Modern laser printers such as HP Laser 107, often come without an Ethernet port, making wireless connection the only convenient way to integrate the device into a home or office network. Users often encounter difficulties during initial setup, as this model requires a specific approach, different from the usual USB driver installation. The main difficulty lies in the initial synchronization, which cannot be performed over the air without prior preparation.
In this article, we'll take a detailed look at all the available methods for activating the wireless module on your printer. You'll learn how to use it correctly. USB cable To transfer network settings, how to enable the function WPS for quick pairing and what nuances the software has HP SmartUnderstanding these processes will save you time and hassle when installing equipment for the first time.
Before you begin tinkering with the software, you need to make sure the router itself is working properly and is transmitting an internet signal. The printer won't be able to connect to the network if the router is hidden. SSID or uses older encryption standards that aren't supported by new hardware. Let's look at how to prepare your infrastructure for the new device.
Preparatory stage and equipment testing
The first step before setting up the printer is to physically connect it to the power supply. Make sure you're using the original power supply or a high-quality surge protector, as power surges can cause the wireless controller to malfunction. After powering on, wait for the self-test to complete, which will be indicated by a distinctive mechanical sound and a lit Ready indicator.
It's important to check the current status of the wireless module. On the control panel HP Laser 107 The button with the antenna icon is responsible for this. If the indicator light is blue, Wi-Fi is already active and the device is probably connected to a network. A blinking indicator light indicates the module is on, but no connection to the router has been established. A dark indicator light indicates the wireless interface is deactivated.
To successfully configure your network, you'll need to know the exact name and password for your network. If you're using a dual-band router that broadcasts both 2.4 GHz and 5 GHz networks, make sure you know the password for the network you plan to connect to. Budget printers often only work correctly in the 2.4 GHz band. 2.4 GHz, which is an important technical limitation.
⚠️ Important: Make sure Client Isolation is not enabled on your router. This feature prevents devices from communicating within the local network, preventing your computer from seeing the printer even after successfully connecting to Wi-Fi.
It's also worth preparing a USB-AB (printer) cable in advance, even if you plan to use it wirelessly. It will be needed for the initial transfer of Wi-Fi settings from your computer to the printer. Without this "bridge," setting up the printer from scratch over the air may be impossible for inexperienced users.
Using the HP Smart app to set up
The current standard for installing HP peripherals dictates the use of the application HP SmartThis cross-platform solution allows you to manage your device, monitor toner levels, and, most importantly, perform initial network setup. The app automatically scans your system for new devices and provides step-by-step instructions.
The process begins with downloading and installing the app from the manufacturer's official website. Once launched, the app will ask you to create an HP ID account or sign in to an existing one. This is necessary to activate advanced features and receive firmware updates. Next, click "Add a printer" and select "Search for devices."
If the printer is not yet configured, the program will offer to connect it temporarily via USB. The cable connection is critical at this stage, as it is through it that data about your Wi-Fi network (SSID and password) is transmitted. Once the data has been transferred, the cable can be disconnected and the printer will switch to wireless mode.
In some cases, the app may not find the printer automatically. In this case, you should use a manual search or select the "My printer isn't showing up" option. The system will offer several options, from which you should select "Set up a new device." Follow the on-screen prompts, carefully selecting your network from the list of available ones.
Setup via USB cable (Classic driver method)
The classic method of installing drivers from a disk or a downloaded installation package remains one of the most reliable connection methods. HP Laser 107 Wi-Fi. This method is preferred in corporate environments where precise control over installed components and network ports is required. You will need the full driver package, which can be found on the HP support website.
Run the installation file and follow the installation wizard's instructions. When choosing the connection type, select "Wireless Connection." The program will prompt you to connect a USB cable. Once the printer is detected, a network setup window will open, where you will need to select your access point and enter the password.
Unlike cloud methods, here you have the ability to manually set IP address Or check your DHCP settings. This is useful if your network uses static addresses or complex filtering rules. After successfully transferring the settings, the wizard will prompt you to remove any software you no longer need, leaving only the drivers.
☑️ USB Connection Checklist
It's important not to disconnect the USB cable until the installer confirms the wireless module has been successfully configured. Disconnecting it prematurely may interrupt the process of writing the configuration to the printer's non-volatile memory.
Connection using WPS (Wi-Fi Protected Setup)
WPS technology allows you to connect a device to a network without entering a password, simply by pressing a button on the router. This is the fastest way if your router supports this feature and it is enabled. HP Laser 107 There is also a wireless button that is involved in this process.
