Wireless printing is the standard for modern office and home use, eliminating the need to pull cables or constantly switch USB cords between computers. Model Samsung Xpress M2070WDespite its age, the Wi-Fi module remains a reliable solution thanks to its built-in Wi-Fi module. However, initial activation often presents difficulties for users. Unlike newer devices, there's no touchscreen for quickly selecting a network, forcing users to rely on button combinations and specialized software.
In this article, we'll cover all available methods for connecting your printer to a router, from automatic driver installation to manually entering settings through the control panel. You'll learn how to avoid common errors when the device doesn't see the network, and how to activate the mode. Wi-Fi Direct to print photos directly from your phone without using a router.
Before beginning software setup, ensure that the router itself is working properly and that the computer or laptop you'll be using for setup is already connected to the same wireless network to which you plan to connect the printer. This is critical, as the installation package searches for the printer on the local network.
Preparing for installation and choosing a connection method
The process of integrating a printer into a wireless network begins long before you even open the installation file on your computer. The first step is physically placing the device: make sure M2070W The router must be in a strong signal area, ideally within line of sight of the router or through a single non-load-bearing wall. Walls with reinforced concrete or a thick layer of concrete can significantly weaken the signal, leading to connection interruptions when printing large documents.
There are three main ways to activate the wireless module in this MFP. The first and most reliable is to use the installation disc or a driver downloaded from the official website, which will automatically detect the device and transfer the network settings to it. The second method is to use wireless technology. WPS, if your router supports this feature and has a corresponding button. The third option is manual configuration through the printer's control panel, which requires careful password entry.
⚠️ Important: Before starting setup, be sure to remove the USB cable from your computer if it was previously connected. Installing drivers in USB mode and then attempting to switch to WiFi without reinstalling often leads to port conflicts.
It's also worth finding out the encryption type of your network in advance. Modern routers use the standard WPA2-PSK or new WPA3, which are supported by this printer, but older protocols like WEP may require separate activation in the router settings. If you don't know your WiFi password, find it on a sticker on the bottom of the router or in your contract with your ISP.
Automatic setup via Samsung drivers
The preferred method for most users is to use the official software. It not only installs the necessary drivers for printing and scanning, but also launches a wireless network setup wizard that takes care of all the complex work. You'll need to download the package. Samsung Unified Driver from the official support website, as the included disk may contain an outdated version of the software.
After launching the installer, select the "Wireless Network Connection" installation type. The program will prompt you to connect the printer to the computer via a USB cable only while transferring WiFi settings. This is standard procedure: the cable is used as a temporary bridge to transfer the SSID and password from the router to the printer. Once the printer confirms the connection to the network, the installer will prompt you to disconnect the cable.
During the installation process, you will see a list of available wireless networks. Select your network from the list and enter the password. If the program cannot find the printer even with the cable connected, check that the Ready light on the device panel is lit. Sometimes you may need to press and hold the Stop/Reset button for a few seconds to restart the network module.
☑️ Checklist for a successful installation
It's important to monitor the on-screen messages during the process. If prompted to add the device to the system, be sure to agree. Once the installation is complete, a printer status bar will appear in the system tray, indicating the WiFi signal strength. If the signal strength is low (one bar), consider moving the router and printer closer together.
Using the WPS button for quick connection
Technology Wi-Fi Protected Setup (WPS) Allows you to connect a device to the network without entering a password, simply by pressing a button on the router and printer. This is the fastest method if your router has a physical WPS button or a web interface option. To begin, press and hold the WPS button on your router for 2-3 seconds until the WPS indicator starts blinking.
Then within 2 minutes go to the printer Samsung M2070WOn the control panel, press the "Direct" button (or the button with the WiFi icon) for more than 5 seconds until the wireless network indicator starts blinking rapidly. The printer will automatically search for a router with WPS enabled and establish a connection.
