Why my Honor phone won't connect to my TV via Wi-Fi: A full breakdown of the issues and solutions

You are trying to stream video from Honor 9X, Honor 50 Or another model, but the TV stubbornly refuses to detect the phone via Wi-Fi? Or the connection drops after 10 seconds? This problem is familiar to many users, according to service center statistics. 37% of requests wireless connection of phones to TV is connected specifically to devices Honor And HuaweiThe reasons lie in both software conflicts and hardware limitations.

In this article we will look at all possible scenarios: from trivial errors in settings to hidden firmware limitations EMUI/Magic UIYou will learn how the connection differs through Wi-Fi Direct, Miracast And Google Cast, Why Samsung TV may not see Honor 80 Pro, A LG OLED — require additional drivers. We also compiled unique compatibility table models Honor with popular TVs from 2020 to 2026.

Important: If your TV is older than 2018, the chances of successfully connecting via Wi-Fi are reduced by 60% Many budget models simply don't support modern wireless data protocols. But even in this case, there are workarounds, which we'll discuss below.

1. Checking the Basics: 5 Steps Before Setting Up

Before digging deep into the settings, make sure you meet the minimum requirements for a wireless connection. 9 out of 10 problems are decided at this stage.

• 📱 Updating phone software: Go to Settings → System → Software Update on yours Honor. Minimum version Magic UI for stable operation of Miracast - 4.0 (for 2021 models and newer).
• 📺 TV firmware: On Samsung check the version in Support → Software Update, on LG - V All settings → General → Software update. Outdated firmware may not support WFD (Wi-Fi Display).
• 🔄 Restarting devicesUnplug your phone and TV for 30 seconds. This will reset the network module cache.
• 📶 Airplane mode: Turn it off on your phone - it blocks all wireless connections, including Wi-Fi Direct.
• 🔌 TV power supply: Some televisions (eg. Xiaomi Mi TV 4S) disable the Wi-Fi module in power saving mode. Switch the power to the mode Maximum performance.

If the connection does not work after these steps, proceed to the next section. Special attention Pay attention to the model of your TV - some brands (for example, Philips with firmware versions up to 2022) require manual activation Miracast through the engineering menu.

⚠️ Warning: On TVs Sony Bravia 2019–2020 function Wi-Fi Direct This may interfere with your home network connection. Disconnect the TV from the router before use.

2. The Difference Between Wi-Fi Direct, Miracast, and Google Cast: Which One to Choose for Honor

Many users confuse these technologies, even though they work differently. Let's figure out which protocol is best for your model. Honor:

For most users Honor the optimal choice is Miracast, as it supports full screen transmission (unlike Google Cast). However, on TVs Samsung better to use Wi-Fi Direct via function Screen Mirroring - it works more stably with firmware Tizen.

How to check what protocol your TV uses?

1. On LG: Settings → Networks → Wi-Fi Direct (if any) or Screen → Wireless Display (Miracast).
2. On Samsung: Settings → General → Screen Mirroring.
3. On Android TV (Sony, Philips): Settings → Display & Sound → Wireless Display.

Critical error: If your Honor can't find the TV using any protocol, the problem may be in lack of WFD support in the firmware kernelThis is relevant for models released for the Chinese market (for example, Honor V40 without global firmware). The solution is to install Google Play Services manually through APKMirror.

3. Step-by-step instructions: how to connect Honor to TV via Wi-Fi

Let's consider a universal algorithm for most models Honor (relevant for Magic UI 4.0–7.0). If your phone is older than 2019, some points may differ.

Step 1: Activate Miracast on your phone

1. Open Settings → Connections → Wireless Display (or Screen projection (on older versions).
2. Turn on the slider Wireless display.
3. Click Search for devices — the phone will start scanning for available TVs.

Step 2: Setting up your TV

Instructions for popular brands:

• 📺 Samsung: Source → Screen Mirroring (press the button on the remote control Source).
• 📺 LG: Settings → Networks → Miracast or Screen → Wireless Display.
• 📺 Android TV (Sony, Philips, Xiaomi): Settings → Display & Sound → Wireless Display.

Step 3: Connection and troubleshooting

If the phone has found the TV, but the connection does not occur:

1. Make sure your TV is in the "On" mode. Allow connection (sometimes confirmation via remote control is required).
2. If you are asked for a PIN code, try the standard combinations: 0000, 1234 or watch it in the TV menu.
3. In case of error "Unable to connect" Please reboot both devices and try again.

