Connecting the HP Smart Tank 513 to Wi-Fi: A Step-by-Step Guide with Photos and Troubleshooting Tips

Printer HP Smart Tank 513 — is a device with a continuous ink supply system (CISS), which is ideal for home or office use. However, without connection to Wi-Fi You won't be able to use features like printing from your phone, cloud services, or remote control. In this article, we'll cover all connection methods printer to a wireless network, including manual setup, using the app HP Smart and solutions to typical problems.

Feature of the model Smart Tank 513 — the lack of a display, which makes setup difficult for beginners. But don't worry: follow our instructions, and you'll get the hang of it, even without experience. We've covered every detail, from choosing the right router mode to checking compatibility with your device.

1. Preparing for connection: what you need to check before starting

Before you begin setting up, make sure you have completed the following basic conditions:

• 📶 The router is turned on and distributes Wi-Fi (the network indicator lights up green or blue).
• 🖨️ Printer HP Smart Tank 513 connected to the power grid and within the network's range (no further than 5–7 meters from the router).
• 📱 The app is installed on your phone or computer HP Smart (you can download it in Google Play or App Store).
• 🔄 The router is in disabled mode 5 GHz (the printer only supports 2.4 GHz).

If your router operates in dual-band mode (2.4 GHz + 5 GHz), temporarily turn off the network 5 GHz or create a separate network for 2.4 GHzThis is critical: Smart Tank 513 won't see the network 5 GHz, even if they have the same name (SSID).

⚠️ Attention: If you have a router with this function Smart Connect (automatic switching between 2.4 GHz And 5 GHz), it must be disabled in the router settings. Otherwise, the printer will not be able to connect reliably.

Also check that the printer light is blinking. blue indicator (This means it's turned on and ready for setup.) If the indicator is orange, this is an error and needs to be resolved before connecting to Wi-Fi.

Make sure your router is broadcasting 2.4 GHz network|

Disable 5 GHz or Smart Connect mode|

Download the HP Smart app to your phone/computer|

Turn on the printer and wait for the blue indicator|

Place the printer close to the router (within 5 meters)-->

2. Connect via the HP Smart app (the easiest way)

This recommended method For most users, the app automatically detects the printer and guides you through the setup process. Follow these instructions:

1. Turn on Bluetooth on your phone or tablet (required for initial printer detection).

2. Open the app HP Smart and press Add a printer (the “+” icon in the upper right corner).

3. Select Setting up a new printer → Smart Tank 513 (If the printer is not displayed, click My printer is not on the list and follow the prompts).

4. The app will prompt you to connect to the printer's temporary network. Confirm and wait until the printer's indicator light starts flashing. blue-green.

5. Select your home Wi-Fi network from the list, enter the password and wait for the setup to complete.

If an error occurs when entering a password, please check:

• 🔑 The password you entered is correct (case sensitive!).
• 📵 The password does not contain Cyrillic characters or special symbols (the printer may not support them).
• 🔄 Restart your router and printer, then try again.

Important: If your router uses WPA3 security, the printer may not connect. Switch your network to WPA2/WPA in your router settings.

3. Manual Wi-Fi setup using buttons on the printer

If you don't have a smartphone or app HP Smart If it doesn't work, you can connect manually using the buttons on the printer body. This method takes longer, but is reliable.

Algorithm of actions:

1. Make sure the printer is turned on and the indicator light is on. blue.

2. Press and hold the button Wi-Fi (with antenna icon) within 5 seconds, until the indicator starts flashing.

3. Click the button Wi-Fi once again - the printer will start searching for networks. When the indicator starts blinking green, release the button.

4. Wait until the printer finds your network (the indicator will be on green). Click Wi-Fi once again to confirm.

5. Enter your Wi-Fi password using the printer buttons (use the arrows to select characters and OK (for confirmation). This is the most difficult stage - be careful!

If the printer does not find your network:

• 🔍 Make sure the network is visible (not hidden in the router settings).
• 📡 Check that the router is working in the mode 802.11n (in the router settings, select Only 2.4 GHz or Mixed mode).
• 🔄 Restart the printer by holding down the power button 10 seconds.

⚠️ Attention: It's easy to make a mistake when entering a password using the printer buttons. If the indicator turns orange after three unsuccessful attempts, the printer will be locked for 10 minutes. Wait or reboot.

4. Setting up Wi-Fi via a computer (Windows/macOS)

If you have a computer, you can connect the printer to Wi-Fi via HP Smart for PC or standard system tools. Let's consider both options.

Method 1: Using the HP Smart app for Windows/macOS

1. Download and install HP Smart With official HP website.

2. Connect the printer to the computer via USB cable (included in the kit).

3. Launch HP Smart and follow the setup wizard's instructions. The program will automatically detect your model and prompt you to connect to Wi-Fi.

4. Select your network, enter the password and wait for the process to complete.

Method 2: Via the Windows Control Panel

If HP Smart doesn't work:

1. Connect the printer to your computer via USB.

2. Open Control Panel → Devices and Printers.

3. Find HP Smart Tank 513, right click and select Printer properties.

4. Go to the tab Ports → Add port → Standard TCP/IP Port.

5. Enter the printer's IP address (you can find it in the router's list of connected devices or on the printed self-test page).

5. Checking the connection and troubleshooting

After setting up, you need to make sure that the printer stably connected to Wi-Fi. Here's how to do it:

• 📄 Print the self-test page: press and hold the button Cancel (❌) during 5 secondsThe sheet will show the printer's IP address and connection status.
• 📱 Check in the app HP Smart: The printer should show up as Connected with a green tick.
• 🖥️ Check in the router: go to the router's web interface (usually at 192.168.0.1 or 192.168.1.1) and find Smart Tank 513 in the list of connected devices.

