Smartphones of the series Honor 9XEMUI-based devices offer powerful mobile internet capabilities. The ability to turn a device into a full-fledged router is useful when traveling, on business trips, or temporarily without a wired internet connection. Modern devices support 4G/LTE standards, ensuring high data transfer speeds for connected devices.
However, despite the similarity of the interfaces, the access point setup process has its own nuances that are important to consider for stable operation. Incorrect configuration can lead to rapid battery drain or overheating. In this article, we'll cover in detail all the steps for activating tethering mode, setting up security, and optimizing power consumption for your device.
The algorithm of actions considered is relevant for most models of the brand, but the interface may differ slightly depending on the firmware version. EMUI It's constantly updated, adding new network management features. So, if you don't see the menu item, check for system updates.
Preparing your smartphone for modem mode
Before activating the hotspot, you need to make sure your device is ready to transmit data. First, check that you have a SIM card with an active data plan and network coverage in your location. Without a stable 3G or 4G signal, internet tethering will be impossible or extremely unstable.
It's also worth paying attention to the battery level. Hotspot mode is a power-hungry process that significantly increases power consumption. Battery The battery may drain faster than usual, so it is recommended to keep the phone connected to a charger or power bank during active distribution.
An important step is to check your mobile data settings. Make sure your mobile internet is enabled and working properly on your smartphone. To do this, try opening any webpage in your browser before starting the hotspot.
β οΈ Caution: When using tethering mode, your device may become hotter than usual. This is a normal reaction of the processor and communication module to increased load, but leaving the phone in direct sunlight or on soft surfaces (such as a sofa or pillow) is not recommended.
If you plan to connect multiple devices or transfer large amounts of data, it makes sense to close background apps on the Honor 9X itself. This will free up system resources and RAM, ensuring more stable operation of the access point.
βοΈ Ready for distribution
Activating the access point through system settings
The main way to enable this feature is in the system menu. You need to go to the settings section, which is usually marked with a gear. Next, find the item Wireless networks or Mobile network, where the connection parameters are hidden.
In the wireless connections menu, select the option Modem modeHere you will see a switch Portable Wi-Fi hotspotTurn it on. Your smartphone will then begin broadcasting a signal, and the network name (SSID) will default to your device model.
While Wi-Fi is enabled, the system may prompt you to set up a Bluetooth or USB modem. These options are useful if you need to connect a laptop without a Wi-Fi module or to save battery life, as a wired connection consumes less power.
You can use the control panel for quick activation. Swipe down from the top of the screen to open the notification shade. Find the icon Access point (often looks like two linked rings or a Wi-Fi icon with a key). If the icon isn't on the first screen, click the edit panel button and add it.
Setting up security and network name
By default, your network may be open or have a default password, which is a security risk. Anyone within range can connect to your internet, consuming your data. Therefore, the first step should be changing your password and encryption type.
In the access point menu, click on Wi-Fi hotspot settingsHere you can change SSID (network name) to any convenient one. It is recommended to use Latin letters to avoid connection issues with older devices that may not display Cyrillic characters correctly.
Be sure to set the security type WPA2 PSKThis is a modern encryption standard that reliably protects transmitted data from interception. The password must be complex and contain at least 8 characters, including numbers and uppercase and lowercase letters.
Some firmware versions offer an option to hide the SSID. If you enable this option, your network won't appear on the list of available networks on other devices. To connect, you'll need to manually enter the network name and password.
β οΈ Warning: Hiding your network name (SSID) is not a reliable security method. Experienced users can detect hidden networks using specialized scanners. Rely primarily on a strong WPA2 password.
Managing connected devices and limits
Functional Honor 9X allows you to control who exactly is connected to your network. There's a section in the access point menu Connected devicesThis displays a list of all gadgets, their MAC addresses, and the amount of traffic consumed.
You can manually block any unwanted device. To do this, simply click on the client's name and select the option BlockThis will immediately terminate the connection and prevent reconnection from that MAC address.
