Owners of budget video surveillance systems often face the need for initial setup or reconnecting the device to the network. The question "what is the yicarcam Wi-Fi password?" arises when the camera fails to connect to the router or requires access to the device's local menu. Factory default data is often lost, and the stickers on the camera's housing fade or wear off over time. In this article, we'll examine all possible factory codes and steps to restore access.
It is important to understand that modern IP cameras rarely have a single universal combination of symbols for all models. Factory password The exact combination depends on the specific firmware and hardware revision. However, there are several common options used by OEM equipment manufacturers. Knowing these combinations will help you save time when you first attempt to log in to the app or web interface.
In most cases, Yicarcam devices work through cloud services such as V380 Pro or YooseeThis means that direct access to the camera's WiFi module is often achieved not through a browser, but via Bluetooth or a direct WiFi connection from a smartphone to the camera's access point. It is at this stage that the system requests a security code, which may be blank or default.
⚠️ Attention: If you've previously changed your network settings, the default passwords won't work. In this case, you'll need to perform a hard reset, which we'll cover in the following sections.
Factory default passwords and logins
When attempting to connect the camera to a new WiFi network or access its settings, the system may request credentials. For devices of the brand Yicarcam and their equivalents, one of three authentication scenarios is most often used. The first and most common option is the absence of a password. The input field must be left blank and the confirmation button must be clicked.
The second option involves using a universal code adminThis login is often duplicated in the password field. Some models require a numeric combination. 123456 or 12345678This data is written into the firmware by the manufacturer and remains valid until the first successful user authorization.
- 🔑 Empty field (do not enter anything)
- 🔑Combination admin/admin
- 🔑 Digital code 123456
The third option is less common, but does appear on older batches of equipment. It uses a unique device identifier (UID) as a password. The UID typically consists of alphanumeric characters and is located on a sticker under the lens or on the bottom of the housing. Unique code Provides basic protection against accidental connection of foreign devices within the signal range.
Where to find UID and authorization data
To successfully configure the device, you will need to find the unique device identifier. On the cameras Yicarcam It's most often found on the factory label. The location of the sticker depends on the form factor: for dome cameras, it's located under the pan/tilt mechanism, while for bullet cameras, it's on the bottom of the housing or on the cable end.
On the sticker you are interested in the field marked as UID, ID or Serial NumberThis code is often used as the initial login. A QR code may be displayed nearby; scanning it automatically enters the data into the app. In some cases, the default password is also printed in small print next to the UID, such as Password: 123456.
| Data location | Designation | Example of meaning | What is it used for? |
|---|---|---|---|
| Sticker under the lens | UID / ID | YI380-12345678 | Login and WiFi network name |
| Bottom of the body | PWD | admin | Access password |
| Box (sticker) | SN | 88392011 | Backup identification |
| Application screen | Device Info | Ver 3.02 | Checking the firmware version |
If the sticker is damaged or illegible, you can try to obtain information through the app if the camera was previously linked to the account. In the section Device Settings → Information The full UID is often displayed. Without this code, restoring access via cloud services may be impossible, so it's recommended to photograph the label immediately after purchase.
What should I do if the sticker has worn off?
Try scanning the QR code on the box or manual. If that's not possible, the only option is a factory reset. After that, the camera will automatically announce its UID via a beep or voice prompt when turned on.
Hard Reset Procedure
When the default passwords don't work and the UID is unknown, the only solution is a forced factory reset. This procedure will restore the camera. Yicarcam to factory defaults, clearing all user data, including WiFi settings and passwords. On the device's body, usually next to the MicroSD card slot, there's a button Reset.
To reset the camera, power it on. Wait for the boot process to complete (usually 30-60 seconds), which will be indicated by a distinctive beep or voice greeting. Then press and hold the Reset button for 10-15 seconds. The indicator light on the camera will begin flashing or the beep tone will change.
☑️ Factory reset algorithm
After releasing the button, the camera will reboot. At this point, it will recreate its WiFi access point with a name containing the UID and wait for a connection. The password for logging into this network will reset to the factory default (usually 12345678 (or an empty field). You can now re-add the device to the app using standard security protocols.
⚠️ Attention: Do not disconnect the camera's power during the reset process. Interrupting the process of writing the new configuration to memory may cause a software failure, requiring a firmware update via the UART interface.
Setup via V380 Pro and Yoosee app
Most Yicarcam cameras are controlled via mobile apps. V380 Pro or YooseeAfter resetting the settings, launch the app and register an account. Click the add device button (usually the "+" icon in the upper right corner). The app will ask you to select the connection type: cable (QR code) or WiFi (smart configuration).
Select "WiFi Smart Config" or "Sound Wave Configuration." Enter the password for your home WiFi network (2.4 GHz). The camera, in standby mode (after reset), will receive data and attempt to connect to the router. If using the sound wave method, move the phone speaker closer to the camera's microphone.
- 📱 Make sure your phone is connected to a 2.4 GHz network
- 📱 Enter your WiFi password carefully, paying attention to the case
- 📱 Keep your phone close to the camera while transferring data
A successful connection will be confirmed by a voice message saying "Connected" or "WiFi connected." After that, the app will prompt you to set New Password for the camera itself. This step is critical for security, as it replaces the default factory code with your unique combination. Don't skip this step and leave the device with default passwords.
Connection and bandwidth issues
One of the most common reasons why users search for a password or are unable to connect is frequency incompatibility. Cameras Yicarcam budget segment operate exclusively in the range 2.4 GHzThey physically cannot see or connect to 5 GHz networks, even if the password is entered correctly.
Modern routers often combine both bands under a single name (Band Steering technology). In this case, the camera may attempt to connect via the 5 GHz band and be rejected. The solution is to separate the networks in the router settings (even temporarily) or create a guest network with a forced 2.4 GHz protocol.
Signal strength is also important to consider. The WiFi module in these cameras has a small antenna. If the device is installed far from the router or behind thick walls, the handshake process may be interrupted. In this case, the camera will constantly ask for a password or display a timeout error.
Security questions and password changes
Using default passwords makes your video surveillance system vulnerable. Attackers use bots to scan networks and find cameras with passwords like admin or 123456After the first setup, be sure to change the device access password in the section Settings → Security.
Create a complex combination of letters and numbers. Write it down in a safe place. It's also recommended to regularly update the camera's firmware through the app if the manufacturer releases updates. This patches vulnerabilities in the software code that could allow unauthorized access.
If you notice any unusual camera behavior (such as turning on by itself, rotating, or making strange noises), immediately change your password and check the list of authorized users. As a last resort, perform a hard reset and reconfigure the device with the new security information.
What is the default password for Yicarcam camera?
The most common passwords used are blank (the field is left empty), "admin," or "123456." The exact password depends on the model and firmware version.
What should I do if the camera doesn't see the WiFi network?
Make sure your router is broadcasting in the 2.4 GHz band. Yicarcam cameras do not operate in the 5 GHz band. Also, check that your network's SSID isn't hidden.
How to reset Yicarcam camera to factory settings?
Find the Reset button on the camera body. With the camera turned on, press and hold it for 10-15 seconds until you hear a beep. The camera will reboot to factory settings.
Is it possible to watch Yicarcam without internet?
Yes, on a local network. However, for remote viewing via 4G/3G or another WiFi network, internet access is required. Some models allow recording to a memory card without an internet connection.
Why does the app say "Device offline"?
This could mean the camera is turned off, has lost its WiFi connection, or the router has blocked the device. Check the power and status of the indicators on the camera body.