YiCarCam WiFi: Where to find the camera's network password and how to reset it

Car DVRs YiCarCam Wi-Fi hotspots have become popular due to the convenience of viewing recordings directly on a smartphone. However, many users face a problem: after the first connection, the camera's network password is forgotten, and standard combinations like 12345678 or 88888888 They don't work. In this article, we'll cover all the methods for restoring access—from checking factory settings to a full reset of the device.

Feature of cameras YiCarCam in that they create their own WiFi network (usually with a name like YiCarCam_XXXX or Yi_DashCam_XXXX), the password for which is entered manually upon first connection. If you haven't changed it, there's a good chance the network is protected by a default password. But even if the password has been changed, it can be restored without losing your records—the key is to follow the steps correctly.

YiCarCam Default Passwords: A Complete List

Manufacturer Yi Technology uses a limited set of factory passwords for its devices. Before resetting the camera, check these combinations:

• 🔐 12345678 — the most common option for models YiCarCam 1080p And YiCarCam 2K.
• 🔐 88888888 — alternative standard password for the series Yi Dash Camera.
• 🔐 yicarcam (lowercase) - used in 2022-2023 firmware.
• 🔐 adminadmin — found on cameras supplied to Europe.
• 🔐 The last 8 digits of the serial number (indicated on the case or packaging).

If none of the combinations work, the password was changed manually. In this case, the only solution is to reset the settings or connect to the camera via a microSD card (more on this below).

Where can I find the password in the Yi Action DashCam app?

Official app Yi Action DashCam (available for Android And iOS) stores data about connected devices, including WiFi passwords. To find them:

1. Open the app and go to the section Devices (or My Devices).
2. Select your camera from the list.
3. Click on the ⚙️ icon (Settings) → WiFi Settings.
4. Field Password may be hidden by stars - click the eye icon (👁️) to reveal the password.

If the app didn't save your password (for example, after a reinstallation), try restoring it from a backup. To do this:

• 📱 Go to Profile → Settings → Backup.
• 🔄 Select the latest backup and restore your data.

⚠️ Attention: Application Yi Action DashCam may reset saved passwords after an update. If you've recently updated the software, try connecting to the camera via Guest mode (if supported by your model).

How to reset the WiFi password on YiCarCam using the camera menu

If the default passwords don't work and the app didn't save any data, you can reset the network settings directly on the camera. To do this:

Turn on the camera and wait for it to load|Go to Settings → WiFi|Choose Reset password or Reset WiFi|Confirm the action with the button OK|Reboot the camera (turn it off/on)

-->

After reset, the camera will create a new network with factory password (see list above). If there is no item in the menu Reset password, perform a full reset:

1. Press and hold the button MODE (or SET) for 10-15 seconds until you hear a beep.
2. The camera will reboot and return to factory settings, including the WiFi name and password.

⚠️ Important: A full reset deletes all recordings from the memory card. If you need to save videos, first remove the microSD card and copy the files to your computer.

What to do if the camera does not reset?

If after holding the button MODE nothing happens:

1. Connect the camera to the charger (there may not be enough power).

2. Try holding the button POWER + MODE simultaneously.

3. For models with a battery, remove the battery for 30 seconds, then try again.

Alternative ways to connect to YiCarCam without a password

If resetting doesn't help or you don't want to lose your settings, try these methods:

To connect via USB:

1. Connect the camera to the computer with a cable.
2. Open This computer → find the device YiCarCam.
3. Check the files config.ini, settings.dat or wifi.cfg through Notebook. Search for lines ssid= And password=.

⚠️ Attention: Configuration files may be encrypted. If you see unreadable characters, try opening the file in HxD (hex editor) and find ASCII strings with the password.

Common errors when connecting to YiCarCam WiFi

Even with the correct password, a connection may fail. Let's look at common issues and their solutions:

• 📶 Network not detected: Make sure the camera is turned on and in WiFi mode (the indicator light should be blinking) blue). On some models, you need to manually activate distribution in the menu.
• 🔌 Constantly asks for password: Delete the network YiCarCam_XXXX from those saved on your phone and reconnect. Android this is done in Settings → WiFi → Saved Networks.
• ⚡ The connection is broken: Disable mobile internet on your phone—IP address conflicts can interrupt connection.
• 📱 The app doesn't see the camera: Update Yi Action DashCam to the latest version or try alternative software, for example DashCam Viewer.

If the camera gives an error WiFi Error or Connection Failed, execute:

1. Turn off the camera.
2. Remove the memory card and battery (if removable) for 1 minute.
3. Turn on the camera and try connecting again.

How to change the WiFi password on YiCarCam after a reset

After restoring access, we recommend setting a new password to avoid recurring problems. To do this:

1. Connect to the camera network with the factory password.
2. Open the app Yi Action DashCam and go to Settings → WiFi.
3. Select Change Password (or Change password).
4. Enter a new combination (at least 8 characters, preferably with numbers and letters).
5. Save your changes and reconnect to the network.

Tips for choosing a password:

• 🔒 Don't use simple sequences (11111111, qwertyui).
• 🔒 Add special characters (!, #, $), if the camera supports them.
• 🔒 Write down the password in a safe place (for example, in Google Keep or 1Password).

⚠️ Attention: Some models YiCarCam Passwords are limited to 12 characters. If you enter a longer combination, the camera will truncate it automatically.

Updating the firmware as a way to solve WiFi problems

If resetting and using default passwords don't help, the problem may be outdated camera firmware. Updating the firmware often fixes connection issues. To do this:

1. Download the latest firmware for your model from Yi Technology official website (select section Dash Camera).
2. Unzip the archive and copy the firmware file (usually with the extension .bin) to the root of the microSD card.
3. Insert the card into the camera and turn it on. The update will start automatically (the indicator will be lit). red).
4. After rebooting, check your WiFi connection.

Important nuances:

• 🔄 Use a microSD card no larger than 32GB, formatted in FAT32.
• 🔋 Make sure the camera is charged to at least 50% or connected to a power source.
• ⏳ Do not turn off your device during the update (the process takes 2-5 minutes).

⚠️ Attention: The update process details may vary depending on the model. Always refer to the instructions included with your specific firmware.

FAQ: Frequently asked questions about the WiFi password on YiCarCam

Is it possible to connect to YiCarCam without a password?

No, all models YiCarCam protect their WiFi network with a default password. However, some firmware versions allow you to temporarily activate Guest mode (without a password) through the camera menu. To do this, go to Settings → WiFi → Guest Mode and turn on the option for 5-10 minutes.

The camera won't create a WiFi network. What should I do?

The reasons may be different:

• 🔋 The battery is low - connect the camera to a charger.
• 📡 The WiFi module is damaged - try resetting the settings (see the section above).
• 🔄 Outdated firmware - update the software (instructions in the article).

If nothing helps, contact support Yi Technology indicating the model and serial number.

How do I reset my password if my camera won't turn on?

If the camera does not respond to buttons, try:

1. Connect it to the charger for 30 minutes (the battery may be completely discharged).
2. Press and hold the button RESET (if any) for 20 seconds with a thin object.
3. If the camera still does not turn on, the problem may be a hardware failure.

Can YiCarCam be used as a WiFi repeater?

No, cameras. YiCarCam They don't support repeater mode. They only create their own network for connecting a smartphone. For internet distribution in a car, it's better to use specialized 4G routers, such as TP-Link M7350.

Where can I find the camera's serial number to contact support?

Serial number (S/N) specified:

• 📦 On the box (usually on a sticker with a barcode).
• 📱 In the camera menu: Settings → Device Information.
• 💾 On the camera itself (under the battery or on the back panel).