Setting up wireless printing in a home office or apartment is not just a convenience, but a necessity, allowing you to free yourself from unnecessary wires and print documents from any device within the router's coverage area. Model Epson L355The popular multifunctional device with a continuous ink supply system has a built-in Wi-Fi module, but initial connection setup can be challenging for the inexperienced user. The process requires attention to detail, as the slightest error in entering the password or selecting the connection method can result in the device failing to find the network or losing connection to the computer.
In this article, we'll cover in detail all available network connection configuration methods for your printer, including using the WPS button for quick start and manually configuring settings through the control panel. We'll also cover the nuances of working with drivers, the specifics of setting up static IP addresses for stable operation on a local network, and methods for diagnosing common errors. Understanding the operating principles wireless interface will help you not only get printing started, but also ensure reliable operation of your equipment in the long term.
Before proceeding with the software, you must ensure that the device is physically ready for operation. The printer must be powered on, have ink, and have no active mechanical errors, such as paper jams. Only if it is in good technical condition will the device's logic correctly activate network protocols and begin searching for available access points.
Equipment preparation and initial start-up
Getting started with any network device requires proper infrastructure preparation. Make sure your router (router) is turned on, configured by your provider, and broadcasting a Wi-Fi signal. The computer or laptop used for configuration must be on the same network you plan to connect to. Epson L355It's best to reduce the distance between the printer and the router during setup to prevent interference from walls or household appliances from affecting signal quality.
Turn on the printer and wait for the self-test to complete. The power indicator should be solid and the ink indicators should not flash, indicating a critical CISS fill level. If an error icon appears on the control panel, troubleshoot the error first; otherwise, the network settings may become inaccessible or reset.
⚠️ Attention: Some router models have a client isolation feature or a guest network that prevents devices from seeing each other. Make sure your PC and printer are connected to the main network, not the guest network.
For the initial installation of drivers and utilities, you will need internet access. Download the latest software package from the manufacturer's official website. Using the included discs is not always effective, as the firmware and driver versions on them may be outdated and not support new operating systems.
☑️ Ready to customize
Using WPS technology for fast synchronization
The easiest way to connect Epson L355 to a wireless network is the use of technology WPS (Wi-Fi Protected Setup). This method allows you to automatically transfer security settings from your router to your printer, eliminating the need to manually enter a complex password on the device's small screen or through a software interface. This method works if your router supports this feature, which is true for the vast majority of modern models.
Click the button WPS On your router's body. On some models, it may be combined with the reset button or require a long press (about 3 seconds). After activating search mode on the router, go to the printer's control panel. Press and hold the button with the antenna or Wi-Fi icon on the panel. Epson L355 until the indicators start flashing, indicating the search and pairing process.
If the connection is successful, the Wi-Fi indicator on the printer will turn green, and you'll see confirmation on the screen (if the model has a display) or via a printed status report. If the connection is unsuccessful, repeat the procedure, ensuring that the time interval between pressing the buttons on the router and printer does not exceed two minutes.
What to do if WPS doesn't work?
If automatic pairing doesn't occur, check whether MAC address filtering is enabled on your router. It's also possible that the WPS function is disabled in the router's security settings. In this case, you'll need to proceed to manual setup via the setup wizard.
Manual setup via the Epson setup wizard
If the automatic method doesn't work or you prefer full control over the process, use the network setup wizard. Run the previously downloaded driver installation file on your computer. In the connection type menu, select "Wireless Network Connection" or "Wi-Fi." The wizard will prompt you to select a setup method: WPS (PIN code) or "Other options."
Select the manual setup option. The program will scan the air and display a list of available networks. Find your home network name (SSID) in the list and click "Next." You will be prompted to enter your Wi-Fi password. Be careful when entering it: the system is case-sensitive. After entering the information, the computer will transfer the configuration to the printer via a temporary USB connection or directly over the air, if the driver version allows it.