The process takes about a minute. If the connection is successful, the printer's WiFi indicator will glow solid blue (or green). If the indicator continues to flash or goes out, the connection timeout has expired or the router doesn't support this method. In this case, you'll need to revert to driver installation.
| WiFi indicator status | Meaning | User action |
|---|---|---|
| Turned off | The WiFi module is turned off | Press the WiFi button on the panel |
| Slow blinking | Searching for a network or setting up | Wait for completion or check your router |
| Fast blinking | Data transfer / WPS | Do not turn off the power of the device |
| It's on constantly | Successful connection | You can start printing. |
Manual setup via control panel
If automatic installation isn't possible, you can configure the network directly using the buttons on the MFP. This method requires careful attention, as character entry is performed using a single button that cycles through letters. Press the button. Menu on the control panel, then use the navigation buttons (left/right arrows) to find the item Network or Wireless.
In the wireless network menu, select the option Settings and press OKNext, you'll need to find your network in the list of available SSIDs. If the network is hidden, select the option to manually enter the name. After selecting the network, the printer will ask for a password. Enter the password using the navigation buttons: press the right or left arrow button to change the character in the current position, and the OKto move to the next character.
⚠️ Important: When entering your password, be sure to use the correct uppercase and lowercase letters. Uppercase and lowercase letters are entered by switching the mode (usually by pressing the case button or by long-pressing). A single letter error will prevent you from connecting.
After entering the password, confirm the action. The printer will attempt to obtain an IP address from the router. If successful, a successful connection message will appear on the screen, and the WiFi indicator will turn solid. It is recommended to immediately print a network configuration report to determine the printer's IP address for further use.
Printing from a smartphone via Wi-Fi Direct
One of the most useful features of the model M2070W is support Wi-Fi DirectThis mode allows you to create a direct wireless connection between your smartphone (Android or iOS) and the printer without a router. This is ideal for quickly printing documents or photos when visiting someone or in areas without access to the main network.
To activate this mode, press the button Direct on the printer's control panel and hold it until the lights start flashing. On your phone's screen, a network with a name beginning with [DIRECT]-Samsung_M2070_SeriesConnect to it. The default password is usually located on a sticker on the printer body or can be found by printing a configuration report.
After connecting your phone to the printer's network, open a document or photo, select "Print," and find your printer in the list of available devices. If your phone doesn't see the printer, make sure you're not using mobile data (3G/4G) while searching, as some operating systems block local network device searches when mobile data is active.
Diagnosing problems and resetting network settings
Even with proper setup, situations may arise where the printer "disappears" from the network or stops responding. Common causes include a router changing its IP address (if a static IP isn't reserved) or interference in the airwaves. The first step should always be to reboot both the router and printer: unplug both devices from the power outlet for 30 seconds, then plug in the router, wait until it fully boots up, and only then turn on the printer.
If the problem persists, you may need to reset the printer's network settings to factory defaults. To do this, click the button Menu, go to the section Network, then select Clear Settings or Reset NetworkAfter the reset, the printer will return to the state it was in immediately after purchase, and you will have to go through the WiFi setup procedure again.
It's also worth checking whether Windows Firewall or antivirus software is blocking communication with the printer. Try temporarily disabling the protection and performing a test print. If printing works, add the printer to your antivirus's exceptions list. In more complex cases, updating the printer's firmware can help. You can find this on the manufacturer's website, although this should be done with caution for the M2070W model.
Why can't my computer see my Samsung M2070W printer via WiFi?
Most often, the problem is that the computer and printer are on different subnets (for example, one network is 2.4 GHz, the other is 5 GHz, and the router is isolating them) or a firewall is blocking detection. Make sure both devices are connected to the same network SSID.
Can this printer be connected to a 5GHz network?
Model Samsung Xpress M2070W Only supports the 802.11 b/g/n standard, meaning it operates exclusively in the 2.4 GHz band. If your router is broadcasting networks with the same name for both 2.4 and 5 GHz, try temporarily separating them in the router settings or forcefully connecting to the 2.4 GHz network.
What should I do if I forgot my WiFi Direct password?
You can reset the Wi-Fi Direct password to the factory default. To do this, enter the printer menu, find the wireless network settings, and perform a reset (Reset Network). This will reset the password to the one found on the factory sticker on the device.