You turned on access point on Honor 9, but the laptop stubbornly doesn't see it in the list of networks—or it sees it but won't connect? This problem is familiar to many users, especially when it comes to older, but still relevant smartphone models like Honor 9 (released in 2017). There could be a number of reasons, from trivial errors in the phone's settings to conflicts with the Wi-Fi adapter drivers on the laptop.
In this article we will look at all possible reasons, Why Honor 9 does not distribute the Internet to the laptop - from simple (for example, an incorrect network name) to complex (problems with the protocol) WPA3 or operator restrictions). You will also find step-by-step instructions for every situation, including screenshots and diagnostic commands. If you've already tried rebooting your devices, that's just the beginning: things get more interesting.
Spoiler: in 80% of cases the problem is solved in 5 minutes, but sometimes it requires firmware update or even a factory reset Honor 9 to factory settings. Let's start with the most obvious—and gradually work our way up to the rare but critical nuances.
1. Checking the basic hotspot settings on the Honor 9
Before you dig deeper, make sure that the access point is turned on correctlyOn . Honor 9 (with shell EMUI 5.1/8.0) The algorithm may differ from modern smartphones. Here's what to check:
- 📱 Network name (SSID): by default it may be hidden or contain unreadable characters (eg.
HUAWEI-XXXX). Try renaming the network toSettings → Wireless & Networks → Tethering & Hotspot → Hotspot Settings. - 🔒 Password: If you haven't changed it, it might be too complicated (eg.
1234567890ABCDEF). Set a simple password temporarily for testing purposes (for example,12345678). - 📶 Network range: Honor 9 supports only
2.4 GHzIf your laptop is searching for networks5 GHz, he simply won't see the access point. - ⏱️ Time-out: there is an option in the modem settings
Turn off when idleDisable it to keep the hotspot running all the time.
If you have changed your settings, reboot your phone — sometimes the Wi-Fi module freezes and doesn't apply new settings. Also, check the status bar Honor 9 the icon is displayed Internet distribution (two triangles connected at their vertices).
Is the access point enabled in Settings → Wireless & Network → Tethering & Hotspot?
Is the password set to a simple one (no special characters)?
Is the distribution icon visible in the top bar?
Have you tried rebooting your phone after making the changes?
-->
⚠️ Attention: On some firmware versions Honor 9 (Especially after updates) the hotspot may automatically turn off when connected to a charger. Check this manually.
2. Problems with the Wi-Fi adapter on the laptop
If Honor 9 It's distributing the network, but the laptop doesn't see it. Could that be the culprit? Wi-Fi adapter on PC. Here's what you need to do:
- 🔧 Turn on Wi-Fi: on some laptops (eg. Lenovo or HP) there is a hardware button or combination
Fn + F2/F12to turn on the module. - 🔄 Update your drivers: go to
Device Manager → Network Adapters, find your Wi-Fi module (for example,Intel Wireless-AC 9560) and update the driver via the context menu. - 📡 Check the ranges: if the adapter only supports
5 GHz, he won't see2.4 GHz-network from Honor 9. See the adapter specifications inProperties → Advanced. - 🛡️ Disable VPN/Firewall: some programs (for example, Kaspersky or Avast) block connections to "untrusted" networks.
To check if the laptop sees any networks, open the command prompt (Win + R → cmd) and enter:
netsh wlan show networks mode=bssid
If the list is empty, the problem is definitely with the adapter. If there are other networks but not your access point, Honor 9 — proceed to the next section.
| Symptom | Possible cause | Solution |
|---|---|---|
| The laptop doesn't see it not a single one networks | The Wi-Fi adapter is disabled | Turn on with the button Fn + F{number} or in Device Manager |
| Sees other networks, but not the point with Honor 9 | Range incompatibility (2.4 GHz vs 5 GHz) |
Set up your phone 2.4 GHz or update the adapter driver |
| The network is visible but does not connect. | Incorrect password or security type | Change your password to a simple one or choose WPA2-PSK in the phone settings |
3. Security protocol conflict (WPA2 vs WPA3)
Honor 9 can use by default obsolete protocol WPA2, while modern laptops try to connect via WPA3This results in the network being visible, but the connection being broken with an error. "Unable to connect to the network".
Solution:
- On Honor 9 go to
Settings → Wireless & Networks → Tethering & Hotspot → Hotspot Settings. - Find the item
Security type(orSecurity) and selectWPA2 PSK. - If there is no such option, try setting a password. exactly 8 characters (without special characters) - this sometimes avoids conflicts.
Also check on your laptop:
- 🖥️ In
Network Settings → Wi-Fi → Manage Known Networksremove the network from Honor 9 and reconnect. - 🔧 In
Adapter Properties → Securityselect encryption typeAES(and notTKIP).
⚠️ Attention: On some laptops with Windows 11 There is a bug: they do not connect to access points with WPA2, if the network name contains Cyrillic. Rename the network to Latin.
