Multifunctional device Samsung M2070 Series Wi-Fi is deservedly popular in small offices and homes due to its reliability and compact size. However, switching to a wireless connection often presents difficulties for users accustomed to a standard USB cable. Proper Wi-Fi setup not only eliminates unnecessary cables from the workspace but also allows printing from mobile devices and laptops located anywhere in the home.
Activating wireless mode requires careful attention, as the device must correctly pair with your router. Errors when entering a password or selecting a security protocol can result in the printer being visible on the network but unable to receive incoming calls. In this article, we'll cover all setup steps in detail, from checking compatibility to installing drivers on your computer.
Before you begin fiddling with the buttons, make sure your router is working properly and the computer or smartphone you'll be using to configure it is already connected to the same Wi-Fi network you plan to connect the MFP to. This is a fundamental requirement, and ignoring it causes 90% of all connection issues.
Equipment preparation and compatibility testing
The first step is to physically prepare the device. Make sure the MFP is plugged in and within range of your wireless router's signal. The distance shouldn't be too great, and there shouldn't be any thick concrete walls or strong sources of electromagnetic interference, such as microwave ovens, between the printer and the router.
It is critical to know your network settings. You will need the exact network name (SSID) and the password. Pay attention to the case sensitivity: if the password contains a capital letter, it must be entered in capital letters. It's also worth checking that MAC address filtering isn't enabled on your router, which could block new devices.
- 📡 Find out the exact name of your Wi-Fi network and check the spelling.
- 🔑 Prepare your wireless network password, making sure there are no typos.
- 📶 Place the MFP Samsung M2070 at a distance of no more than 10-15 meters from the router for a stable signal during setup.
- 💻 Make sure the computer you are using to configure the printer is connected to the same network as the target printer.
It is worth noting that the series M2070 Supports the 802.11b/g/n standard, which means it only operates in the 2.4 GHz band. If your router is broadcasting a 5 GHz network with the same name, conflicts may occur. In this case, it's best to temporarily separate the networks or ensure that the router correctly processes requests from devices using the older standard.
⚠️ Note: If your router has the "Hidden Network" (SSID) feature enabled, automatic network search may not work. You'll need to manually enter the network name, so keep it handy.
Compatibility testing also includes a firmware update if the device has previously been used in wired mode. The new software version may contain fixes for the Wi-Fi module that improve connection stability with modern routers.
Activating Wi-Fi mode in the control panel
To begin the setup process, you need to put the device into connection standby mode. On the MFP control panel Samsung M2070 Find the button with the image of an antenna or icon WPSPressing this button starts the network search mode or activates the quick connection function if your router supports WPS technology.
If you are using the manual entry method, the sequence of actions will be as follows. Click the button Menu on the panel, then use the navigation arrows to navigate to the item Network or NetIn the menu that opens, select the option Wireless and press the confirm button OK.
Next, the system will prompt you to select a setup method. For most users, the following option is optimal: Infrastructure (Infrastructure), which involves connecting via an access point (router). Select this option and click OKThe printer will begin scanning the surrounding area for available wireless networks.
- 🔘 Click the button
Menuto enter the main settings menu. - 📡 Select an item
Networkand go to the subsectionWireless. - 🏗️ Set the operating mode
Infrastructureto connect via a router. - 🔍 Wait until the scan is complete and a list of available networks appears on the screen.
Once the scan is complete, a list of found networks will appear on the display. Find your router's name in the list. If the network is hidden, select the option Enter SSID and enter the name manually, using the navigation buttons to select characters. This is a more labor-intensive process, but it is necessary in corporate networks with closed broadcasting.
⚠️ Note: Firmware interfaces may vary slightly depending on the software version. If you don't see the above items, please consult the official documentation for your specific device revision.
It's important to understand that the USB cable must be disconnected from the computer when activating setup mode. Otherwise, the drivers may attempt to establish a wired connection, ignoring the wireless settings. Disconnect the cable before beginning the procedure.
Configuration via WPS and manual data entry
There are two main ways to complete the connection: automatically via WPS (Wi-Fi Protected Setup) and manual parameter entry. The first option is significantly easier and faster if your router supports this technology. To do this, click the button WPS on the printer panel, and then within 2 minutes press the same button on the router body.
The devices will automatically exchange encryption keys, and the printer will connect to the network. The Wi-Fi indicator on the MFP panel will stop flashing and turn solid, indicating a successful connection. This eliminates the need for the user to manually enter a complex password.
If the WPS method is unavailable or doesn't work, you'll have to enter the password manually. After selecting your network from the list on the printer screen, you'll be prompted for the password. Use the navigation buttons (up/down arrows to select a character and left/right arrows to move the cursor) to enter the security key.
| Parameter | Description | Recommendation |
|---|---|---|
| SSID | Wireless network name | Select from the list or enter exactly |
| Security | Type of protection | Usually detected automatically (WPA2) |
| Password | Access key | Enter case-sensitive letters |
| IP Address | Network address | Leave "Auto" (DHCP) |
After entering the password, click OKThe printer will attempt to establish a connection. If the password is correct and the signal strength is sufficient, a success message will appear on the screen, along with the IP address assigned to the device by the router. Write down this address; it may be useful for further configuration or diagnostics.
