How to Connect the Xiaomi Mi LED Desk Lamp 1S to Wi-Fi: A Complete Guide with Troubleshooting

Desk lamp Xiaomi Mi LED Desk Lamp 1S It's not just a light source, but a fully-fledged smart home device that can be controlled from a smartphone, schedule lighting scenarios, and integrate with voice assistants. However, many users encounter difficulties already when connecting to Wi-Fi: the lamp doesn't find the network, the app Mi Home throws an error, or the device keeps turning off. In this article, we'll look at all connection methods, typical problems and their solutions - from basic setup to the subtle nuances of working with the protocol Zigbee (if you are using a gateway Xiaomi Gateway).

It is important to understand that the connection process Mi LED Desk Lamp 1S differs from the standard light bulb setting Yeelight or other devices XiaomiThere are some peculiarities here: from requirements for the firmware version to restrictions on regional servers in Mi HomeWe tested all methods on current software versions (2026) and collected checklist for a successful connection — even if you have no experience with smart gadgets.

1. What do you need to connect the Xiaomi Mi LED Desk Lamp 1S to Wi-Fi?

Before you begin setup, make sure you have everything you need. Without these components, the connection will be impossible or will fail.

• 📱 Android/iOS smartphone with the application installed Mi Home (version not lower than 6.5.400 for Android or 6.5.300 for iOS). Older versions may not support Mi LED Desk Lamp 1S.
• 🌐 Wi-Fi router with frequency 2.4 GHz. Lamp doesn't work on frequency 5 GHz! If your router supports both frequencies, make sure the network 2.4 GHz enabled and has a separate name (SSID).
• ⚡ Charger with an exit 5V/1A or 5V/2AConnecting the lamp to a computer's USB port is not recommended, as it may not provide enough power.
• 🔄 Xiaomi Account (Mi Account). Without it, it's impossible to link the lamp to the app. If you don't have an account, register one in advance on the website. account.xiaomi.com.

Also check that your router is not using MAC address filtering or other access restrictions. Some router models (for example, ASUS RT-AC68U) block new devices by default - this setting should be disabled temporarily.

⚠️ Attention: If you use Xiaomi Gateway (smart home gateway), the lamp can be connected via Zigbee Without Wi-Fi. However, in this case, some functions (such as remote control via the internet) will be unavailable.

Install the Mi Home app (update to the latest version)|

Connect the lamp to a 220V network (not via USB!)|

Make sure your router is distributing Wi-Fi at 2.4 GHz|

Disable VPN and firewall on your smartphone|

Register a Mi Account (if you haven't already)

-->

2. Step-by-step instructions: connecting via the Mi Home app

The most reliable way to connect Mi LED Desk Lamp 1S - use the official app Mi HomeFollow the instructions carefully, as skipping steps often leads to errors.

1. Turn on the lamp into the socket. It should flash white once—this indicates it's ready to pair. If the lamp doesn't respond, press and hold the touch button on the body for 5 seconds, until you see blinking.

2. Open Mi Home and log in. Go to the tab Devices (at the bottom of the screen) and press Add a device (icon + in the upper right corner).

3. Select a category Lighting, then find it in the list Xiaomi Mi LED Desk Lamp 1SIf the model is not listed, please update the app or select Other device → Manual search.

4. Confirm the lamp blinkingThe app will ask you to tap the light to make it blink. Do so. once - If you press it several times, the pairing process will be reset.

5. Select a Wi-Fi network. Specify your network 2.4 GHz and enter the password. Make sure your smartphone is connected to the same network! If you are using guest Wi-Fi or networks with captive portal (as in hotels), the connection will not be possible.

6. Wait for it to completeThe lamp will blink. green (success) or red (error). If the process is stuck at the stage Connecting to the network more 2 minutes, restart the setup.

After successful connection, the lamp will appear in the list of devices in Mi HomeNow you can rename it, add it to a room, or set up automations.

3. Common mistakes and their solutions

Even if you follow the instructions exactly, the connection may fail. We have collected top 5 mistakes and ways to fix them, based on user feedback and testing.

If none of the methods helped, try Change the region in Mi HomeTo do this:

1. In the app, go to Profile → Settings → Region.
2. Select China (Mainland China) or Singapore.
3. Restart the application and try connecting again.

⚠️ Attention: Changing the region may result in loss of access to other Xiaomi devices linked to a different server. After setting up the lamp, return it to the previous region.

