Modern technologies allow you to do away with tangled wires and bulky desktop computers when working with office equipment. HP DeskJet 2710 It's a compact home solution that easily integrates into a wireless network. Users often encounter difficulties during initial driver installation, but mobile setup significantly simplifies this process.
To get started, you will need a smartphone running Android or iOS with internet access. Wireless connection Not only does it print documents, but it also scans directly to a mobile device. It's important to have your local network login details ready in advance to ensure the process runs smoothly and without delays.
The process of activating the pairing mode on the device starts automatically when it is turned on for the first time, as indicated by a flashing indicator.
If the printer has already been used before, you need to reset the network settings by holding down the wireless button and the cancel button simultaneously for a few seconds.
After this, the power indicator will start flashing blue, indicating that it is ready to search for a new router.
Preparing equipment and network
Before you begin setup, make sure your router is working properly and transmitting a signal at a frequency of 2.4 GHz, as most budget printer models do not support the 5 GHz standard.
Place your smartphone and printer close to the access point to ensure a stable signal while transferring configuration files.
Check that the modules are enabled on your phone Bluetooth and geolocation, as modern applications use this data to quickly detect the periphery.
⚠️ Warning: If your router uses a hidden SSID or MAC address filtering, the standard automatic detection procedure may not work without manually adjusting the security settings.
Make sure the cartridges are installed correctly and the protective tapes are removed, otherwise the printer may go into standby mode and not respond to network requests.
☑️ Check before setup
Using the HP Smart app
The main tool for managing the device is a specialized application HP Smart, available in the official Google Play and App Store.
After installing the program, you will need to create an HP account or sign in to an existing account, which is required to activate advanced printing features.
Click the add new printer button or the plus sign in the corner of the screen, and an automatic search for available devices within range will begin.
When the system detects the model DeskJet 2700 series, select it from the list to launch the setup wizard.
The app automatically transfers saved Wi-Fi router passwords to the printer, eliminating the need for the user to manually enter complex character combinations.
During the installation process, you may be asked to confirm the pairing via Bluetooth, which requires you to allow access to your location in a pop-up window.
Wait for the process to complete, which may take several minutes, during which time the indicators on the case will change their state.
Alternative Method: Wi-Fi Direct
If connecting to your home network is impossible or your router is temporarily unavailable, you can use the technology Wi-Fi Direct.
This mode allows you to create a direct connection between your phone and printer without using a router, which is useful for printing documents when visiting or at the office.
To activate the function, press the wireless button on the device panel until the direct connection indicator lights up.
Press the information button (i) next to the power button to print a page with the current settings and connection password.
In the list of available networks on your smartphone, find the name that starts with HP-Setup-DeskJet-2710 or similar, and enter the password indicated on the printed sheet.
After successful pairing, the phone will see the printer as a network device, even if the Internet on the phone itself does not work through this network.
Features of Direct mode
In Wi-Fi Direct mode, data transfer speeds may be lower than through a full-fledged router, and the Internet on the connected phone may temporarily disappear if it does not support two Wi-Fi connections simultaneously.
Setup via WPS (Push Button)
Many modern routers support the technology WPS, which allows you to connect devices by pressing a physical button.
Press and hold the wireless button on the printer for 3 seconds until the light starts flashing.
Within two minutes, press the WPS button on your router; the devices will find each other and exchange encryption keys automatically.
This method is especially useful if you don't know your Wi-Fi password or it's too complex to enter manually.
A successful connection will be confirmed by the blue wireless indicator on the control panel being continuously lit.
| Indicator | State | Meaning |
|---|---|---|
| Wireless communication | Flashing blue | Setup Mode / Network Search |
| Wireless communication | It's blue | Connected to Wi-Fi |
| Wireless communication | Flashing orange | Connection error / No signal |
| Wi-Fi Direct | It's blue | Direct connection mode is active |
Solving common problems
Users often encounter a situation where the printer is not visible in the list of available devices during a search.
In this case, it is recommended to reboot the router and the printing device, and also make sure that Incognito mode or ad blockers are not enabled on the phone, which may interfere with the operation of the application.
If the error persists, try temporarily disabling mobile internet (3G/4G/5G) on your smartphone, leaving only the Wi-Fi module active.
⚠️ Important: Make sure that AP (Client Isolation) is not enabled on your router, as this feature prevents devices within the same network from communicating with each other.
Check to see if your router has reached its maximum number of connected devices, which sometimes happens in densely populated apartment buildings.
For 2700 series models, it is also important to update the firmware via a USB cable if the wireless modules are not working correctly.
Printing and scanning from mobile devices
Once the drivers are successfully installed and the network is configured, you can print documents directly from the gallery or office applications.
Function HP Smart allows you not only to print, but also to scan documents, saving them directly to cloud storage or phone memory.
Select the desired file, click "Share" or "Print", select your printer from the list and configure the paper and quality settings.
The application supports printing photos, web pages and emails without the need to save the files first.
To scan, open the app, select "Scan," and the device will automatically pick up the image from the flatbed scanner.
Frequently Asked Questions (FAQ)
Can HP DeskJet 2710 connect to a 5GHz network?
No, this model only supports the 2.4 GHz wireless standard. Make sure your router broadcasts on this frequency, or separate the frequencies in your router settings.
What should I do if the indicator keeps flashing after setting?
A flashing blue light indicates the printer is in setup mode and is not connected to the network. Check the Wi-Fi password entered correctly and repeat the pairing process through the app.
Do I need a USB cable for initial setup?
A USB cable is not required or even supported for setting up Wi-Fi on this model. The entire configuration process is done entirely wirelessly via a smartphone.
How do I print a quality check page?
To do this, press and hold the Information (i) button on the printer control panel for 3 seconds until the machine starts printing a status report.