For models Honor With Magic UI 5.0+ (For example, Honor 70) the function is available Multi-screen:

1. Swipe down on the screen to open the notification panel.
2. Click on the icon Multi-screen (or Smart View).
3. Select your TV from the list.

⚠️ Warning: On TVs Xiaomi with firmware MIUI TV You may need to disable the feature Smart device search in the network settings - it blocks the connection of third-party devices through Wi-Fi Direct.

4. Common mistakes and their solutions

Even if configured correctly, the connection may not work due to hidden conflicts. Here Top 7 mistakes and ways to fix them:

• 🔴 "Device not supported": Your TV or phone is not compatible with the protocol. The solution is to use Google Cast via apps (YouTube, Netflix) or HDMI adapter.
• 🔴 "Connected, but black screen": On Honor With Magic UI 4.0 needs to be turned on Sound transmission in the settings Wireless display.
• 🔴 "Constant disconnections": The problem is in the frequency interference 5 GHzSwitch to . 2.4 GHz in the TV's Wi-Fi settings.
• 🔴 "The TV is not visible in the list.": On some Honor (For example, Honor 10) you must first connect to any Wi-Fi network, even without the Internet.
• 🔴 "Authentication Error": Reset network settings on your phone: Settings → System → Reset → Network reset.

If none of the methods helped, check regional restrictions: some models Honor for China they block Miracast due to local standards. The solution is to change the region in the phone settings. Europe or Global.

dumpsys media.router

5. Compatibility table: Honor + popular TVs

We tested the connection of various models Honor Compatible with popular TV brands. The results are in the table below (✅ — stable, ⚠️ — potential issues, ❌ — not compatible).

For models Honor older than 2018 (Honor 7X, Honor 9 Lite) Wi-Fi connection is often impossible due to the outdated chipset Kirin 659/960In this case, there are two options left:

1. Use HDMI adapter (Type-C/USB-C → HDMI).
2. Install Google Chromecast or Mi TV Stick into the HDMI port of the TV.

⚠️ Warning: On TVs Sony Bravia 2021–2023 function Wi-Fi Direct may be disabled by default for security reasons. To enable it, go to Settings → Security → Advanced → Enable Wi-Fi Direct.

6. Alternative connection methods if Wi-Fi doesn't work

If wireless connection is fundamentally unsuccessful, consider alternative methods:

• 🔌 HDMI adapter: For Honor With USB-C an adapter will fit USB-C → HDMI (For example, Baseus or UGREEN). Price - from 800 ₽, no delays.
• 📶 Chromecast/Mi TV Stick: Connects to your TV's HDMI port and works via Wi-Fi. Supports Google Cast And Miracast.
• 🖥️ DLNA: For transferring photos/videos (but not the screen!) via the home network. Honor use the app Files → Connect to TV.
• 🕹️ Steam LinkIf you have a gaming PC, you can stream your screen. Honor through Steam on TV.

For owners Honor Magic 4/5 there is another option - wireless docking station (For example, Huawei Wireless Projector). It creates a separate network for transmitting images without delays, but costs from 5,000 rubles.

7. Diagnosing hardware problems

If none of the software methods helped, the problem may be in ironHere's how to identify it:

• 📡 Wi-Fi module of the phoneTry connecting to a different network. If your phone doesn't have Wi-Fi at all, the module is faulty (repairs start at ₽2,000).
• 📺 TV antenna: On LG OLED And Samsung QLED The Wi-Fi antenna may be damaged. Check if your Smart TV (YouTube, browser) is working.
• 🔋 Chipset overheating: On Honor With Kirin 980/990 switches off when overheated Wi-Fi DirectLet the phone cool for 10-15 minutes.
• 🔌 USB port power: On some TVs (for example, Philips 6000 series) The USB port must be active for it to work Wi-Fi DirectConnect the flash drive - if it is not detected, the port is faulty.

To check the Wi-Fi module Honor enter into the engineering menu:

##2846579## → ProjectMenu → Network Setting → Wi-Fi

If the status indicates Wi-Fi error or Mac address: unknown — the module is faulty.

Cost of repairs:

• Replacing the Wi-Fi module Honor: 1 500–3 500 ₽.
• TV antenna repair: 2,000–6,000 ₽ (depending on the model).
• Cleaning connectors from oxidation: 800–1,500 ₽.

⚠️ Attention: On phones Honor with water protection (for example, Honor Magic V2) Disassembling the Wi-Fi module yourself to check it will void the warranty. Contact authorized service centers only.

FAQ: Frequently asked questions about connecting Honor to TV