If the printer does not connect or loses connection, try:

• 🔌 Reset network settings: press and hold the button Wi-Fi 10 secondsuntil the indicator light flashes orange. Then repeat the setup.
• 📡 Change Wi-Fi channel: In the router settings, select a fixed channel (for example, 6 or 11) instead of Auto.
• 🔄 Update printer firmware: Download the latest version from the HP website and install it via HP Smart.

⚠️ Attention: If the printer periodically turns off after connecting, check your router's power saving settings. Disable this function. Saving Wi-Fi energy or Schedule (schedule), if it is active.

How to reset a printer to factory settings?

To perform a full reset, press and hold the buttons Cancel (❌) and Wi-Fi simultaneously during 15 secondsAll settings, including Wi-Fi, will be deleted. After the reset, the printer will return to its "out of the box" state.

6. Alternative connection methods (if Wi-Fi doesn't work)

If wireless connection is not possible, use alternative methods:

• 🔌 USB cable: Connect the printer directly to your computer. This is reliable, but it reduces mobility.
• 📶 Access Point Mode: Some routers support the mode WISP (connecting to another network). Configure your router as a repeater if your primary network is unavailable.
• 📱 HP Wireless Direct: The printer can create its own network. Turn it on by holding Wi-Fi 3 seconds, then connect to the network DIRECT-xx-HP Smart Tank 513.

For HP Wireless Direct:

1. Activate the mode on the printer (the indicator will flash) blue).

2. Connect to the network on your phone/computer DIRECT-xx-... (The password is usually found on the printer sticker).

3. Open HP Smart and print directly, without connecting to your home Wi-Fi.

This method is convenient for one-time printing, but does not replace a full network connection.

7. Updating firmware and drivers for stable operation

Outdated software can cause connection issues. Update it regularly:

• 🖨️ Printer firmware: open HP Smart, go to Printer Settings → Firmware Update.
• 🖥️ Drivers for your computer: Download the latest version from HP website, choosing a model Smart Tank 513.
• 📱 HP Smart app: Update it through the app store.

If your printer stops working after updating:

• 🔄 Restart your printer and router.
• 📋 Reset network settings (as described in section 5).
• 📞 Contact HP support if the error persists.

Critical note: Firmware version 2204.0 and higher fixes an issue with connecting to networks with the "#" character in the password. If your password contains this character, be sure to update your firmware.

8. Common mistakes and their solutions

Let's look at typical problems and how to solve them:

Error	Possible cause	Solution
The indicator is flashing orange	Connection error or hardware failure	Restart the printer, check the cables
"Unable to find printer"	The printer is not in setup mode or is far from the router.	Bring the printer closer to the router and try searching again.
The printer is connected but does not print.	Drivers are not installed or the port is incorrect	Install the drivers, check the port in the settings
"Incorrect password"	Cyrillic characters or special characters in the password	Change the password to Latin without special characters
The printer turns off after 5-10 minutes	Power saving mode on your router or printer	Disable power saving in your router settings.

If none of the solutions helped, try:

• 🔧 Reset the router to factory settings (button Reset on the back panel).
• 📡 Use another router (for example, a mobile hotspot from a phone).
• 📞 Contact HP support by phone 8-800-555-55-05 (call is free).

⚠️ Attention: Router settings (such as encryption type or frequency range) may change after a firmware update from your internet service provider. If your printer stops connecting after such an update, contact your internet service provider's technical support.

FAQ: Answers to Frequently Asked Questions

Can the HP Smart Tank 513 be connected to Wi-Fi without the HP Smart app?

Yes, this is possible in two ways:

1. Through manual tuning using the buttons on the printer (section 3).
2. Through router web interface, if the printer supports WPS (press the WPS button on the router, then on the printer within 2 minutes).

However, without an application HP Smart You will not be able to use cloud printing and some advanced features.

The printer is connected to Wi-Fi, but the computer can't see it. What should I do?

Check the following:

• Are they installed? drivers for the printer (download from the HP website).
• The correct printer is selected in the printer settings. port (must be TCP/IP with the printer's IP address).
• Turn it off firewall or antivirus - they can block access.

If the problem persists, try connecting the printer via USB and reconfiguring the port.

How do I change the Wi-Fi network on my printer if it's already connected to another one?

There are two options:

1. Via the app HP Smart: Open printer settings → Wi-Fi network → Change network.
2. Reset network settings: press and hold the button Wi-Fi 10 seconds, then re-configure.

After resetting, the printer will forget all saved networks, and you will be able to connect it to a new one.

Can I use the printer without a Wi-Fi connection?

Yes, HP Smart Tank 513 supports:

• Printing via USB: Connect the cable to the computer.
• HP Wireless Direct: The printer creates its own network for direct printing from devices.
• Printing from a memory card: if your model supports an SD card slot (check the package).

However, without Wi-Fi, you will not be able to use cloud services (Google Drive, Dropbox) and print from your phone.

My printer is printing very slowly over Wi-Fi. How can I speed it up?

Causes of slow printing and solutions:

• Weak Wi-Fi signal: Move the printer closer to the router or use a signal repeater.
• Congested channel: In your router settings, select a less busy channel (for example, 1 or 11).
• Poor connection quality: switch the router to standard 802.11n (instead of 802.11b/g).
• Large file size: Reduce the image resolution before printing.