Modern office solutions require mobility, and a laser printer HP Laser 107r is no exception, offering users the ability to print wirelessly. However, despite its stated support for wireless technologies, the initial setup process can be challenging for those new to this type of device. The main difficulty lies in the fact that the device is initially in USB mode, and activation requires a USB cable. wireless module a number of specific actions need to be performed.
In this article, we'll cover all the steps involved in setting up a printer for network operation, installing the necessary drivers, and troubleshooting common connection errors. You don't need to be an IT professional to complete this task; just follow the steps carefully. We'll cover both automated methods and HP Smart, as well as manual configuration via the control panel, which is especially important when working in corporate networks.
Correct setting Wi-Fi This connection allows you to print documents from any device within range of the router, whether it's a smartphone, tablet, or laptop. This frees up your workspace from unnecessary cables and improves ergonomics. Let's get started preparing the equipment before beginning configuration.
Equipment preparation and compatibility testing
Before you begin software setup, you must ensure that the device is physically ready for operation. Printer HP Laser 107r The unit must be placed on a level surface, and the cartridge must be properly filled or installed. It's important to understand that the wireless module in this model only activates after a specific sequence of actions, rather than being constantly lit.
Make sure your router is operating on the frequency 2.4 GHz, as many budget printer models, including the 107 series, may not support the 5 GHz standard or require special configuration to operate in mixed mode. Also, have your Wi-Fi network password ready, preferably writing it down in advance to avoid typing errors.
⚠️ Caution: If the wireless indicator on the printer panel is not lit or flashing, it means the Wi-Fi module is turned off or the device is in USB connection standby mode.
For successful synchronization, you will need a computer with an operating system Windows or macOS, or a mobile device with the application installed HP SmartHaving a USB cable (Type AB) is highly recommended at the initial stage, although setup is possible without one, but with a higher risk of error. Ensure the distance between the router and printer during setup does not exceed 3-4 meters to ensure reliable signal reception.
☑️ Ready to customize
Resetting the printer's network settings
If the printer was previously used on a different network or there were unsuccessful setup attempts, it is strongly recommended to reset the network settings. This action will restore network module to factory settings and clear the list of saved profiles. For the model HP Laser 107r The reset procedure is performed directly from the control panel.
Press and hold the wireless button (antenna icon) and the cancel button (cross icon) simultaneously for 3-5 seconds. The panel lights should flash, indicating the network card is rebooting. The printer will then enter network search or connection standby mode.
It's important to note that resetting doesn't affect basic print settings like paper size or number of copies, but it may change IP address devices on the local network. If you're working on a static network with strict addressing rules, you'll need to take this into account when further configuring your router.
Using the HP Smart app to set up
The most modern and convenient way to connect is to use the proprietary application. HP SmartThis method allows you to automatically detect a device and share your Wi-Fi network settings with it without having to enter complex commands. The app is available for Windows 10/11, macOS, as well as mobile platforms Android And iOS.
Launch the app and click the Add New Printer button. The program will begin searching for devices within range. If the printer is in setup mode (the Wi-Fi indicator is blinking), HP Smart will prompt you to set it up. You'll need to select your network from the list and enter the password.
- 📲 Download and install the HP Smart app from the official Microsoft Store or App Store.
- 🔍 Click "Add Printer" and wait for the model to appear Laser 107 Series.
- 🔑 Enter your Wi-Fi network password when the app requests access to the configuration.
- ✅ Wait for the drivers to install and confirm a successful connection.
During the setup process, the app may ask you to create an account. HP AccountThis requirement is required to activate certain features and receive firmware updates. Without registration in the HP ecosystem, device functionality may be limited to basic printing.
Setup via USB cable (classic method)
If wireless setup via the app fails, the most reliable method remains using a USB cable. This method ensures stable data transfer for driver installation and initial network configuration. Connect the cable between the computer and the port. USB on the back of the printer.
Download the full driver package from the official HP support website. When launching the installer, select "Wireless Connection" or "USB Setup." The program will automatically switch the printer to the correct mode and transfer the network settings.