To use this method, press and hold the Wi-Fi button on the printer until the light starts blinking. Then, within two minutes, press the WPS button on your router. The devices will automatically exchange encryption keys, and the printer will connect to the network.
A successful connection is indicated by a steady Wi-Fi indicator on the printer's control panel. If the indicator continues to flash or goes out, pairing has failed. In this case, check whether the connection has timed out or whether the WPS function is blocked in the router's security settings.
⚠️ Note: WPS technology is considered less secure because it is vulnerable to PIN guessing. If you use WPS to connect, we recommend disabling this feature in the router's admin panel after successful setup to prevent unauthorized access to your network.
Troubleshooting and diagnostics
Even if you follow all the instructions, situations may arise where the printer doesn't detect the network or loses connection. One common cause is incompatibility with security standards. HP Laser 107 may not support legacy protocol WEP or, conversely, the latest standards WPA3 in encryption-only mode. The optimal choice is mixed WPA2/WPA3 mode or pure WPA2-AES.
Another common issue is a hidden SSID. If your network isn't broadcasting its name, the printer won't be able to connect automatically. In this case, you'll need to temporarily enable SSID broadcast in your router settings, configure the printer, and then hide the network again if necessary.
Driver issues are often resolved by completely clearing the system of old software. Use the official utility. HP Print and Scan Doctor to automatically find and fix errors. It checks print services, port status, and registry conflicts.
| Symptom | Possible cause | Solution method |
|---|---|---|
| The Wi-Fi indicator is blinking | There is no connection to the router | Check password and frequency range |
| The printer was not found on the network. | Different subnets or isolation | Check your router and firewall settings |
| Driver installation error | Blocked by antivirus | Temporarily disable protection during installation |
| Intermittent printing | Weak Wi-Fi signal | Move the printer closer to the router |
Resetting the printer's network settings
If all else fails, reset your network. Press and hold the Wi-Fi button and the Cancel button (the cross) simultaneously for 3-5 seconds. The indicators will flash, and the network settings will be reset to factory defaults.
Features of operation in the 5 GHz and 2.4 GHz ranges
Most budget laser printers, including the series Laser 107, are equipped with Wi-Fi modules that operate exclusively in the range 2.4 GHzThis is standard practice for IoT devices, providing a longer signal range through walls but a lower speed, which is still sufficient for printing documents.
If your router broadcasts the same network with the same name for both bands (Smart Connect), the printer may attempt to connect to the 5 GHz band and fail. In this case, it's recommended to separate the networks in the router settings by giving them different names, such as "HomeWiFi" and "HomeWiFi_5G."
Connect the printer to a 2.4 GHz network. Your computer can remain on a 5 GHz network—modern routers allow devices on different bands to see each other within the local network without any issues. The key is that they are on the same subnet.
Firmware update for stable operation
Manufacturers regularly release firmware updates that fix connectivity issues and add support for new security standards. HP Laser 107 Keeping the firmware up to date is critical, as older versions may not work correctly with new routers.
You can check the firmware version through the printer's web interface (EWS). To do this, enter the device's IP address in the browser's address bar. Information about the current version and a button to check for updates will be available in the "System" or "Software Update" section.
We recommend updating via a USB cable or after ensuring a stable Wi-Fi connection. Interrupting the update process may brick the device, so do not turn off the printer until the update is complete.
Why doesn't my HP 107 printer see my Wi-Fi network?
The issue is most likely related to the frequency range. Make sure your router is broadcasting a 2.4 GHz network. Also, check that the network name (SSID) doesn't use Cyrillic or special characters—printers often don't recognize such names. Try temporarily renaming the network to Latin characters.
Is it possible to connect HP Laser 107 without a computer?
Yes, this is possible using the HP Smart mobile app on your smartphone. Your phone will transfer the Wi-Fi settings to the printer. However, installing the full drivers on your PC will still require a desktop or laptop.
What is the default password for Wi-Fi Direct on HP 107?
The password is located on the printer's information sticker or printed on the configuration report. It's typically a combination of numbers and letters. To print the report, press the Continue button on the control panel.
Does the HP Laser 107 work with Mac OS?
Yes, the printer is fully compatible with macOS. Drivers are available on the HP website, or you can use AirPrint technology to print without installing additional software if the devices are on the same network.