☑️ Checking the WPS connection
If a connection error occurs, the device will prompt you to try again. Often, the problem lies in the wrong encryption type. Make sure your router isn't set to the outdated WEP standard, which modern devices may only support with limitations, or the overly complex WPA3, which older printer models may not support.
Installing drivers and software
Once the printer is successfully connected to the network, you need to install software on your computer so that it can "see" the device. For the series Samsung M2070 It is recommended to use the full driver package Unified Driver, which contains all the necessary components for printing, scanning and managing the device.
Download the latest driver from the official support website. When launching the installer, select "Wireless" as the connection type. The program will automatically search for printers on your local network. If the previous steps were completed correctly, the installer will detect your MFP by IP address.
Follow the installation wizard's instructions. You may be asked to confirm the network address setup. If the automatic search fails, select the manual installation option and enter the IP address you noted during printer setup. This will ensure that the computer knows where to send jobs.
- 💿 Download the full driver package Unified Driver from the official resource.
- 🖥️ Run the installation and select the “Wireless” connection type.
- 🔎 Wait for the device to be detected or enter the IP address manually.
- ✅ Complete the installation and print a test page to check.
It's important not to interrupt the installation process until it's completely complete. During this time, the operating system creates a virtual port for the printer and configures print queues. After installation, it's recommended to restart the computer for all changes to the registry and system services to take effect.
⚠️ Note: Antivirus programs or Windows firewalls can sometimes block network printer installation. If the installation freezes, try temporarily disabling the protection and repeating the process.
For macOS users, the process is similar: after downloading the driver, run the installer. The system may request permission to install software from an unknown developer if the driver isn't signed with a valid Apple certificate. In this case, you'll need to allow the installation in the security settings.
What to do if the computer does not see the printer?
Make sure your computer and printer are on the same subnet. Check if your router has client isolation enabled, which prevents devices from seeing each other. Also, try temporarily disabling your firewall.
Mobile printing and additional features
One of the main advantages of wireless connectivity is the ability to print from smartphones and tablets. Samsung (now HP) has developed an app for Android and iOS devices. Samsung Mobile Print or HP SmartDownload the app from the App Store or Google Play.
The app automatically finds printers on the same Wi-Fi network. Once a device is added, you can print photos, documents from cloud storage (Google Drive, Dropbox), and web pages. AirPrint for Apple devices allows you to print directly from the Share menu, without installing any additional apps.
In addition to printing, the mobile app lets you monitor consumables, receive low-toner alerts, and even scan documents directly to your smartphone. This turns the MFP into a fully-fledged digital office center, accessible from any device.
- 📱 Install the application HP Smart or Samsung Mobile Print on your smartphone.
- 🔗 Make sure your phone is connected to the same Wi-Fi network as the printer.
- 🖨️ Use AirPrint or Google Cloud Print for fast printing.
- 📄 Scan documents directly into the app and save as PDF.
The function is also available NFC (Near Field Communication) on some models in the series. If your smartphone supports NFC, simply touch the back of your phone to the tag on the front of the printer to establish a connection and print the document. This is the fastest way to communicate, without even requiring network configuration in the app.
Diagnosing and troubleshooting
Despite the simplicity of setup, problems sometimes occur. The most common issue is the printer becoming disconnected from the network or the device's status changing to "Offline." First, check the IP address. If the router assigned dynamic addresses (DHCP) and the lease expired, the printer's address may have changed, and the computer may have lost connection to it at the old address.
The solution is to configure a static IP address for the printer via the router's web interface or assign the address to the MAC address. This ensures that the MFP receives the same address every time it's turned on, and the computer drivers always know where to send data.
Another common problem is a weak signal. If the printer is located far from the router or behind shielding structures, data transfer speeds drop, and large documents may take a long time to print or even be interrupted. In such cases, installing a Wi-Fi repeater or relocating the router can help.
If nothing helps, reset the printer's network settings to factory defaults. This is usually done through the menu. Network → Clear Settings or by holding the Cancel/Stop button for 10-15 seconds. After the reset, you will need to repeat the setup procedure.
Why is my printer printing slowly over Wi-Fi?
Wireless printing speed depends on signal quality and channel congestion. If neighboring routers are operating on the same frequency, interference may occur. Try changing the Wi-Fi channel in your router settings to a less congested channel (1, 6, or 11).
Can Samsung M2070 be connected to a 5GHz network?
No, this model only supports the 802.11 b/g/n standard, which operates in the 2.4 GHz band. To connect, make sure your router broadcasts in this band, or use the 2.4 GHz guest network.
How to find out the IP address of a printer?
Click the button Menu on the device panel, go to Network → Network Info or TCP/IPYou can also print a network configuration report by holding down the button. WPS or through the reports menu.
Regular maintenance and proper network configuration will allow your Samsung M2070 Series Work reliably for years to come. Wireless connection offers comfort and freedom that are well worth it.