During the installation process, you may need to temporarily connect the device with a USB cable to transfer network profiles. Follow the on-screen instructions: when prompted, connect the cable, wait for the data to transfer, and disconnect it when prompted. After this, the printer will restart the network module and attempt to connect to the router automatically.
| Parameter | Description | Where to find |
|---|---|---|
| SSID | Your wireless network name | On the router sticker or in the list of networks |
| Security Type | Encryption type (usually WPA2-PSK) | In the router security settings |
| IP Address | The device's network address | In the printer network status report |
| Subnet Mask | Subnet mask | In the TCP/IP settings of the router |
Setting up a static IP address for stability
By default, the router assigns a dynamic IP address to the printer via the service DHCPThis means the address may change each time the printer is turned on. This is inconvenient for office printing or sharing a printer with multiple users, as computers may lose track of the device. The solution is to assign a static IP address.
First, find out the printer's current IP address by printing a network status report (usually by pressing the network button and the cancel button). Enter this address into the address bar of your computer's browser to access the Epson Net Config web interface. If the page doesn't open, make sure your computer and printer are on the same subnet.
In the web interface, go to the section Network -> TCP/IPDisable obtaining an address automatically (DHCP) and enter the address manually, for example, 192.168.1.200. Make sure the gateway matches your router's address. Save the settings. Now your Epson L355 will always be available at the same address.
Diagnosing and solving common problems
Even with proper setup, issues may still occur. If the Wi-Fi indicator is flashing but the connection isn't established, check the frequency range. Model Epson L355 supports only the standard 802.11 b/g/n and works exclusively in the range 2.4 GHzIf your router only broadcasts 5 GHz or the network names (SSIDs) for 2.4 and 5 GHz are the same, the printer may be "lost." Separate the networks in your router settings by giving them different names, for example, HomeWiFi And HomeWiFi_5G.
Another common issue is the wrong encryption type. Make sure the security type is set correctly on your router. WPA2-PSK (AES)Outdated encryption methods (WEP, TKIP) may not be supported or may be unstable. Also, check if your router settings limit the number of connected devices.
If the printer is visible on the network but doesn't print, try removing the device from the Devices and Printers list in Windows and re-adding it using the port with the correct IP address. Sometimes resetting the printer's network settings to factory defaults (via the menu or a key combination) and repeating the setup process helps.
⚠️ Attention: Antivirus programs and Windows firewalls may be blocking the printer from being detected on the network. Try temporarily disabling protection or adding an exception for Epson apps while setup is in progress.
Firmware update and final check
After a successful connection, it's recommended to check the device's firmware version. Manufacturers periodically release updates that improve the stability of the Wi-Fi module and compatibility with new routers. Use the utility Epson Software Updater to search and install new versions of software.
For a final check, print a test page from any device on the network: smartphone, tablet, or laptop. This will confirm that the drivers are communicating correctly with the printer's network interface. If printing is successful, you can return the devices (laptop, phone) to any location within Wi-Fi range.
Regularly check ink levels online to avoid downtime. Modern monitoring systems allow you to receive notifications on your computer or smartphone, making operation easier. Epson L355 Maximum comfort. A properly configured printer becomes a discreet yet reliable assistant in your digital ecosystem.
Why doesn't the Epson L355 printer detect the 5 GHz Wi-Fi network?
The Wi-Fi module in the L355 model does not physically support the 5 GHz frequency. It only operates in the 2.4 GHz band. You need to connect to the router's 2.4 GHz network. If you have a dual-band router, make sure the 2.4 GHz and 5 GHz networks have different SSIDs to select the correct one.
How do I reset my printer's network settings?
To reset network settings, turn on the printer. Press and hold the network button (antenna icon) and the cancel button (cross or triangle icon) simultaneously for 5-10 seconds until the lights flash. This will reset the Wi-Fi settings to factory defaults and require reconfiguration.
Is it possible to connect Epson L355 to a hidden network (Hidden SSID)?
Connecting to a hidden network is possible, but requires manual configuration. In the setup wizard, select "Enter SSID manually" and enter the network name accurately, maintaining proper case. Automatic network detection will not detect the network in this case.