It's hard to imagine a modern office or home workspace without convenient wireless printing. Model Samsung M2070 (and its SCX series modifications) remains popular due to its reliability and compact size, but initial wireless setup often raises questions among users. Switching to Wi-Fi eliminates unnecessary cables and allows you to print documents from any device within network coverage.
Before you begin configuration, make sure your MFP supports the wireless module. This is usually indicated by a button with an antenna icon or a corresponding indicator on the control panel. If you've just unpacked the device or reset it to factory settings, the connection process will take no more than 10-15 minutes, provided all the necessary conditions are met.
It is important to understand that security protocol Your home network must be compatible with the printer. Most devices in this series work well with WPA2-Personal standards, but they may encounter difficulties with corporate networks that require web-based authentication. In this article, we'll cover all the current methods for activating wireless mode.
Preparatory stage and equipment testing
90% of successful setup depends on proper preparation of the peripherals. First, make sure the router is turned on, working properly, and broadcasting at 2.4 GHz. Printers of the series M2070, like many other budget models, often do not support the 5 GHz range, so your smartphone or computer must be connected to a 2.4 GHz network for the initial setup.
The second critical point is the availability of drivers. Although operating systems like Windows 10 or 11 can automatically find basic drivers, for full functionality of the wireless module, it's best to download the full software package from the manufacturer's official website or use the included disc. Network settings Printers are controlled through specialized software that is installed on the computer.
⚠️ Important: Before starting setup, make sure the toner cartridge is refilled or a new one is installed and the paper tray is full. The printer may not enter network setup mode if the toner error or jam indicator is illuminated.
It's also a good idea to know your Wi-Fi network password in advance. If you don't remember it, you can find it in your router settings or on a sticker on the router (if the password hasn't been changed). Entering the password will require either the computer screen during setup or the buttons on the printer itself, which requires careful attention.
☑️ Check before connection
WPS method: the fastest connection
The simplest method, which does not require entering a password and installing complex software at the initial stage, is the technology WPS (Wi-Fi Protected Setup). It allows you to connect devices with the press of a single button. This method works if your router also supports this feature, which is true for the vast majority of modern models.
To implement this method, find a button on the router labeled as WPS or the one with the two arrows icon. Press it once (don't hold it too long, otherwise you'll reset the router). The WPS indicator on the router should blink, indicating it's in search mode.
Immediately after this, go to the printer Samsung M2070On the control panel, find the button with the image of an antenna or the button WirelessPress and hold it for a few seconds until the wireless indicator starts blinking. The printer will automatically detect the router and exchange encryption keys.
- 📶 Press the WPS button on the router.
- 🖨️ Hold down the Wireless button on the printer until the indicator light flashes.
- ⏳ Wait until the Wi-Fi indicator on the printer lights up solid.
- ✅ Print a configuration report to check the IP address.
If the printer's indicator light is solid, the connection has been established successfully. The device now has an IP address on your local network and is ready for driver installation. If the indicator light continues to flash or goes out, automatic pairing was unsuccessful, and you should try manual data entry.
Setup via USB cable and installation program
If the automatic method fails, the most reliable option is to use a USB cable to transfer the initial network settings. This is a classic method that guarantees success even on a hidden network or with complex encryption settings. You'll need a USB 2.0 Type AB (printer) cable, which is usually included in the kit.
Connect the printer to your computer via USB and turn it on. Run the driver installation file downloaded from the Samsung website (the support section now often redirects to HP, as Samsung sold its printer business). During the installation process, select the connection type. Wireless Network Connection.
The program will prompt you to select a setup method. Select "Yes, I want to connect the printer now" or a similar option that requires a cable. The installer will automatically transfer your Wi-Fi network's SSID and password to the printer's memory. After the data transfer is successful, the program will prompt you to disconnect the USB cable.
Sequence of actions in the installer:1. Select language and country.
2. Acceptance of the license agreement.
3. Connection type: Wireless.
4. Select the option: "Configure via USB cable".
5. Waiting for data transfer.
After disconnecting the cable, the printer will reboot the network module and attempt to connect to the access point. If everything is successful, you can complete the driver installation over the network. This method is especially advantageous because it installs all necessary components, including the scanner and monitoring utilities, at once.
What should I do if my computer doesn't see my printer via USB?
Make sure the cable is working properly (try a different one). Check if the printer's Ready light is on. Sometimes, reinstalling the motherboard chipset drivers is necessary if the USB ports are not working reliably.
Manual setup via the control panel (WPS PIN or Network List)
In some situations, using a computer for setup isn't possible, such as if you're in the office or using a laptop without a CD drive or USB port. In these cases, you can configure the network directly using the buttons on the MFP. Samsung M2070This process requires careful attention, as the password must be entered by repeatedly pressing the change value buttons.
