Modern office equipment requires flexibility in use, and HP Laser 135w is no exception. This compact laser printer can significantly increase productivity by eliminating the need to tether it to a single computer via USB cable. The wireless connection allows you to print documents directly from your smartphone or laptop, located anywhere in your home or office.
Setup process wireless interface This may seem complicated at first glance. In fact, the manufacturer has provided several connection scenarios so you can choose the most convenient option. In this article, we'll walk you through each step in detail so you can quickly start enjoying all the features of your device.
Before you begin, make sure your router is working properly and the printer is connected to the network and ready to use. It's important to understand that signal stability Directly affects data transfer speed and print quality of large documents. If you've just unpacked the device, allow it to warm up after turning it on.
Equipment preparation and compatibility testing
The first step is to check the physical condition of the device and its components. Ensure the cartridge is installed correctly and the protective tape is removed from all internal mechanisms. For wireless operation, it is critical that the printer's control panel responds to inputs and the indicator lights are illuminated normally.
Particular attention should be paid to the network infrastructure. Printer HP Laser 135w Supports Wi-Fi 802.11b/g/n standards, meaning it's compatible with most modern routers. However, there are some frequency nuances: the device operates exclusively in the range 2.4 GHz.
- 📡 Make sure your router is broadcasting a 2.4GHz network (many dual-band routers hide this name by default or combine it with 5GHz).
- 🔌 Make sure the printer is within a strong signal range, ideally no further than 5-7 meters from the router during setup.
- 💻 Prepare a computer or smartphone through which the initial configuration will be performed.
⚠️ Note: If you have a router with a "Smart Connect" feature or similar, which combines 2.4 and 5 GHz networks under one name, if problems arise, try temporarily separating them in the router settings or creating a guest network with only 2.4 GHz.
It's also a good idea to know your Wi-Fi network password in advance if it's not stored on your device. Entering complex passwords with character combinations through the printer's keypad can be difficult, so using a PC or mobile app is preferable in this case.
Resetting the printer's network settings
If the device was previously used on a different network or you bought it second-hand, you need to clear the current configurations. This ensures that the old ones connection profiles will not conflict with new authorization attempts. A reset returns the network module to its factory default state.
To perform this procedure on the control panel HP Laser 135w You need to find the wireless button. It's usually marked with an antenna icon or a Wi-Fi symbol. Pressing and holding this button for a few seconds initiates the network adapter reboot process.
Reset indication
After the reset, the wireless indicator will begin flashing blue, indicating that the device is in network search mode or access point mode. If the indicator is solid blue, a connection has been established; if it's orange, the module is disabled or there's an error.
After resetting, the printer may enter direct connection mode or begin searching for the last known network. Your task is to wait until the indicators begin flashing in a specific pattern, indicating readiness for a new setup. This is the key moment to begin the pairing process.
WPS method: quick connection without password
The easiest way to connect printer and router One way to do this is to use WPS (Wi-Fi Protected Setup). This method eliminates the need to manually enter a password, which is especially convenient if you have a complex security key. However, your router must support this feature.
Find the WPS button on your router. It may be a physical button or a software button in the router's web interface. Press it, then press and hold the wireless button on the printer's panel within two minutes. HP Laser 135w until the indicator starts flashing.
☑️ WPS Connection Checklist
The device will automatically exchange encryption keys, and within a minute or two, the Wi-Fi indicator on the printer should turn solid blue. This means that IP address received successfully and the device is ready to work in the local network.
Setup via the HP Smart app
A more universal and modern method is to use a proprietary application. HP SmartThis method is suitable for Windows and macOS, as well as iOS and Android mobile platforms. The app automatically detects the printer on the local network and guides you through all the registration and setup steps.
First, you need to download and install the app from the manufacturer's official website or from your smartphone's app store. Once launched, the program will prompt you to create an HP account or sign in to an existing one. This is necessary to access advanced features and battery level monitoring. toner.
