Multifunctional device Samsung M2070 remains a popular choice for small offices and home users due to its reliability and affordability. However, despite excellent printing performance, this model lacks a built-in wireless module, which often causes confusion among users expecting "smart" features. It's important to understand that for an organization wireless printing This MFP will require a USB port on your router or the use of an additional print server.
Setting up remote access to a printer requires careful preparation of your network equipment. You need to ensure that your router supports the feature. Print Server and has a corresponding interface for connecting peripherals. If your router lacks a USB port, the only solution is to purchase an external Wi-Fi adapter for the printer or use an old laptop as a print server.
In this article, we will examine in detail all possible integration options. Samsung M2070 to the local network. We'll cover setup via a router's USB port, configuring a static IP address, and driver installation methods that will allow all devices in your home or office to print documents without a direct cable connection.
Checking router compatibility and preparing equipment
The first step is a thorough diagnosis of your network equipment. Not every modern router is capable of operating as a print server, even if it has a USB port. This port is often reserved exclusively for connecting external hard drives or 3G/4G modems, so the functionality network printing may be software disabled by the manufacturer.
You need to log into your router's web interface by entering its IP address (usually 192.168.0.1 or 192.168.1.1) in the browser's address bar. After logging in, find the section for USB applications or peripherals. If you don't see options related to "Printer Support," "LPR," or "Raw Printing," your router doesn't support direct connection to the MFP.
⚠️ Attention: Before connecting your MFP to your router, be sure to update your router's firmware to the latest version. Manufacturers often add support for new printer models or fix printing protocol errors in firmware updates.
To ensure successful synchronization, make sure you have a working USB A-to-B cable on hand. The cable should be shielded and preferably short (no more than 1.5–2 meters), as long cables can cause data packet loss and unstable printing. Also, make sure your computer has the latest drivers installed. Samsung M2070.
Setting up a USB port on the router
After confirming compatibility, you need to configure the router itself correctly. Connect the MFP Samsung M2070 Connect the USB cable to the router's USB port. In the router's web interface, go to the USB settings section. Here, you need to enable the print server function. Depending on the router model (TP-Link, ASUS, Keenetic, Zyxel), the interface may differ, but the steps are the same.
Usually you need to select a printing protocol. network printers The most commonly used protocols are LPR (Line Printer Remote) or Raw (Socket 9100). The LPR protocol requires specifying a print queue (Queue Name), which is often set to "lp1" or "auto" by default. The Raw protocol is more versatile and doesn't require additional queue names, making it preferable for initial setup.
What should I do if my router doesn't see my printer?
If the router doesn't display the connected MFP in the list of USB devices, try changing the file system type of the flash drive (if connected) or rebooting the router with the printer already connected. Some router models don't support hot-plugging of USB devices and require the printer to be turned on before the router boots.
Setting the operating mode is important. Make sure the print server is enabled and running in a mode that allows access from the local area network (LAN). Some routers block access to the USB port by default for security reasons, so you may need to create an access rule or change the security level for USB applications.
Setting a static IP address for a printer
For stable network operation, it's crucial that your MFP's IP address doesn't change after each router reboot. If the router assigns a new dynamic IP address to the printer, computers will lose connection with the device, making printing impossible. The solution is to pin the address. static IP behind the printer's MAC address.
Find your device in the list of connected USB devices on your router. Samsung M2070 and copy its MAC address. Then go to DHCP Server -> Address Reservation (or LAN -> DHCP Server). Add a new rule by pasting the copied MAC address and selecting the desired IP address from your network range (e.g. 192.168.1.200).
| Parameter | Default value | Recommended value | Description |
|---|---|---|---|
| Protocol | Auto | Raw / LPR | Data transfer method |
| Port | 9100 | 9100 | Standard Print Port |
| Queue | - | lp1 | Queue name for LPR |
| Status | Disabled | Enabled | Server activation |
After saving the settings, reboot the router. Verify that the MFP is now accessible via the assigned IP address. This can be done by entering the address into the command line using the command pingIf there is a response, the network infrastructure is ready for operation, and you can proceed to installing the device on users' computers.
Adding a network printer in Windows
Now you need to configure your computer's operating system to work with the network device. In Windows 10 and 11, the process for adding a printer is slightly different than in older versions. Open "Settings" -> "Devices" -> "Printers & Scanners." Click "Add a printer or scanner."
