How to access Xiaomi router settings: all methods (including MiWiFi)

Routers Xiaomi — are among the most popular devices for setting up a home Wi-Fi network thanks to their combination of price, performance, and easy management. However, many users encounter difficulties even when logging into the admin panel. Without access to the web interface, it's impossible to change the Wi-Fi password, set up a guest network, or update the firmware. In this article, we'll discuss all current login methods in routers Xiaomi (including models Mi Router 4A, AX3000, AX6000 and others), and we will also solve typical authorization problems.

It is important to understand that the login process may differ depending on the firmware version (MiWiFi or OpenWRT), router model, and even region of purchase. We've taken into account every detail to ensure the instructions are suitable for most scenarios. If you're setting up your router for the first time or encountering the "Incorrect Password" error, you'll find the solution here.

1. Preparing for entry: what you need to know before you begin

Before attempting to log into the control panel, please ensure the following basic requirements are met:

• 🔌 Router Xiaomi connected to a power source and turned on (power indicator is on or flashing).
• 📡 Your device (PC, laptop, smartphone) is connected to the router via Wi-Fi or Ethernet cable.
• 🌐 VPN, proxy, and ad-blocking extensions are disabled in the browser (they may interfere with the panel loading).
• 🔄 If the router is new, wait until the first setup is complete (the indicator will stop flashing orange).

Pay special attention connection methodIf you are using Wi-Fi, make sure you are connected to the router's network. Xiaomi, and not to a repeater or a neighboring access point. For reliability, it's better to use Ethernet cable - This will eliminate authorization problems due to an unstable wireless connection.

⚠️ Attention: If the router was purchased on AliExpress Or in a Chinese store, its firmware may be in Chinese. In this case, you'll need to change the region to "Global" through the mobile app before logging in. Mi WiFi (instructions in section 4).

2. Standard login method via IP address

The main method for entering router settings Xiaomi - usage IP addresses in the browser address bar. By default for most models (Mi Router 4A, 4C, AC2100, AX3000) the address used is:

192.168.31.1

Algorithm of actions:

1. Open any browser (Chrome, Firefox, Edge - doesn't matter).
2. Enter in the address bar 192.168.31.1 and press Enter.
3. Wait for the authorization page to load (it may take 10-30 seconds).
4. Enter your login and password (by default, see the table below).

If the page does not load, check:

• 🔗 Make sure the IP address you entered is correct (a common mistake is a typo in the last digit).
• 🖥️ Connect to the router (run in the command line ping 192.168.31.1 - there should be answers).
• 🔄 Reboot the router (turn off the power for 30 seconds and turn it on again).

Is the Ethernet cable connected to the router and PC?

Are VPN/proxy disabled in your browser?

Is the IP address entered correctly (192.168.31.1)?

Was the router rebooted after the latest changes?

3. Login via the Mi WiFi app (for smartphones)

Company Xiaomi developed an official mobile application Mi WiFi, which duplicates the functionality of the web interface and is often more convenient for basic setup. The application is available for Android And iOS, but has limitations:

• 📱 Does not support all models (for example, AX6000 may require a web version).
• 🌍 In some regions, the app only works with Chinese firmware.
• 🔒 For full access, you may need to link your account Xiaomi.

Step-by-step instructions:

1. Download Mi WiFi from Google Play or App Store.
2. Connect your smartphone to the router's network Xiaomi.
3. Open the app and select your router from the list.
4. Enter your Wi-Fi password (or the factory password from the sticker).
5. Confirm your login via SMS or account Xiaomi (if required).

If the application does not find the router:

• 📶 Make sure your smartphone is connected to the network Xiaomi (and not to the mobile Internet).
• 🔄 Restart the app and router.
• 📲 Check app permissions (network and location access).

⚠️ Attention: In the attachment Mi WiFi some avanzados settings (for example, Port Forwarding or VLAN) may be hidden. Changing them will still require the web interface.

Via web interface (browser)|

Via mobile app|

Both options|

I don't configure it myself-->

4. Troubleshooting login issues: errors and their causes

If you entered your IP address and password correctly but still can't log in, one of the following errors may be the cause:

Critical Information: If the router Xiaomi AX6000 or BE7000 requires authorization through an account Xiaomi, but you haven't gone through it, the only way to bypass this is a factory reset followed by setup through the app Mi WiFi on a smartphone.

If none of the methods worked, do the following: hard reset:

1. Find the button on the back of the router. Reset (usually recessed into the body).
2. Take a paper clip or a toothpick and press and hold the button 10-15 seconds.
3. Wait until all the indicators go out and the router reboots.
4. Try logging in again with factory data (admin/admin).

What should I do if the router doesn't turn on after a reset?

If after a hard reset the router Xiaomi If the power button doesn't respond or none of the indicators light up, this could indicate a hardware failure in the power supply or memory chip. In this case:

1. Check the power supply (try another adapter with similar characteristics).

2. Make sure the button Reset did not jam in the pressed position.

3. If the router is under warranty, contact the service center. For older models (Mi Router 3 and earlier) repair is possible by reflashing through UART, but this requires special equipment.