4. Mobile operator restrictions
If you are distributing the Internet with Honor 9 through mobile network (3G/4G), the operator may block the distribution. This is a common practice among MTS, Beeline And Tele2 on old tariffs. Here's how to check:
- 📵 Call the operator and check if your tariff supports it
tethering(Internet distribution). - 💳 Check your balance: Sometimes distribution is blocked due to a negative balance or exhausted traffic.
- 🔄 Change APN: go to
Settings → Wireless & networks → Mobile networks → Access point names (APNs)and compare the parameters with the official ones on the operator's website.
A critical nuance: Honor 9 with older firmware EMUI 9.0 a "hidden" limitation may be triggered Huawei — the phone blocks sharing if more than 3 devices are connected per session. This can be resolved by resetting the statistics in Settings → Apps → Tethering & Hotspot → Storage → Clear Data.
How to bypass operator blocking?
Some users solve the problem by installing an app PDANet+ or ClockworkMod Tether (root required). However, this violates operator rules and may result in your SIM card being blocked. Use at your own risk.
5. Problems with the firmware or hardware of the Honor 9
If all the previous steps did not help, the problem may lie in software or hardware phone:
- 📲 Update the firmware: go to
Settings → System → Software Updateand install the latest version EMUI For Honor 9 (current at the time of release - EMUI 9.1). - 🔧 Reset network settings:
Settings → System → Reset → Reset network settingsThis will delete all saved Wi-Fi and mobile settings. - 🔄 Check your Wi-Fi antenna: If the phone has been dropped frequently, the antenna cable may have come loose. This is determined by the fact that Honor 9 It also doesn't work well with regular nets.
To diagnose hardware, perform the test:
- Enter the code into the telephone dialer:
##2846579##. - Select
ProjectMenu → Background Settings → WLAN. - Check the status
Wi-Fi Chip. If thereError— there is a problem in the module.
⚠️ Attention: After resetting your network settings, you'll need to re-enter passwords for all Wi-Fi connections and set up your mobile data. Be sure to back up any important data beforehand.
6. Alternative methods of Internet distribution
If Wi-Fi still doesn't work, use alternative methods:
- 🔌 USB modem: connect Honor 9 connect to the laptop with a cable, turn it on
Modem mode → USB modemThis is the most stable method, but it requires drivers. HiSuite. - 🔵 Bluetooth: pair with a laptop, turn on
Modem mode → Bluetooth modemThe speed will be low (~1 Mbps), but it will be enough for instant messaging. - 📡 External Wi-Fi adapter: if the laptop does not see the network
2.4 GHz, buy a USB adapter (for example, TP-Link TL-WN725N) for 500-1000 rubles.
For USB modem On a laptop you may need:
- Install the driver HiSuite With official website.
- IN
Device Managerupdate driver forHUAWEI Mobile Connect. - IN
Network connectionsturn onLocal Area Network Connection(it will appear after connecting the phone).
7. Common mistakes and how to avoid them
Here top 5 mistakes, which users allow when setting up distribution with Honor 9:
- Airplane mode is not turned off: Even if Wi-Fi is turned on, hotspot sharing will not work in airplane mode.
- Saving traffic: V
Settings → Wireless & Network → Data Usage → Data SaverAccess point restrictions may be enabled. - IP address conflict: if the laptop and phone are on the same subnet (for example, both on
192.168.43.x), the connection is lost. Change the IP manually. - Outdated laptop firmware: on some models ASUS or Acer A BIOS update is required for proper operation.
WPA2. - Blocked by antivirus: Avast And 360 Total Security Sometimes "unknown" networks are blocked. Add the access point to the exceptions.
If nothing helps, try test scenario:
- Take another phone (for example, Xiaomi or Samsung) and try distributing Wi-Fi from it.
- If the laptop sees this network, the problem is Honor 9.
- If it doesn’t see it, the problem is in the laptop or router (if there is one on the network).
FAQ: Frequently asked questions about Wi-Fi hotspots on the Honor 9
Question: Why Honor 9 It distributes internet, but the pages don't open?
Answer: Most likely it is not configured DNSIn the connection properties on the laptop, specify DNS 8.8.8.8 (Google) or 1.1.1.1 (Cloudflare).
Question: Is it possible to distribute Wi-Fi with Honor 9 without password?
Answer: Technically yes (select Open network in the access point settings), but this is unsafe - strangers will be able to connect to your network.
Question: Why is the upload speed from my phone so slow?
Answer: Honor 9 limits upload speed to ~10 Mbps. Also, check if data saving is enabled in your SIM card settings.
Question: The laptop connects to the access point, but says "No Internet access".
Answer: Check if data transfer is enabled on your phone (Settings → Mobile network → Data transfer). Also try disabling the VPN on your laptop.
Question: After the update EMUI Wi-Fi hotspot stopped working. What should I do?
Answer: Reset network settings (Settings → System → Reset → Reset network settings) or roll back the firmware to the previous version (if you have a backup).