Modern routers from Xiaomi's sub-brand offer users a stunning combination of compact design and high performance. Setting up a Redmi router often raises questions for those new to the MIWiFi interface, but the process is much simpler than it seems. Properly configured equipment will ensure stable wireless coverage throughout your entire home or office.
In this article, we'll cover every step of connecting your device, from physically connecting cables to fine-tuning security settings. You'll learn how to properly access the control panel, select the optimal Wi-Fi channel, and update the firmware for maximum speed. Following these steps will help you avoid common mistakes and enjoy fast internet without connection interruptions.
Equipment preparation and physical connection
Before beginning software configuration, it's important to properly assemble the connection diagram. Make sure you have a power supply that meets the requirements for your model and the included patch cord. First, connect the power adapter to a power outlet and the router, and wait until the system indicator lights up solid.
Next, you need to connect the device to your computer or laptop. Take an Ethernet cable and plug one end into any LAN port on the router (usually yellow) and the other end into your PC's network card. If you plan to configure the network via a smartphone, connect to an open Wi-Fi network, the name of which is indicated on the sticker on the bottom of the device.
It's important to remember the order in which you turn on your provider. If your internet connection is via fiber optics or an ADSL modem, first turn on your provider's modem, wait 1-2 minutes for it to fully load, and only then turn on yours. Redmi RouterThis will allow the device to correctly obtain an IP address from the upstream equipment.
☑️ Check before setup
Login to the MIWiFi control panel
After the physical connection, we move on to the software. Open any browser on the connected device. Enter the router's IP address in the address bar. By default, for Redmi and Xiaomi devices, the address 192.168.31.1 or domain name miwifi.com.
If the page doesn't load, check your network card settings. It should be set to obtain an IP address automatically (DHCP). In rare cases, if the address was previously changed, you may need to reset the settings to factory defaults using the button. Reset on the back panel.
When you first log in, the system will prompt you to accept the user agreement. Click "Start using." The interface may be in Chinese or English, but basic settings are intuitive thanks to icons. Changing the language is often as easy as clicking the flag or letter in the corner of the screen.
What to do if 192.168.31.1 does not open?
Make sure your computer is connected to the Redmi router and not to another network. Try opening the address in incognito mode or using a different browser. Also, check if your computer's network card has a static IP address.
Setting up an Internet connection (WAN)
The most important step is setting up your connection type with your ISP. The Redmi router will automatically try to detect your connection type. The most commonly used PPPoE (requires login and password), Dynamic IP (automatically) or Static IP (fixed address).
If your provider uses PPPoE, enter your contract details in the appropriate fields. Password errors will result in network inaccessibility, even if the indicators are lit. For Dynamic IP, simply clicking "Next" is usually sufficient, as the settings are applied automatically.
In some regions, ISPs bind access to the device's MAC address. If you can't connect to the internet, find the "MAC Address Clone" section and select the option to clone the computer's address or manually enter the desired MAC address.
Wi-Fi wireless network configuration
Wireless settings allow you to set a network name (SSID) and password. Modern Redmi routers support the 802.11ac and ax (Wi-Fi 6) standards. It's recommended to combine the 2.4 GHz and 5 GHz bands into a single network with the same name so the device automatically selects the best frequency.
Create a strong Wi-Fi password. Use a combination of mixed-case letters, numbers, and special characters. Avoid simple combinations like your birthday or phone number, as they are easy to guess.
In the security settings section, select the encryption type WPA2-PSK or WPA3, if all your devices support the new standard. This will protect your network from unauthorized access and traffic interception.
Recommended Security Settings Table
To ensure maximum protection for your home network, it's important to set security settings correctly. Below is a table with optimal values for most use cases.
| Parameter | Recommended value | Description |
|---|---|---|
| Encryption | WPA2-PSK / AES | An encryption standard compatible with all devices |
| SSID Broadcast | Enable | Hiding the network only makes sense for advanced users. |
| WPS | Disable | This function is vulnerable to hacking, it is better to disable it |
| Firewall | Enable | Basic protection against external attacks from the Internet |
Firmware update and reboot
After the initial setup, the system may prompt you to update the firmware. Never interrupt the firmware update process., even if the indicators are flashing abnormally. Interrupting data recording may cause irreversible damage to the router's software.
Updates contain fixes for security vulnerabilities and stability improvements. You can check for a new version in the "Status" or "Settings" -> "Update" section. If the automatic update doesn't work, you can download the file from the official website and upload it manually.
After completing all settings and updates, reboot your device. This will clear the cache and apply all changes. To do this, use the "Reboot" button in the interface or simply power cycle the device.
⚠️ Attention: The MIWiFi interface may differ depending on the regional firmware version (Global, CN, RU). Some features may be renamed or moved to other menu sections.
⚠️ Attention: Specifications and available features vary by Redmi router model. Older models may not support Wi-Fi 6 or have fewer LAN ports.
Frequently Asked Questions (FAQ)
How to reset a Redmi router to factory settings?
Find the hole marked on the back panel ResetPress the button inside the hole with a paperclip and hold it for about 5-10 seconds until the system indicator starts flashing orange. Release the button and wait for the device to reboot.
Why doesn't the router see the provider's cable?
Check the cable for integrity and tightness. Make sure the cable is inserted into the port. WAN (usually blue), and not on the LAN. It's also possible that your ISP uses a specific MAC address binding that needs to be cloned.
Can I use a Redmi router as a repeater?
Yes, many models support Wireless Repeater mode. This feature is located in the Wi-Fi settings. However, for stable operation, the primary router and Redmi must be of the same ecosystem or support universal extension protocols.
Where can I download the app for phone control?
The official app is called Mi WiFi (or Xiaomi Home (For some models). It's available in the Google Play Store and Apple App Store. The app lets you manage guest mode, test speed, and update firmware.