Next, tap the "Add Printer" button or the plus sign. The app will begin searching for devices. If the printer is already connected to the same Wi-Fi network as your phone, it will appear in the list. If not, the app will prompt you to set up a new device and request the Wi-Fi password.
| Setup stage | User action | System response |
|---|---|---|
| Search | Clicking "Add Printer" | Scanning the local network |
| Choice | Click on the HP Laser 135w model | Go to the configuration window |
| Authorization | Entering the Wi-Fi password | Transferring data to the printer |
| Conclusion | Expectation | Driver installation and status "Ready" |
During the setup process, the application may prompt you to update firmware printer. It is strongly recommended to agree to this action, as new software versions often contain wireless module bug fixes and improve connection stability.
Manual wireless menu setup
If automatic methods don't work, you can manually enter the settings through the control panel. This method requires careful attention, as navigation is limited to just a few buttons. You'll need to access the network settings menu.
Using the navigation buttons, find "Network" or "Wireless." In the submenu that opens, select "Wireless Setup Wizard." The printer will begin scanning the airwaves for available networks.
Select your network name from the list. If prompted, enter the password using the navigation buttons to select characters. This may take a while, but this method provides a direct connection without intermediaries. After entering the password, the printer will attempt to establish a connection.
⚠️ Important: When manually entering a password, pay close attention to the capitalization. A single character error will result in connection failure, and the printer may not display a clear error message, simply returning to the menu.
Installing drivers on a computer
After successfully connecting the printer to your Wi-Fi router, you need to "introduce" it to your computer. The operating system may automatically detect the device, but for full functionality, it's best to use the full driver package.
Go to the official HP support website and enter your device model. In the "Drivers" section, select your operating system. You'll be offered the "Full Driver and Software Package." Download and run the installer.
During installation, select the connection type "Wireless" or "Wi-Fi". The program will automatically find the printer on the network by its IP address and complete the installation. If the program prompts you to temporarily connect a USB cable to transfer network settings, do so, and then disconnect the cable as instructed.
After installation is complete, we recommend printing a test page. This will confirm that the computer and printer are "seeing" each other and that data is transferring correctly. You can now print from any device on the network.
Diagnostics and problem solving
Even with proper configuration, situations may arise where the printer becomes unavailable. This is often due to a change in the IP address assigned by the router or temporary glitches in communication protocols. First, check the network configuration report.
To print a report, press and hold the "Cancel" button or a combination of buttons (depending on the firmware version) until the indicators flash. The report will show the current connection status and IP address. If the address begins with 169.254.xx, the printer hasn't received an address from the router.
- 🔄 Restart your router and printer: turn off both devices, wait 30 seconds, turn on the router, wait until it fully boots up, then turn on the printer.
- 📶 Check the signal strength: if the printer is located far away, the connection quality may drop, use Wi-Fi extender if necessary.
- 🛡️ Antivirus: Sometimes the firewall on your PC blocks printer detection, try temporarily disabling it to check.
⚠️ Note: The menu interface and sequence of actions may vary slightly depending on the firmware version installed. Always check the latest documentation on the official website if the standard combinations don't work.
If all else fails, perform a full network reset as described at the beginning of this article and try the WPS method or the HP Smart app again. Often, a repeat setup procedure is more successful, as it clears up any software issues with the network module.
Frequently Asked Questions (FAQ)
Can the HP 135w be connected to a 5GHz network?
No, model HP Laser 135w The printer is equipped with a module that only operates in the 2.4 GHz band. If your router only broadcasts 5 GHz, the printer won't see the network. You need to enable 2.4 GHz broadcasting in your router settings.
The printer prints, but the computer says "Offline." What should I do?
This means the computer sees the printer but can't send data. Check if the "Use printer offline" status in the Windows print queue is set. Also, make sure the computer and printer are on the same subnet (for example, both are connected to the primary SSID, not the guest SSID).
How to find out the IP address of a printer?
The easiest way is to print a network configuration report from the printer menu (information button or report). The IP address is also displayed in the HP Smart app or in your router's device list.
Do I need to connect a USB cable to set up Wi-Fi?
Not necessarily. Modern methods using the HP Smart app or WPS allow you to set up a network without a cable. USB is only required in rare cases where automatic detection fails and you need to manually transfer network settings.
Why does my printer lose connection after being idle?
This may be related to the energy saving settings of your router or the printer itself. Try assigning a static IP address to the printer in your router settings so that its address doesn't change after waking from sleep mode.