You can also configure a traffic limit. You can set a data cap, after which the hotspot will automatically turn off. This is a useful feature for plans with limited data plans.
| Parameter | Recommended value | Description of influence |
|---|---|---|
| Frequency range | 2.4 GHz | Maximum compatibility with all devices |
| Max. number of devices | 4-6 pcs. | Optimal for maintaining speed and battery life |
| Wi-Fi timeout | 10 minutes | Automatic shutdown when there are no clients |
| Traffic limit | According to the tariff | Protection from expenses |
Don't forget about the timeout. If no one connects to the access point for a specified period of time (for example, 10 minutes), the system will automatically turn off the Wi-Fi module. This helps save battery batteries if you forgot to turn off the distribution manually.
Using a USB modem for a PC
If you need to share internet with a desktop computer or laptop that doesn't have a Wi-Fi adapter, use a USB cable. This method also provides a more stable connection and allows you to charge your smartphone simultaneously.
Connect your Honor 9X to your computer using a high-quality USB cable. Your phone's menu will likely prompt you to select USB mode. Select Modem mode or USB modem in the connection settings.
A new device should appear in your network connections. Windows usually installs the necessary drivers automatically. If this doesn't happen, you may need to install HiSuite drivers or ADB components, although this is rarely necessary in modern operating systems.
The advantage of a USB connection is the absence of latency typical of wireless connections and lower smartphone heat generation. However, speed will be limited by the USB port's bandwidth and mobile network speed.
Problems with USB modem drivers
If your computer doesn't detect your phone as a modem, try using the original cable. Cheap cables often only support charging. Also, check Windows Device Manager for any unknown devices with an exclamation mark.
Common problems and solutions
Despite the system's reliability, users may encounter difficulties. One such issue is devices not detecting the access point. In this case, try switching the frequency range in the access point settings from 5 GHz to 2.4 GHz or vice versa, if this option is available.
Another issue is slow internet speeds on connected devices. This could be caused by a weak cellular signal where the smartphone is located. Try moving the Honor 9X closer to a window or to a higher location.
It's also worth checking whether your SIM card's data limit has been reached. Carriers often reduce speeds after a certain threshold is reached, making tethering virtually useless.
- π± Restart your smartphone - this helps clear network stack errors.
- π‘ Reset network settings to factory defaults in the settings menu.
- π Disable power saving mode, which may limit Wi-Fi performance.
- π Update your phone's firmware to the latest version via
Settings β System β Software Update.
If all else fails, the problem may be with your carrier. Some plans prohibit using your phone as a modem (tethering). Check the terms of your contract.
β οΈ Note: Carriers can track tethering usage by the TTL value. Bypassing this restriction requires complex root privileges, which may void your device's warranty.
The impact of Wi-Fi distribution on the battery and system
Constant operation in access point mode creates a high load on battery and the processor. The phone heats up, which can lead to throttling (decreased performance) and accelerated battery wear.
Try not to leave your hotspot on overnight unless absolutely necessary. If you need constant internet access on another device, it's better to use a wired connection or purchase a portable 4G router designed for this type of use.
Use original chargers. When actively tethering, power consumption is high, and a poor-quality charger may not be able to compensate for the power drain, causing the battery to discharge even when plugged in.
Monitor the device's temperature. If your phone gets too hot, take a break: turn off the hotspot and let the device cool down. This will prolong the life of its internal components.
Why doesn't the Honor 9X share the Internet via Wi-Fi?
Most often, the problem stems from the lack of mobile internet on the SIM card or in the hotspot settings. Check that the internet is working on the phone itself. Also, make sure the hotspot settings don't set the limit on connected devices to zero or that the "blacklist" isn't activated for all clients.
Is it possible to share Wi-Fi if the phone has a password?
Yes, having a lock screen password (pattern or fingerprint) does not affect the hotspot's operation. However, if the phone is locked and goes into deep sleep, the connection may be disconnected to save power. You can disable Wi-Fi disconnection when the screen is locked in the hotspot settings.
How many devices can be connected to Honor 9X at the same time?
Technically, the firmware allows for connecting up to 8-10 devices simultaneously. However, the actual number depends on the processor load and mobile internet speed. Connecting more than 4-5 devices may result in unacceptably low speeds on each device.
Does the operator charge an additional fee for internet distribution?
It depends on the terms of your tariff plan. Some operators offer unlimited data transfer, while others charge per gigabyte or require a special option. Still others simply block data transfer or reduce speed to a minimum. Check your operator account for details.