How to view or reset your Xiaomi router's Wi-Fi password: full instructions (2026)

Forgot the password for your home Wi-Fi, which is distributed by your router? XiaomiThis situation is familiar to many: a password was entered once during setup, and then stored in the device's memory for years. When you need to connect a new device or share the network with guests, remembering the password combination becomes impossible. Fortunately, the manufacturer has provided several ways to restore access—from simply reviewing the settings to resetting the router to factory settings.

In this article you will find all current methods obtaining Wi-Fi passwords on routers Xiaomi (including models Mi Router 4A/4C/4Q, AX3600, AX6000 and others). We'll look at options for different scenarios: when you have access to the web interface, when the router is connected to the app Mi Home, as well as what to do if you completely lose control of your device. We'll cover this separately. security measuresto prevent your network from becoming vulnerable to hacking after password recovery.

1. Standard method: password on the router label

The fastest method is to look up the factory password on the device itself. All routers Xiaomi Comes with a sticker on the bottom or back that states:

• 🔄 SSID (default Wi-Fi network name, eg Xiaomi_1234)
• 🔑 Password (factory password, usually 8-12 characters)
• 🌐 MAC address and serial number

If you've never changed your password since setup, this option will work 90% of the time. Please note: On some models (eg. Xiaomi Mi Router 4A Gigabit Edition) the password may be hidden under a protective layer - it must be carefully scraped off with a fingernail or a coin.

⚠️ Attention: If you changed your password through the web interface or application Mi Home, the information on the label will become outdated. In this case, proceed to the following methods.

2. View the password in the router's web interface

If your router is connected to the network and you can access its settings through a browser, use this method. To do this:

1. Connect your computer or phone to the router's network Xiaomi via cable or Wi-Fi.
2. Open your browser and type in the address bar 192.168.31.1 or miwifi.com.
3. Enter your login and password to log in (default - admin and the password from the label).
4. Go to the section Wi-Fi → Wi-Fi Settings (or Wireless network).
5. The password will be displayed in the field Wi-Fi password (may be hidden under the dots - click on the eye icon 👁️ to see the symbols).

If you have forgotten your web interface password, try the standard combinations:

• 🔐 Login: admin, password: admin
• 🔐 Login: root, password: empty or password from the label
• 🔐 Login: user, password: user

⚠️ Attention: On routers Xiaomi with firmware MiWiFi ROM (Chinese version) The interface may be in Chinese. To change the language, find the 🌐 icon in the top menu and select English or Russian.

Make sure your device is connected to the router|Disable VPN/proxy in your browser|Clear your browser cache|Try a different browser (Chrome, Firefox)-->

3. Password recovery via the Mi Home app

If the router is linked to an account Xiaomi (via app) Mi Home), you can view or change your Wi-Fi password directly in the mobile app. Instructions:

1. Open the app Mi Home on a smartphone.
2. Select your router from the list of devices (if it is not there, click Add a device and follow the instructions).
3. Go to Wi-Fi settings (or Wireless network).
4. The password will be displayed in the field PasswordIf it's hidden, click on the eye icon.

If the router is not displayed in Mi Home, it may not have been linked to an account. In this case:

• 📱 Make sure you are logged into the same account Xiaomi, which was used during setup.
• 🔄 Reboot your router (button Reset for 10 seconds) and try adding it again.
• 📡 Check that your phone is connected to this router's network.

4. Reset the router to factory settings

If none of the previous methods worked, there remains a radical method - hard reset (hard reset). This will return the router to factory settings, including the Wi-Fi name and password (they will be the same as on the label). All personal settings (including guest network, parental controls, and device priorities) will be lost!

Reset instructions:

1. Find the button on the back of the router. Reset (usually it is recessed into the body).
2. Take a paper clip or a toothpick and press and hold the button 10-15 secondsuntil the indicators start flashing.
3. Release the button and wait for the reboot (1-2 minutes).
4. Connect to the Wi-Fi network using the name and password from the label.

⚠️ Attention: On some models (eg, Xiaomi AX6000) The reset may take up to 5 minutes. Do not interrupt the process even if the indicators go out—wait until the light is stable. SYSTEM.

What should I do if the router doesn't turn on after a reset?

If after the reset the indicators are not lit or the router is not responding, try:

1. Turn off the power for 30 seconds, then turn it on again.

2. Connect via cable and check the IP address in the command line (ipconfig for Windows).

3. Use a different power supply (if available).

If the problem persists, the firmware may be faulty - you will need to reflash it TFTP (look for instructions on the forums) 4PDA or Xiaomi Community).

5. Alternative methods (for advanced users)

If standard methods don't work, you can try more complex options. These require technical skills and aren't suitable for all models.

Method 1: View the password via the command line (Windows)

If your computer has previously connected to this Wi-Fi network, the password may be saved. To retrieve it:

netsh wlan show profile name="NETWORK_NAME" key=clear

Instead of NETWORK_NAME Enter your Wi-Fi SSID. The password will be in the line Key content.

Method 2: Connecting via Telnet/SSH (for firmware-enabled routers)

On routers with alternative firmware (for example, Padavan or OpenWRT) you can connect via SSH and run the command:

cat /etc/config/wireless

Look for the line option key 'your_password'This method only works on custom firmware!

6. How to protect your network after password recovery

Once you have restored your Wi-Fi access, Be sure to change your password to a more reliable one. Follow these recommendations:

• 🔒 Use a password that is long at least 12 characters with a combination of letters (different cases), numbers and special characters.
• 🚫 Do not use personal information (dates of birth, names, phone numbers).
• 🔄 Change your password every 6-12 months.
• 📡 Disable the feature WPS in the router settings - it is vulnerable to hacking.
• 🛡️ Enable encryption WPA3 (or WPA2-PSK, If WPA3 (not supported).

We also recommend:

• 📋 Create a guest network for visitors (in the router settings) Guest network).
• 🔄 Update your router firmware to the latest version (section Update in the web interface).
• 📱 Link the router to your account Xiaomi V Mi Home for remote control.

⚠️ Attention: Passwords like 12345678, qwerty or password They can be hacked in minutes using specialized software. Don't skimp on security!

FAQ: Frequently asked questions about passwords on Xiaomi routers

Is it possible to find out the Xiaomi Wi-Fi password without resetting it if I forgot my web interface credentials?

Yes, if the router is linked to an account Xiaomi in the app Mi HomeLog in to the app—the password will be in the device settings. If you haven't linked your device, the only option is to reset it.

Why doesn't my Xiaomi router provide internet after a reset?

A reset returns all settings to factory defaults, including your ISP connection settings. You'll need to reconfigure WAN connection (Enter your internet service provider's information: connection type, username, and password). This information is usually specified in your contract or can be obtained from your provider's support team.

Is it possible to hack Xiaomi Wi-Fi if you forgot the password?

Technically possible, but illegal and unethicalHacking into other people's networks is punishable by law (Article 272 of the Criminal Code of the Russian Federation). For your devices, use legal methods (reset, web interface, Mi Home). If the router is not yours, contact the owner.

How to change the network name (SSID) on a Xiaomi router?

Go to the web interface (192.168.31.1), go to Wi-Fi → Wi-Fi Settings and change the field Network nameAfter saving, the router will reboot, and the devices will need to reconnect.

Why doesn't my Xiaomi router save my new password?

This may be due to:

• Firmware failure (try updating the software).
• Incompatible characters in the password (use only Latin characters, numbers and !@#$%).
• Conflict with other settings (reset the router and configure it again).

If the problem persists, check your router for hardware problems.