Modern office equipment requires flexibility, and the model HP Laser 107w It became a real hit thanks to its wireless connectivity. The ability to print documents directly from a smartphone eliminates the need to find cables or connect the device to a desktop computer. This process seems simple, but users often encounter nuances that require a clear algorithm.
To successfully sync your devices, it's important to understand that the printer can't automatically find the router without prior setup. You'll need a dedicated app and the password for your wireless network. In this article, we'll walk you through the step-by-step setup process, highlighting hidden settings and common errors that occur when trying to establish a connection between an Android or iOS device and a laser printer.
Before you begin, make sure your router is working properly and your printer is powered on. Basic training 90% of success is hardware setup. If you just took the device out of the box, it will need time to initialize, so don't rush the first few button presses.
Equipment preparation and compatibility testing
The first step is to check the condition of the printer itself. Model HP Laser 107w The device is equipped with indicators that indicate its readiness for use. If the wireless indicator is blinking, it means the Wi-Fi module is active, but a connection to the router has not yet been established. In this state, the device is ready to search for a network.
It's important to ensure your smartphone and printer are within range of a strong signal. Laser printers are often installed in alcoves or closed cabinets, which can significantly weaken the signal. For the initial setup, it's best to temporarily move the device to an open area.
It's also worth checking your operating system's compatibility. Android requires version 7.0 or later, while iOS requires version 13.0 or later. If you have older OS versions, the app HP Smart may not work correctly or may not install at all.
What to do if the Wi-Fi indicator is not on?
If the wireless light on the printer's control panel is not lit or flashing, you need to reset the network settings. Press and hold the wireless button and the cancel button (the cross) simultaneously for 3 seconds. The lights should flash, indicating that the printer is in setup mode.
Installing and configuring the HP Smart app
The central control element is the official application HP SmartIt's available in the Google Play Market and Apple App Store. It's not just a driver, but a fully-featured control center that allows you to not only print but also monitor toner levels and scan documents.
After downloading and installing the app, you'll need to log in. Creating an HP Account is required to use cloud features. Without registration, the app won't allow you to add a new device to the list of available devices.
☑️ Check before launching the application
When you first launch the program, it will ask for permission to access geolocation and Bluetooth. Geolocation This permission is necessary for the app to see the list of available Wi-Fi networks and transmit their names to the printer. Without this permission, device search may fail.
⚠️ Please note: The HP Smart app interface is periodically updated by the developers. The button layout or the sequence of steps may differ slightly from the instructions described. Always pay attention to the prompts on your smartphone's screen.
Connection process via Wi-Fi Direct and Smart app
There are two main ways to establish a connection: a direct connection via Wi-Fi Direct or a classic setup via a router. We'll look at the most stable option—using an app that automatically detects the printer and offers to share network settings with it.
Open the app and tap the "+" or "Add Printer" icon. The program will begin searching for devices within Bluetooth range. When your printer's image appears on the screen, HP Laser 107w, tap it. The app will prompt you to continue setup.
- 📶 Select your home Wi-Fi network from the list provided by the app.
- 🔑 Enter the network password (if it is not filled in automatically).
- 📡 Wait until the indicator on the printer stops flashing and turns solid blue.
During the data transfer process, your phone may temporarily disconnect from the Wi-Fi router to transfer settings to the printer. This is normal. Once the process is complete, your phone will reconnect to the network, and the printer will receive its own IP address.
Setting up printing from Android devices (Mopria and HP Print Service)
For Android users, the print service is essential. It's built-in in modern versions of the operating system, but for full functionality, HP recommends installing a plugin. HP Print Service PluginIt ensures that graphic files are processed correctly before being sent.
After installing the plugin, go to your phone's settings and find the "Connections" or "Connected Devices" section. The "HP Print Service" option should be enabled in the print menu. Make sure the switch is set to "On."
| Parameter | Default value | Recommended value |
|---|---|---|
| Printing service | Disabled | Included |
| Notifications | Off | Enabled (for status) |
| Black and white printing | Auto | On (to save) |
| Double-sided printing | Off | On (if supported) |
Now when you try to print a document from any application (browser, gallery, office suite), your printer will be displayed in the list of available printers. Laser 107wIf it's not there, try refreshing the list or restarting your phone.
Printing from iPhone and iPad via AirPrint
Apple device owners are luckier: they don't need additional drivers. Technology AirPrint Built into iOS, it allows you to print directly from the Share menu. The main requirement is that your phone and printer must be connected to the same Wi-Fi network.
Open a document or photo, tap the Share button (the square with an up arrow), and scroll down to Print. Under Printer, select HP Laser 107wIf the printer is not found, check if Client Isolation is enabled on your router, which prevents devices from seeing each other.
The iOS print interface allows you to select the number of copies, page range, and page orientation. Once confirmed, the document is sent to the printer's print queue. The print status can be monitored in the iPhone's notification center.
Diagnosing problems and troubleshooting connection errors
Even with proper configuration, problems may still occur. Most often, the problem stems from a change in the router's IP address or a firmware update that resets the settings. If the printer disappears from the network, try rebooting both the router and the printer simultaneously.
Another common issue is entering the wrong Wi-Fi password during initial setup. In this case, you need to reset the network settings on the printer itself (press and hold the wireless and cancel buttons) and repeat the connection process.
⚠️ Note: If you're using a guest Wi-Fi network, your printer may not see your phone. Guest networks often isolate devices from each other for security reasons. Use your primary network for printing.
Also check whether your phone's antivirus software or router's firewall is blocking the ports needed for printing (usually port 9100). In rare cases, setting up a static IP address for the printer in the router settings can help, so the device's address doesn't change after a reboot.
The printer says "Waiting" but doesn't print.
This often happens with large files or complex graphics. Try reducing the print quality in the settings or splitting the document into sections. Also, check if a previous document is stuck in the print queue on your phone.
Frequently Asked Questions (FAQ)
Is it possible to connect the HP 107w to Wi-Fi without a computer?
Yes, it is possible. The 107w model supports Wi-Fi Direct technology and setup via the HP Smart mobile app. A computer is not required for initial setup; a smartphone with internet access is sufficient.
Why can't my phone see the printer even though Wi-Fi is on?
The most common cause is that the phone and printer are connected to different networks (for example, one on 2.4 GHz, the other on 5 GHz, or a guest network is enabled). Also, check that Bluetooth is enabled on the phone, as it is used for initial discovery.
How many devices can be connected to the printer at the same time?
Theoretically, up to five devices can be connected to the printer's wireless network simultaneously. However, for stable operation, it is recommended to actively use no more than three devices to avoid print queue conflicts.
Do I need to turn off the printer after printing?
No, HP Laser 107w The printer is equipped with an automatic sleep mode. Keeping it on all the time is even preferable, as it allows the printer to automatically calibrate and be ready to print immediately.