The system will start searching for devices, but most likely it will not find yours. Samsung M2070 Automatically, since it's connected via the router's print server, not directly. At this point, click the link "The printer I want isn't listed." A manual installation window will open, where you can select "Add a printer by its TCP/IP address or hostname."
☑️ Driver installation checklist
In the "Name or IP address" field, enter the static IP address you reserved earlier. Uncheck "Query the printer and automatically select a driver" to speed up the process and avoid detection errors. Windows will attempt to detect the device. If prompted for the device type, select "Standard" and select "Generic" from the Manufacturer list, and "Network Card" or "Standard TCP/IP Port" from the Model list.
Configuring ports and installing drivers
A critical step is selecting the correct driver. Since the printer is physically connected to the router, Windows may attempt to install a generic driver that won't unlock the full functionality of the MFP, especially the scanner. You'll need to manually specify the path to the original driver. Samsung M2070.
In the port setup window, click the "Port Settings" button. Make sure the protocol is selected. Raw and the port 9100If you are using the LPR protocol, switch the mode to LPR and enter the queue name (usually lp1) that you configured in your router. Selecting the wrong protocol will result in the document being sent to the queue, but printing not starting.
⚠️ Attention: When installing drivers, disable your antivirus software during the installation process. System print library files are sometimes blocked by security software, resulting in the error "Driver not available" or "Installation error."
After selecting the driver (file .inf) Complete the installation. The system will create a new logical printer associated with the network port. It's recommended to immediately open the printer properties, go to the "Sharing" tab, and ensure that printing from other computers is allowed if you plan to use the MFP in the office.
Troubleshooting access and scanning issues
Users often encounter a situation where printing works, but network scanning is unavailable. This is due to the connection architecture: scanning protocols Samsung M2070 often require a direct two-way connection, which standard print servers in routers don't provide. Network scanning may require installing additional software. Samsung Easy Printer Manager and setting up scanning on the PC to which the printer is physically connected (if the sharing method is used), or using third-party software.
If printing is choppy or large documents freeze, try changing the data packet size. In the printer port properties (Options tab), look for the "Maximum Transfer Rate" setting or the buffer size. Reducing the data transfer rate can sometimes stabilize the connection with low-end routers that can't handle the data flow from the MFP.
It's also worth checking your Windows firewall settings. It may be blocking incoming connections from the printer, which are necessary for status messages (e.g., "Out of Paper," "Jam"). Add a firewall rule allowing incoming connections for the application. spoolsv.exe or by port 9100.
Alternative connection methods and pinouts
If your router absolutely doesn't support printers, there are alternatives. You can purchase a special Wi-Fi adapter (Print Server)—a small device with a USB port that connects to Samsung M2070 and broadcasts it to the network. Another popular solution is to use a single-board computer (such as a Raspberry Pi) with CUPS installed, which turns any USB printer into a powerful network resource with AirPrint support.
Another option is to keep the printer connected to one specific computer and share it using the Windows "Sharing" feature. However, in this case, the host computer must be turned on at all times, which is not always convenient or cost-effective. This method is good for a temporary solution, but not for regular office work.
To sum it up, connection Samsung M2070 Connecting to Wi-Fi is possible, but requires a compatible router or additional equipment. The key to success is properly configuring a static IP and selecting the correct port protocol. This will transform your wired MFP into a fully-fledged network device, accessible to all users on the local network.
Why doesn't the printer print after setting up Wi-Fi?
Most likely, the port protocol is incorrectly selected (LPR instead of Raw or vice versa) or the device's IP address has changed. Check whether a static IP is assigned to the printer's MAC address in the router settings, and ensure the correct port and IP are selected in the printer's Windows properties.
Can I scan over Wi-Fi with the Samsung M2070?
When connecting via a router's standard USB print server, network scanning is typically unavailable, as the router only transmits print data. Network scanning requires more complex solutions, such as setting up a scan server on a PC or using specialized adapters that support TWAIN over Network.
What USB cable do I need to connect to a router?
You'll need a standard USB Type-A to Type-B cable (the same one you use to connect a printer to a computer). The cable should be no longer than 2-3 meters to avoid voltage drop and signal loss, as routers are often sensitive to cable quality.
Did the network settings reset when you rebooted the router?
If you've correctly configured IP address reservation in your router's DHCP server, the printer's address will not change. However, if the IP address was assigned dynamically, it may change after a reboot, requiring you to recreate the printer port in Windows with the new address.