First, you need to enter the setup menu. This is usually done by long-pressing the button Menu or a combination of buttons. You need to find the item Network or WirelessDepending on the firmware version, the interface may differ, but the logic remains the same: search for a network -> select your SSID -> enter the password.
To enter characters, use the navigation buttons (arrows) and the confirmation button (often this is the button OK or Start). Switch between numbers, letters, and special characters. This may seem inconvenient, but it's perfectly acceptable for a one-time setup. After entering the password, select "Apply" or "OK."
| Action | Button on the printer | Result on the screen |
|---|---|---|
| Enter the menu | Menu (hold) | Display: Menu -> Network |
| Network selection | Up/Down Arrows | Search for available SSIDs |
| Entering a symbol | Left/Right Arrows | Change symbol (A, B, 1, #) |
| Confirmation | OK / Start | Proceed to the next step |
There's also a WPS PIN method. The printer generates a code that needs to be entered into the router settings. Find the option in the printer menu. WPS PIN, write down the 8-digit code. Then, enter this code in the router interface (WPS section). The router will automatically transfer the security settings to the printer.
Installing drivers and completing configuration
Once the printer's Wi-Fi indicator lights up solid, the device is ready to use, but it needs to be "introduced" to the computer. Even if Windows has detected the device automatically, a full driver package is still required for scanning and printing.
Run the installer and select "I already have a printer on the network" or "Add a new printer." The program will begin searching for devices on the local network. If the printer is configured correctly, it will appear in the list with its IP address (e.g., 192.168.1.45). Select it and complete the installation.
Static IP address This is an important setting for offices. By default, the router assigns a dynamic address (DHCP), and after a router reboot, the printer's address may change, which will disrupt the printing settings on computers. It is recommended to secure the printer's IP address in the router settings (address reservation based on MAC address).
⚠️ Note: Router driver interfaces and web interfaces may be updated. If you don't find an exact match for a menu item, look for synonyms: "Wireless" may be called "Wi-Fi," and "Network" may be called "Network." The logic remains the same.
For macOS users, the process is similar: after connecting the printer to Wi-Fi, go to "System Preferences" -> "Printers & Scanners." Click the "+" sign, and the system will likely automatically detect the device via the Bonjour (AirPrint) protocol, allowing you to print even without installing specific drivers.
Diagnosing problems and printing configurations
If printing isn't working, the first step is to determine whether the printer can see the network. This can be done by printing a configuration report. On the panel Samsung M2070 press the button Menu, go to the section Report (Report) and select Config (Configuration) or Network Config.
Find the section on the printed sheet TCP/IPThe IP address will be listed there. If the address begins with 0.0.0.0 or 169.254.xx, the printer hasn't received an address from the router. Check that the Wi-Fi password is entered correctly (it's case-sensitive) and that MAC address filtering isn't enabled on the router.
It's also worth checking the firmware version. Outdated software may contain bugs that interfere with the stable operation of the Wi-Fi module. You can update the firmware using the utility. SyncThru Web Service, by entering the printer's IP address into the browser's address bar, or through the setup program if it supports online updating.
- 📄 Print a Network Config report to check the IP.
- 🔍 Make sure the IP address is in your router's subnet.
- 🔄 Try rebooting the router and printer one by one.
- 🛡️ Check if your antivirus is blocking your network printer.
A common problem is sleep mode. The printer may go into deep sleep and lose connection. In the power saving settings (via the web interface or driver), try increasing the time before entering sleep mode or disabling deep sleep mode if stability is more important than saving power.
Why can't my Samsung M2070 printer see my Wi-Fi network?
Most likely, your router only broadcasts on the 5 GHz band, and the printer only operates on 2.4 GHz. Go to your router settings and ensure the 2.4 GHz network is active and has a dedicated SSID, or enable mixed mode (b/g/n).
How do I reset my printer's network settings?
Go to the menu Network -> Clear Settings or Reset NetworkConfirm the action. You can also perform a hard reset through the service menu, but this is a last resort. After the reset, you will be required to re-enter your Wi-Fi password.
Is it possible to connect a printer to Wi-Fi without a computer?
Yes, you can use the WPS method (if your router supports it) or through the printer's menu (WPS PIN or manual entry). However, installing drivers on your computer or phone will still require you to initiate the pairing process from the device at least once.
Where can I download drivers if the Samsung website redirects to HP?
This is normal, as HP owns the Samsung printer business. Search for your model in the HP support section or use the direct links to the driver archives for the M2070 series. The model may appear as an HP Laser MFP or remain under the Samsung brand, depending on your region.