Modern multifunctional devices allow you to do without unnecessary wires, providing convenient printing of documents and photos directly from your smartphone screen. Model Canon Pixma MG3640S It's a popular choice for home use due to its compact size and broad functionality, including scanning and copying. However, initial wireless connection setup often presents difficulties for users unfamiliar with network protocols.
To successfully integrate a printer into your local network, you need to understand the basic operating principles. Wi-Fi module, built into the device. Unlike a wired connection, proper router security settings and signal stability are critical. In this guide, we'll cover all configuration steps in detail, from hardware testing to installing specialized software on mobile devices.
The synchronization process may vary depending on the version of the operating system of your gadget - be it Android or iOSIt's important to prepare your Wi-Fi network passwords in advance and ensure your router is working properly. Proper configuration will unlock features like cloud printing and network scanning, significantly expanding the capabilities of your MFP.
Equipment preparation and compatibility testing
Before starting the installation procedure, make sure all devices are in good working order and ready for operation. Printer Canon Pixma MG3640S The printer must be plugged in and refilled with cartridges, as it may not respond to setup commands in standby mode. Also, check that your router is broadcasting in the 2.4 GHz band, as this model may not support modern 5 GHz standards.
The smartphone or tablet you plan to use for control must have access to the same wireless network to which you plan to connect the printer. Make sure the modules are enabled on your phone. Bluetooth and geolocation if you plan to use automatic detection methods through the app.
⚠️ Note: If your router uses the Smart Connect feature, which combines 2.4 GHz and 5 GHz bands into a single network with the same name, you may experience difficulties with the initial connection. In this case, we recommend temporarily separating the networks in the router settings or using the WPS method.
To use all features, you'll need free space on your mobile device to install the proprietary app. Don't forget to have your Wi-Fi network password ready, as you'll need it for manual configuration if the automatic methods fail.
Using the WPS button for quick synchronization
The easiest way to connect Canon Pixma MG3640S to the wireless network is technology WPS (Wi-Fi Protected Setup). This method allows you to establish a secure connection without having to manually enter a complex password on a device that doesn't have a full keyboard or screen. To implement this method, your router must also support this feature, which is true for most modern models.
Press and hold the button Wi-Fi on the printer's control panel until the power light starts blinking. Then, within two minutes, press the WPS button on your router. The device will automatically exchange encryption keys and establish a connection.
A successful connection is confirmed by a steady light on the wireless network indicator on the MFP. If the indicator continues to flash or goes out, the connection is not established, and the procedure must be repeated moving closer to the router.
Standard setup via wireless connection
If the WPS method is unavailable, you'll have to use the standard setup procedure via the device's menu. To enter setup mode, press and hold the button. Direct (or the button with the smartphone image, depending on the interface version) until the power indicator flashes. Then press the color or black and white print button to confirm the wireless LAN mode selection.
Once network search mode is activated, the power indicator will remain solid and the Wi-Fi indicator will begin blinking. This means the printer is ready to pair with a computer or mobile device via a temporary access point. At this point, you should start searching for new devices on your smartphone or PC.
The next step is to select your home network from the list of available ones and enter the password. The entry interface can be implemented through blinking LEDs (the number of blinks corresponds to a number or letter) or through an on-screen menu if you're using a PC for the initial configuration.
☑️ Checking readiness for setup
Installing the Canon PRINT Inkjet/SELPHY app
To take full advantage of the features Canon Pixma MG3640S You need to install a specialized app on your mobile phone. It's available in stores. Google Play Market for Android and App Store for iOS. This software acts as a bridge between your device's operating system and the printer drivers.
After downloading and installing the app, launch it and follow the on-screen instructions. The app will automatically attempt to find an MFP connected to the same network. If the device is found, you can immediately start printing photos or documents. If the printer isn't detected, the app will prompt you to set it up again.
The app not only prints but also scans documents directly to your phone's memory and checks ink levels. Regular updates ensure compatibility with new operating systems and the addition of new features.
| Function | Description | Necessity |
|---|---|---|
| Photo printing | Outputting images from a phone | High |
| Scanning | Saving copies to PDF/JPG | Average |
| Monitoring | Checking ink levels | Average |
| Copying | Remote start of the copier | Low |
Canon Wireless Direct Mode
In situations where the router is unavailable or you are away from home, you can use technology Wireless DirectIn this mode the printer Canon Pixma MG3640S It automatically creates a Wi-Fi hotspot that your smartphone connects to directly, bypassing the router. This is especially convenient for quickly printing photos from parties or documents on a business trip.
To activate this mode, press the button Direct on the printer's control panel. On your smartphone's screen, a name starting with the prefix "Canon_..." or containing the device model will appear in the list of available Wi-Fi networks. Select this network and enter the password, which is usually printed on a sticker on the printer or provided in the instructions (the default password is often the serial number).
After connecting the printer to the network, open an app or photo gallery and select a file to print. Data transfer speeds in Direct mode may be lower than through a router, but for small documents and photos, this isn't a critical issue.
⚠️ Note: In Direct Connection mode, your phone may temporarily lose internet access because it will be connected to the printer, not the global network. Make sure all necessary files are already downloaded to your device's memory.
Solving common connection problems
Even if you follow the instructions carefully, technical difficulties may arise. Often, the problem lies in the router's security settings, such as filtering. MAC addresses or using outdated encryption protocols. If the printer isn't visible on the network, try temporarily disabling MAC address filtering in your router settings or creating a guest network with basic security settings.
Another common cause of problems is incompatible Wi-Fi channels. Some Canon devices perform poorly on channels above 11. It's recommended to set the router channel to 1-11 to ensure a stable connection.
If all else fails, reset the printer's network settings to factory defaults. This usually involves pressing and holding the button. Stop (Stop) until the alarm indicator flashes a certain number of times (usually 15 or 20 times, depending on the board revision). After this, the setup procedure will need to be repeated.
Reset network settings
To completely reset the Canon Pixma MG3640S network settings, press and hold the Stop button until the orange alarm indicator flashes 15 times, then release. The printer will reboot the network module.
Frequently Asked Questions (FAQ)
Is it possible to connect a printer to a phone without a router?
Yes, this is possible using Wireless Direct mode. The printer creates its own Wi-Fi network, which you connect your phone to directly. However, to access the internet on your phone at this point, you'll need mobile data (3G/4G/5G), as the Wi-Fi module will be busy connecting to the printer.
Why isn't my printer in the Canon PRINT app?
Make sure your phone and printer are connected to the same Wi-Fi network. Also, check if your antivirus or firewall is blocking local network communication on your phone. Sometimes, restarting both devices helps.
Does the MG3640S support AirPrint printing?
Yes, model Canon Pixma MG3640S supports Apple AirPrint technology, which allows you to print from Apple devices (iPhone, iPad) without installing additional drivers, provided that they are on the same network.
How to find out the IP address of a printer?
You can find out your IP address by printing a network connection report. To do this, click the button Stop Press and hold the power button until the power indicator flashes twice, then release. The printer will generate a report showing the current IP address on the local network.