Modern printing devices have long ceased to be bulky devices that require a mandatory cable connection. Model HP DeskJet Ink Advantage Ultra 4729 This compact solution can be placed anywhere in your home with the proper wireless setup. Wireless connectivity allows you to print from smartphones, tablets, and laptops without having to search for a free USB port.
Integrating a printer into a home network may seem complicated at first glance. In fact, HP engineers have provided several activation scenarios. Wi-Fi moduleso the user can choose the most convenient option. It's important to understand that stability directly depends on the router's signal quality and the accuracy of the entered data.
In this guide, we'll cover all available synchronization methods in detail. You'll learn how to use the WPS button for instant connection, how to configure the device using the proprietary app, and what to do if the automatic network search fails. The key is to operate in the 2.4 GHz range, as many older printer models do not support the 5 GHz frequency.
Preparing equipment and checking router settings
Before beginning the active setup phase, you need to ensure your infrastructure is ready to receive the new device. Your router must be powered on, functional, and broadcasting the network you plan to connect to. MFP HP 4729Make sure you know the exact network name (SSID) and password, as the system is sensitive to case and special characters.
Place the printer no more than one meter from the router during setup. This will ensure maximum signal strength and minimize the risk of connection interruption during the critical moment of encryption key transfer. After successful configuration, the device can be moved to any convenient location within the coverage area.
⚠️ Attention: If your router distributes two networks with the same name (dual-band), but different frequencies, temporarily separate them or make sure that the phone and printer are on the same frequency plane (usually 2.4 GHz).
It is also worth checking the status of the indicators on the control panel. Horizontal indicator light Wireless The indicator should either blink to indicate searching mode or remain lit if a connection has already been established. If the indicator does not respond, you may need to reset your network settings to factory defaults.
Quick connection method via WPS button
The easiest way to make friends HP DeskJet 4729 To connect to the internet, use WPS (Wi-Fi Protected Setup). This method avoids manually entering a password, which is especially important if the access key contains complex characters or is too long. For this scenario to work, your router must also support this feature.
Press and hold the wireless button on the printer for 3-5 seconds until the light starts flashing. Within two minutes of this action, press the corresponding WPS button on your router. The device will automatically exchange encryption keys and establish a connection.
☑️ WPS Connection Checklist
If the indicator Wireless If the indicator turns blue and stops blinking, the connection has been successful. If the indicator continues blinking or turns orange, the connection was unsuccessful. This may indicate that the connection timed out or that the WPS function on the router is disabled in the security settings.
What to do if WPS doesn't work?
WPS is often disabled on routers for security reasons or is simply not supported by the ISP. In this case, you must use the HP Smart app or a temporary USB connection for the initial configuration.
Using the HP Smart app to set up
The most versatile and functional way to configure is to use the official application. HP SmartIt's available for Windows, macOS, and Android and iOS mobile platforms. The app not only helps you connect your device, but also allows you to monitor ink levels, scan documents, and perform diagnostics.
To get started, download and install the app from the official store (Microsoft Store, App Store, or Google Play). Launch the app and click the "Add a new printer" button. The system will prompt you to enable Bluetooth on your smartphone or computer to detect nearby devices.
Follow the on-screen instructions: the app will find the model itself HP DeskJet Ink Advantage Ultra 4729 and will prompt you to share your Wi-Fi network settings. All you have to do is confirm the action. During the setup process, the printer may need to briefly create an access point.
| Setup stage | User action | Device response |
|---|---|---|
| Search | Click "Add Printer" | Power and Wireless light blinking |
| Identification | Select a model from the list | Bluetooth confirmation request |
| Configuration | Enter Wi-Fi password (automatically) | Network data transmission |
| Finalization | Waiting for completion | Constant blue indicator light |
The advantage of the method is through HP Smart Automatically updates drivers and firmware. This ensures your printer is running the latest security and compatibility patches. After setup, the app will prompt you to register your device for extended warranty coverage.
Setup via a temporary USB connection
If wireless methods don't work, you can resort to the classic method—a wired connection for initial configuration. You'll need a USB Type AB (printer) cable, which is usually included in the kit but may be missing in some regional versions. Connect the cable to your computer and turn on the printer.
Run the full driver package installation from the manufacturer's official website. During the installation process, the installer will detect the connected device and prompt you to change the connection type. Select "Switch to a wireless connection" or a similar option.
The program will automatically copy the network settings from your computer's operating system to the printer. Once the data is successfully transferred, the system will prompt you to disconnect the USB cable. From this point on HP 4729 will work autonomously via Wi-Fi.
This method is especially useful on corporate networks, where there may be restrictions on direct connections to unknown devices, or in cases where WPS is blocked by the network administrator. It provides the most consistent results, as it eliminates the possibility of manual entry errors.
Wi-Fi Direct mode for printing without a router
A unique feature of the series Ink Advantage Support for Wi-Fi Direct technology is a key feature. This mode allows you to print directly from your smartphone or laptop, bypassing your home router. The printer creates its own wireless network, which your mobile device connects to.
To activate the mode, press the Wi-Fi Direct button on the control panel. The network name and password will appear on the screen (if available) or on the printed configuration report. The network name typically includes the word "Direct" and the device model, for example, HP-Print-xx-DeskJet 4729.
Connect to this network using your phone's Wi-Fi settings and enter the password. Now you can print documents even if your home internet connection is down or your router is turned off. This is ideal for printing photos from your phone when visiting someone or when your main network is down.
⚠️ Please note: When Wi-Fi Direct is active, your phone may lose internet access because it is connected to the printer's local network. To access the internet, you may need to switch back to your home Wi-Fi if the printer does not support dual-mode operation (this depends on the firmware).
Diagnosing problems and resetting network settings
If your printer stops responding or isn't visible on the network, reset the network settings. This will return the Wi-Fi module to factory defaults, clearing saved passwords and configurations. To do this, use the control panel. HP DeskJet 4729 You need to simultaneously press the wireless connection and cancel (cross) buttons for 3 seconds.
The power and wireless network indicators will begin flashing, indicating the reset process. After the device reboots, you can restart the connection process using any of the methods described above. This often resolves issues with the network module freezing.
If the problem persists, check the device list on your router. The printer may be connected but not assigned an IP address due to a DHCP address overflow. In this case, rebooting the router itself may help. Also, make sure your computer doesn't have any older drivers installed, as they could conflict with the new software.
Please remember that software and interfaces are subject to update. If the steps described don't match what you see on the screen, check the latest documentation on the official support website, as application logic is sometimes changed by developers.
Frequently Asked Questions (FAQ)
Can HP 4729 be connected to a 5GHz network?
Most DeskJet series models, including the 4729, operate exclusively in the 2.4 GHz frequency band. If your router broadcasts networks with the same name (SSID) for both bands, try separating them in the router settings or temporarily disabling the 5 GHz band while setting up the printer.
What should I do if the Wi-Fi indicator is blinking blue but there is no printing?
A flashing blue light means the printer is in setup mode or is attempting to connect but the connection hasn't been fully established. Check that the Wi-Fi password is entered correctly. A lit orange light next to the wireless icon indicates a connection error or a weak signal.
Is a USB cable required for continuous operation?
No, the USB cable is only required for initial setup (if you choose this method) or for direct printing when wireless is unavailable. After successful Wi-Fi setup, the cable can be removed, and the printer will operate autonomously.
How to find the IP address of a printer on the network?
To obtain a network configuration report that includes your IP address, press and hold the "Information" button (the "i" icon) on the printer's control panel for a few seconds. The printer will print a page with technical data, including the current IP address.