4. Alternative connection methods

If the standard method is through Mi Home If it doesn't work, you can try alternative options. They're less reliable, but sometimes help in difficult cases.

Method 1: Connecting via Xiaomi Gateway (Zigbee)

If you have a gateway Xiaomi Gateway (For example, Mi Smart Home Gateway 3), the lamp can be connected via protocol Zigbee:

1. Add a gateway to Mi Home (if not added yet).
2. Put the lamp into pairing mode (hold the button 5 sec before blinking).
3. In the application, select Add a device → Via gateway and follow the instructions.

The downside of this method: without Wi-Fi, you won't be able to control the lamp remotely (for example, from another network).

Method 2: Using third-party applications

Some users connect successfully Mi LED Desk Lamp 1S through apps like Home Assistant or IoT Mi ControllerHowever, this requires:

• 🔧 Skills in working with API And access tokens.
• 📡 Stable local connection to the lamp (without Xiaomi cloud).
• 🔒 Possible warranty breach (if you use unofficial firmware).

light:
- platform: xiaomi_miio
name: "Mi Desk Lamp 1S"
host: IP_ADDRESS_OF_LAMP
token: YOUR_TOKEN

Method 3: Connect via Google Home or Apple HomeKit

Xiaomi Mi LED Desk Lamp 1S officially does not support Google Home or HomeKit, but there are workarounds:

1. Connect the lamp to Mi Home (as described above).
2. IN Mi Home Go to lamp settings → Smart assistant → Google Assistant.
3. Log in with your Google account and allow access.

Now you can control the lamp with your voice through Google Assistant (for example, "Okay Google, turn on the desk lamp"). For HomeKit additional software will be required like HomeBridge.

5. Setting up smart control after connection

Once the lamp is successfully connected to Wi-Fi, you can set up automation, scheduling, and voice controlHere's what's available out of the box:

• ⏰ Schedule: turn on/off by time (for example, simulating presence at home).
• 🌡️ Scenarios: communication with other Xiaomi devices (for example, the lamp turns on when movement is detected by the sensor).
• 🎨 Lighting modes: select color temperature (2700K–6500K) and brightness (1–100%).
• 🔊 Voice control: through Alice (Yandex), Google Assistant or Siri (with HomeBridge).

To set up a schedule:

1. Open the lamp in Mi Home → Automation → Add.
2. Select Schedule and specify the time (for example, 18:00).
3. Set the action: Turn on, brightness 70%, temperature 4000K.
4. Save the rule.

To create a scenario (for example, "Morning"):

1. IN Mi Home go to Scenarios → Add.
2. Select a trigger (eg. Time or Motion sensor).
3. Add an action: turn on the lamp with the specified parameters.
4. Link the script to the voice (optional).

6. Compatibility with other smart home systems

Xiaomi Mi LED Desk Lamp 1S officially works only with the ecosystem Xiaomi/Mijia, but it can be integrated into other platforms using workarounds. Let's look at the main options:

To integrate with Home Assistant follow these steps:

1. Get it token for your Mi Account (for example, through this tool).
2. Add to configuration.yaml:

   light:
   - platform: xiaomi_miio
   name: "Xiaomi Desk Lamp 1S"
   host: IP_LAMPS
   token: YOUR_TOKEN
   model: philips.lamp.ceiling

3. Restart Home Assistant.

If the lamp is not detected, try specifying a different model in the parameter model, For example yeelight.lamp1.

⚠️ Attention: When using unofficial integrations (such as HomeBridge), there's a risk of your Xiaomi account being blocked for "suspicious activity." To avoid this, avoid making too many API requests in a short period of time.

7. Firmware update and reset

If the lamp is unstable (turns off on its own, doesn't respond to commands), the cause may be outdated firmware. You can update it via Mi Home:

1. Open the lamp card in the app.
2. Go to Settings (gear in the upper right corner).
3. Select Firmware update (if available).
4. Confirm the update and wait for it to complete (the light will flash) blue).

If the lamp is stuck or does not respond to reset, follow these steps: hard reset:

1. Disconnect the lamp from the power supply.
2. Press and hold the touch button while connecting the lamp to the power supply.
3. Hold the button 15–20 secondsuntil the lamp blinks 3 times white.
4. Release the button and the lamp will reset to factory settings.

After the reset, all settings and account links will be deleted. You'll have to start the Wi-Fi connection process again from scratch.

8. Frequently Asked Questions (FAQ)