5. Alternative login methods (for advanced users)

If standard methods don't work, you can try alternative options:

Method 1: Using a domain name miwifi.com

Instead of the IP address, enter the following in your browser:

http://miwifi.com

This address will automatically redirect you to the router's local IP. Works for most models, except AX6000 and newer.

Method 2: Find IP via command line

If you don't know your router's IP address, find it using the command:

• 🪟 For Windows:

  ipconfig | findstr"Default Gateway"

  The IP you are looking for will be in the "Default gateway" line.

• 🐧 For Mac/Linux:

  netstat -rn | grep default

Method 3: Connecting via Telnet/SSH (for OpenWRT firmware)

If your router has custom firmware installed (OpenWRT, Padavan), entry is possible through SSH:

ssh admin@192.168.31.1

Default password for OpenWRT usually empty or specified during firmware installation.

⚠️ Caution: Use Telnet/SSH Requires command line knowledge. Incorrect commands may result in loss of access to the router!

6. Configuring the router after successful login

After logging in, you'll be taken to the control panel. Here are the key sections you should check first:

• 🔐 Security: Change the administrator password in Settings → Device ManagementUse a complex password (at least 8 characters with numbers and letters).
• 📶 Wi-Fi: IN Settings → Wi-Fi set up a network name (SSID), password and channel (recommended) 5 GHz for speed or 2.4 GHz for range).
• 🌍 Internet: IN Settings → Internet check the connection type (PPPoE, Dynamic IP or Static IP) - it must match the requirements of your provider.
• 🔄 Update: IN Settings → Firmware Update Check that your software is up to date. For stability, it's best to disable automatic updates.

For models with support Mesh (AX3000, AX6000) in the section Settings → Mesh Mode It is possible to combine several routers into one network.

7. Frequently asked questions and errors when logging into a Xiaomi router

Let's look at typical situations that users encounter:

🔹 Why does my Xiaomi router ask for my Xiaomi account login and password?

This requirement has appeared in new models (AX6000, BE7000) for increased security. If you haven't linked your router to an account before, you have two options:

1. Reset the router to factory settings and connect it via the app Mi WiFi.
2. Use the web interface to log in with your Wi-Fi password (if supported by your firmware).

If the router was purchased used, ask the previous owner to unlink it from their account in the app.

🔹 How to log into a Xiaomi router if you forgot your password?

The only reliable way is to reset the settings:

1. Press and hold the button Reset on the router 10-15 seconds.
2. After rebooting, log in with factory data (admin/admin or the password from the sticker).
3. Reconfigure your router (have the internet connection details from your provider ready).

For account-linked models Xiaomi After the reset, you will need to log in via the mobile app.

🔹 Is it possible to access a Xiaomi router from a phone without an app?

Yes, for this:

1. Connect your smartphone to the Wi-Fi router.
2. Open your browser and type 192.168.31.1.
3. Select the "For PC" mode (if the site offers a mobile version).
4. Enter your login and password.

On iPhone you may need to use a browser Safari in horizontal orientation for correct display of the interface.

🔹 Why are all the text in Chinese after logging into my Xiaomi router?

This means the router has Chinese firmware installed. Solutions:

• Change the region to "Global" through the application Mi WiFi (chapter Settings → Region).
• Update the firmware to the international version manually (firmware files can be found on the forum 4PDA).
• Install custom firmware (OpenWRT or Padavan), but this will void the warranty.

For models AX3000 and newer, changing the region may require creating an account Xiaomi with a Chinese phone number.

🔹 How do I find out the model of my Xiaomi router?

The model is indicated:

• On a sticker on the bottom or back panel of the router.
• In the web interface in the section Status → Device Information.
• In the mobile app Mi WiFi on the main screen.

If the sticker has worn off, the model can be identified by its appearance (for example, Mi Router 4A has a white body with blue accents, and AX6000 - black with hexagonal ventilation holes).

8. Additional safety tips

After successfully logging into the router Xiaomi It is recommended that you take several steps to protect your network:

• 🔒 Change the administrator passwordUse a unique password (not the same as your Wi-Fi password). An example of a strong password: X7#pL9!k2@Qm.
• 🔄 Disable remote control: In the section Settings → Remote Access Disable this option if you do not plan to manage your router from the outside.
• 📡 Set up a guest network: IN Settings → Wi-Fi → Guest Network Create a separate access point for guests with limited access to the local network.
• 🛡️ Enable DDoS protection: In new firmware (AX6000 and newer) there is built-in protection in the section Security → Attack Protection.

For models with support IoT (For example, AX3000) check the settings Smart home - by default some devices Xiaomi (lamps, sensors) may have priority access to the network, which reduces the speed for other devices.

If you use your router in an office or public place, consider disabling the features. UPnP (in the section Settings → NAT), as they may be vulnerable to hacker attacks.