During installation, the setup wizard will prompt you to select the connection type. Select Wi-Fi and select your network from the list of available ones. After transferring the settings, the printer will disable the USB port for printing and switch to the network. The wireless indicator should turn solid blue.
Sequence of actions:1. Connect USB.
2. Run the installer.
3. Select "Set up a wireless connection".
4. Disconnect USB when prompted by the program.
Keep in mind that you can remove the cable after completing the setup. However, if you need to change the network name or password in the future, you may need to repeat the process. This is standard behavior for entry-level devices that don't have a full-fledged display.
Working with Wi-Fi Direct and mobile printing
Technology Wi-Fi Direct allows you to print directly from your mobile device without using a router. Printer HP Laser 107r Creates its own hotspot that your smartphone or tablet connects to. This is ideal for quickly printing photos or documents when visiting someone or when there's no internet connection.
To activate this mode, press the wireless button on the printer panel. If the indicator light starts blinking, the search mode is activated. A name containing HP-Print and the device model.
The connection password is usually displayed on the mobile device screen when attempting to connect or printed on the configuration information page. To retrieve the password, press and hold the wireless button and the information button (the "i" icon) simultaneously.
| Parameter | Description | Default value |
|---|---|---|
| Network name (SSID) | Printer Access Point Name | HP-Print-107r-... |
| Password | Wi-Fi Direct Access Key | 12345678 (usually) |
| Protocol | Connection type | 802.11 b/g/n |
| Max clients | Number of connected devices | Up to 5 devices |
Usage Wi-Fi Direct This can reduce the speed of the printer's primary wireless adapter if it's simultaneously trying to connect to the router. Therefore, for permanent office use, it's best to set up a connection via the infrastructure network and use Direct as a backup channel.
What should I do if my phone doesn't see the printer in Direct mode?
Make sure geolocation (GPS) is enabled on your phone. On Android and iOS, permissions to search for devices on the local network are often tied to the GPS module. Also, check if AP Isolation is enabled on your router, although this usually has no effect in Direct mode.
Diagnostics and solution
Even if you strictly follow the instructions, situations may arise when the printer HP Laser 107r The printer won't connect to the network. One common cause is an incorrect router frequency range. If your router broadcasts networks with the same name (SSID) for both 2.4 GHz and 5 GHz, the printer may be attempting to connect to an unsupported frequency.
In this case, it is recommended to temporarily separate the networks on the router by giving them different names, for example, HomeWiFi And HomeWiFi_5GConnect the printer to the network without a 5G adapter. After successful setup, the names can be re-merged, although this is not always necessary.
⚠️ Caution: Antivirus software or Windows Firewall may be blocking the printer from being detected on the network. We recommend temporarily disabling protection or adding an exception for HP apps during setup.
Another problem may be hidden SSID Networks. Entry-level printers often can't connect to hidden networks manually. Enable network name broadcasting in your router settings to perform the pairing procedure. Also, check if your router has MAC address filtering enabled.
If the Wi-Fi indicator is blinking blue, it means the printer is attempting to connect or is in setup mode. A solid blue light indicates a successful connection. A glowing or blinking orange light typically indicates an error or no signal.
Frequently Asked Questions (FAQ)
Is it possible to connect HP Laser 107r to a router via WPS?
Yes, this model supports WPS technology. To do this, press the WPS button on your router, then press and hold the wireless button on the printer within 2 minutes until the indicator light starts blinking. The devices should connect automatically without entering a password.
What is the maximum Wi-Fi range of this printer?
The range depends on the power of your router and environmental conditions (walls, interference). In open space HP Laser 107r The signal strength is reliable up to 30-40 meters. Inside an office with concrete partitions, the range can drop to 10-15 meters.
Do I need to remove the USB cable after setup?
Yes, after completing the wireless connection setup, the USB cable should be disconnected. If the cable remains connected, the computer may prioritize the wired connection, ignoring the network status, or the printer may go into USB command mode.
Does the printer support printing from iPhone (AirPrint)?
Yes, HP Laser 107r The HP Printer supports the AirPrint protocol, but only if both devices (iPhone and printer) are connected to the same Wi-Fi network. Wi-Fi Direct printing from iOS is also possible, but requires trust settings in the HP Smart app.