Modern office tasks require mobility, and a wired connection to a printing device often becomes a limiting factor. Model HP Laser 107w Equipped with a built-in wireless module, which allows you to place the equipment in any convenient place in the room where there is a router signal. Correct network setup Provides access to printing from laptops, smartphones, and tablets without having to physically switch cables.
Activating wireless mode may seem complicated at first glance, but the manufacturer has provided several connection scenarios for different situations. We'll cover methods using the button. WPS, classic pairing via USB cable and setup via a mobile app HP SmartEach method has its own characteristics, depending on the operating system version and the type of router used.
It's important to understand that the stability of the device directly depends on the signal quality and the correctness of the security parameters entered. Errors when entering a password or selecting an encryption protocol may result in the indicator flashing, but no connection being established. Careful adherence to the steps in this guide will help you avoid common issues and proceed directly to the next step. wireless printing documents.
Equipment preparation and requirements verification
Before you begin working with the software, you must ensure that the equipment is physically ready for operation. Make sure that HP Laser 107w connected to the power supply and the cartridge is already installed inside the case. You will also need to know the exact name of your wireless network (SSID) and its password, since automatic memorization may not work in corporate networks with complex architecture.
Pay attention to the indicators on the control panel. A lit orange light indicates standby mode or an error, while a flashing blue light indicates setup mode is active. For the drivers to work correctly, your computer must have a current operating system that supports modern communication protocols.
⚠️ Important: Make sure your router has a 2.4 GHz signal. Many modern printer models, including Laser 107w, do not support the 5 GHz frequency, and attempting to connect to such a network will result in an error.
It's recommended to temporarily disable VPN connections on your computer or smartphone, as they can block the device from being detected on the local network. If you use MAC filtering on your router, add the printer's MAC address to the list of allowed devices in advance. You can find this address by printing a network configuration report.
☑️ Ready to customize
Connection method via WPS button
The fastest way to establish a connection is to use technology Wi-Fi Protected SetupThis method allows you to transfer security settings automatically, without manually entering long passwords. First, make sure your router supports WPS and that it's enabled (usually a dedicated button on the router or an option in the web interface).
Press and hold the wireless button on the printer for a few seconds until the light starts flashing. Then, within two minutes, press the WPS button on your router. The device will automatically find the network and establish a secure connection, indicated by a solid blue light.
- 📶 Find the button with the Wi-Fi symbol on the front of the device.
- ⏱️ Hold it for about 3-5 seconds until the indicator starts flashing quickly.
- 🔄 Activate WPS on your router within 120 seconds.
- ✅ Wait until the indicator turns solid blue.
If the indicator continues to flash or turns orange, the connection was unsuccessful. This may be due to a timeout or protocol incompatibility. In this case, try repeating the procedure closer to the router or use the alternative USB connection method.
What to do if there is no WPS button on the router?
If there's no physical button, access your router settings through a browser (usually 192.168.0.1 or 192.168.1.1). Find the Wireless or Wi-Fi section and enable the WPS function programmatically, then search for the printer.
Setup via USB cable and computer
The classic method involves using a USB Type-B cable for the initial transfer of network settings. You'll need a standard cable, which is often included in the kit, or one purchased separately. This method is the most reliable, as it eliminates manual password entry errors and network visibility issues.
Download the full package of drivers and utilities from the official support website, selecting your model and operating system. During installation, the program will prompt you to select a connection type—please specify Wireless network connectionFollow the on-screen instructions and, when prompted, connect the USB cable between the printer and your computer.
The software will automatically read your current network parameters and transfer them to the device's memory. Once the data is successfully transferred, the installer will prompt you to disconnect the cable. From this point on HP Laser 107w will work autonomously in wireless mode.
| Stage | User action | Expected result |
|---|---|---|
| 1 | Launching the installer | Opening the connection type selection menu |
| 2 | Selecting Wi-Fi | USB cable connection request |
| 3 | Connecting the cable | Automatic transfer of network settings |
| 4 | Disconnecting the cable | Ready for wireless printing |
Using the HP Smart app for mobile devices
Smartphone owners can set up the device without using a computer using the app HP SmartThis cross-platform solution is available for iOS and Android and allows you to not only set up your network but also manage photo printing and scanning. To get started, your phone must be connected to the same Wi-Fi network you plan to connect the printer to.
Launch the app and tap the plus sign to add a new device. If the printer is in setup mode (blue indicator flashing), the system will detect it automatically. You'll be prompted to select your home network and enter the password directly in the app interface.
- 📱 Download and open the app HP Smart on a smartphone.
- 🔍 Click “Add Printer” or the “+” icon.
- 📡 Choose yours HP Laser 107w from the list of found devices.
- 🔑 Enter your Wi-Fi network password when prompted.
During setup, the app may ask you to enable Bluetooth on your phone—this is necessary for initial device detection. Once the setup process is complete, you'll be able to print documents directly from your gallery or file managers.
Reset network settings and search for the device
If your printer stops responding or your router password changes, you need to reset the network settings. This will restore the device to a state ready for a new configuration. To do this, on the control panel, simultaneously press and hold the wireless button and the cancel button (the cross) for 3-5 seconds.
After the reset, the indicators will begin flashing, indicating pairing mode. If the device isn't visible in the search results, check to see if your network's SSID is hidden. In some cases, you may need to temporarily allow the network name to be broadcast to successfully connect.
⚠️ Note: Resetting network settings does not delete any accumulated print jobs in the computer's print queue, but may require reinstalling drivers if the old ones have stopped responding.
To troubleshoot the network status, you can print a network configuration report. To do this, turn off the device, hold down the wireless button, and then turn on the power while holding the button. The report will show the IP address, connection status, and MAC address, which will help with further troubleshooting.
Solving common connection problems
Even if you follow all the instructions, technical difficulties may arise. Often, the problem lies in antivirus or firewall settings that block detection of new devices on the network. Try temporarily disabling protection or adding a software exception. HP.
If the printer sees the network but won't connect, check the encryption type. The device supports WPA2 and WPA3, but mixed router modes can cause issues. Also, make sure the router hasn't reached its maximum number of connected clients, which is especially true for smaller home models.
- 🛡️ Check your Windows firewall or antivirus settings.
- 📡 Make sure AP client isolation is not enabled on your router.
- 🔄 Restart your router and printer to update the IP addresses.
- 💾 Update your printer firmware through the "Advanced Settings" section.
In rare cases, statically binding the IP address to the printer's MAC address in the router settings can help. This ensures that the device always receives the same address on the local network, simplifying driver work and preventing connection loss after a hardware reboot.
Why doesn't the printer see the 5 GHz network?
Wi-Fi module in the model HP Laser 107w It operates exclusively in the 2.4 GHz band. It physically cannot see or connect to 5 GHz networks. You need to enable a 2.4 GHz guest network on your router or separate the bands by giving them different names.
Is it possible to connect a printer to a hidden network?
Yes, but automatic search won't work. You'll need to use the USB cable or app setup method. HP Smart, where you can manually enter the hidden network name (SSID) and security settings.
What does the flashing orange light mean?
A flashing orange light usually indicates a connection error or low signal strength. Check the password, ensure the router is properly connected, and check for strong interference from microwaves or baby monitors.