn't change, try the following: 1. Clear your browser cache. 2. Try logging in through incognito mode. 3. Make sure you're not using ad blockers, which can block router scripts. 4. As a last resort, reset the router using the Reset button on the device.
Setting up via the MTS mobile app
Modern MTS routers often support management via a proprietary smartphone app. This significantly simplifies the process, as it eliminates the need to enter IP addresses or navigate through a browser. Download the "MTS Wi-Fi" or "MTS My Router" app from the App Store or Google Play.
After logging into the app (usually an MTS ID account is required), select your router from the list of devices. In the main menu, find the "Wi-Fi Settings" or "My Network" section.
The app's interface is more user-friendly: the rename field is usually prominently displayed. Enter the desired name, change the password if necessary, and click the update button. The router will automatically apply the settings and reconnect the phone.
The app also lets you set up a guest network, limit access time for children, and see who's currently connected to your Wi-Fi. It's a powerful tool for home management.
Solving typical problems
Sometimes users encounter a situation where the router doesn't respond to commands or the new name isn't displayed. Most often, the issue lies with the DNS cache or browser. Try accessing the settings in Incognito mode or from another device.
Another common issue is old settings sticking on client devices. The phone may try to connect to the network with the SIM name and old password, ignoring a new network with a similar name. In this case, deleting the network profile in the Wi-Fi settings helps.
If you've changed your name but your internet speed has dropped, check to see if your new name matches the name of your neighbors' network on the same channel. While the name itself rarely affects speed, confusion on the air can lead to unstable performance.
In rare cases, especially on older MTS router models, changing the SSID may require a reboot of the device itself. If the network disappears after saving the settings and doesn't reappear with the new name, unplug the router for 10-15 seconds and then plug it back in.
Is it possible to use Russian letters in the Wi-Fi name?
Technically, the standard allows for the use of UTF-8, but many devices (especially game consoles, smart lamps, and older laptops) cannot display Cyrillic correctly. They will display a set of incomprehensible characters. It's better to use the Latin alphabet.
Does the length of a network name affect internet speed?
No, the length of the SSID name does not affect data transfer speed. However, an excessively long name takes up more space in the service frames, which in theory may slightly increase latency, but in real life, this is unnoticeable.
What should I do if I forgot my admin panel password after a shift?
If you've changed your router's password and forgotten it, it can't be recovered. The only solution is to perform a factory reset (hard reset) by holding the Reset button on the router for 10-15 seconds. This will reset all settings, including the Wi-Fi name, to factory defaults.
Do I need to change the Wi-Fi name for 5GHz and 2.4GHz differently?
It depends on your goals. If you give the same names, the device will automatically select the best frequency, but it may sometimes get stuck on the slow 2.4 GHz. Different names allow you to force faster devices to connect to 5 GHz.