Modern LG TVs are no longer just devices for receiving broadcast signals, but have become powerful multimedia centers that require constant internet access. Without a global network connection, it's impossible to fully utilize the platform's capabilities. Smart TV, including streaming services, online cinemas, and software updates. Users often encounter the need for initial setup or re-entering data after resetting the router, and this process can seem confusing for a beginner.
operating system webOS, installed on most modern LG models, has its own interface and operating logic, distinct from Android TV or other platforms. Proper connection settings ensure stable data transfer, which is critical for viewing high-definition content. 4K and HDRIn this article, we'll detail a process that will allow you to reliably "remember" the network and avoid common connection errors.
Equipment preparation and compatibility testing
Before you begin setting up your TV through the menu, you need to make sure your network equipment is ready for use. Your router must be turned on, working properly, and broadcasting a signal within range of the receiver. If you're using a dual-band router, be sure to know which frequency (2.4 GHz or 5 GHz) you plan to connect to, as some older TV models may not be able to see the network. 5 GHz.
It's also important to check the date and time on the TV itself if it's been used before. An incorrect system clock can cause security certificate errors, causing the TV to formally "remember" the network but be unable to connect to LG servers or internet services. You may need a remote control for initial setup. Magic Remote or a standard IR remote control.
⚠️ Note: If your router is configured to secretly broadcast the SSID (network name), automatic detection will not work. In this case, you must find out the exact network name in advance and choose to enter it manually during setup.
Make sure you know the password for your wireless network. If the characters are complex, it's recommended to write them down in advance or have a device handy to copy the data from to avoid entering errors with the remote.
Step-by-step instructions for connecting via the webOS menu
The setup process may vary slightly depending on the operating system version installed (webOS 3.0, 4.0, 5.0, 6.0, or later). However, the general steps remain the same for all modern models. First, access the main settings menu using the corresponding button on the remote control.
On the remote control Magic Remote This is usually a button with a gear icon or a separate "Smart" button. On standard remotes, look for the "Settings" or "My Apps" button, which will bring up a quick access menu on the screen. Select "All Settings." Navigate further using the cursor or arrow keys.
☑️ Checklist before connecting
Once you've entered the full settings menu, go to the "Network" section. Here, the TV will prompt you to select a connection type. Since we're interested in a wireless connection, select "Wi-Fi Connection." The device will automatically scan for available space.
In the list that opens, find the name of your home network. If the list is long, you can sort it or enter the name manually. After selecting the desired SSID, a password field will appear. Be careful: letters are case-sensitive, and characters may be hidden by asterisks until confirmed.
Entering the password and saving the network settings
The most critical step is entering the password. The TV's input interface is implemented via a virtual keyboard, controlled by the remote's cursor. This can be inconvenient if the password is long and contains many special characters or numbers.
To speed up the process, switch between input modes (lowercase/uppercase letters, numbers, symbols) using the corresponding buttons on the screen. Some models support the function QWERTY keyboards, where the layout of the letters corresponds to their location on a standard keyboard, which makes typing much easier.
- 🔑 Carefully check each character, especially the number 0 and the letter O, which are easily confused on the screen.
- 👁️ Use the "Show Password" feature (eye) to visually verify that the entered data is correct before clicking OK.
- 💾 After successfully entering the password, be sure to check the "Connect automatically" or "Remember network" box so that the TV does not ask for a password every time you turn it on.
After confirming your entry, the TV will begin the network authorization process. If successful, a connection icon will appear next to the network name, and a signal strength indicator will appear in the corner of the screen. The system will automatically save the network profile to the device's memory.
Setting up a static IP and DNS for stability
In some cases, dynamic address allocation (DHCP) may not work correctly, leading to intermittent connection drops or long content loading times. If you encounter such problems, it might be worthwhile to static IP address and DNS servers manually.
To do this, in the network settings menu, where you selected the network, find "Advanced Settings" or "Advanced Wi-Fi Settings." Disable the "Automatic" (or DHCP) option and proceed to manual data entry. You'll need to enter the IP address, subnet mask, gateway, and DNS.
| Parameter | Example of meaning | Description |
|---|---|---|
| IP address | 192.168.1.150 | Unique address of the TV on the local network |
| Subnet mask | 255.255.255.0 | Determines the size of the local network |
| Gateway (Router) | 192.168.1.1 | Your router's address |
| DNS server | 8.8.8.8 | Google server address for quick search |
Using public DNS servers, such as Google (8.8.8.8) or Cloudflare (1.1.1.1), can often speed up Smart TV interface response and resolve issues accessing certain apps. After entering all parameters, click "OK" or "Apply," and the TV will reconnect with the new settings.
⚠️ Important: When manually entering the IP address, make sure it is in the same subnet as your router and does not match the address of another device in your home, otherwise an IP conflict will occur.
Using WPS for quick pairing
If entering the password manually seems too difficult for you or you don’t have the remote control at hand, you can use technology WPS (Wi-Fi Protected Setup). This method allows you to connect your TV to your router by simply pressing buttons, without having to type.
First, locate the physical WPS button on your router. It may be marked with an abbreviation or icon. On some router models, this function is activated through the web interface or the manufacturer's mobile app.
On your LG TV, find and select "WPS" in the Wi-Fi network selection menu. The system will prompt you to press a button on the router. After that, you have about 2 minutes to go to the router and press the WPS button (sometimes you need to hold it for 2-3 seconds).
What to do if the WPS button does not work?
If automatic pairing doesn't occur, the WPS feature may be disabled in your router's security settings or may not be supported by your model. In this case, return to manual password entry.
The TV and router will exchange encryption keys, and the connection will be established automatically. This is one of the easiest ways to remember the Wi-Fi password on an LG TV, especially if the password contains complex character combinations.
Solving common connection problems
Even if you follow all the steps correctly, situations may arise where the TV doesn't see the network or can't connect. One common cause is incompatible encryption standards. Make sure your router is running a modern security standard. WPA2-PSK or WPA3.
Another common issue is the TV's memory being full or a temporary failure of the network module. In this case, a full reset of the network settings or a reboot of the device can help. It's also worth checking if your router is set to filter by MAC addresses.
- 🔄 Perform a "Cold Boot": turn off the TV using the button on the body, unplug the power cord for 1 minute, then turn it on again.
- 📡 Check the distance: if the router is located far away or behind thick walls, the signal may be too weak for stable Smart TV operation.
- 🛠️ Update the firmware: If you can connect your TV to the internet via a cable or a hotspot on your phone, check for software updates.
If all else fails, try creating a guest network on your router with simplified security settings and connecting your TV to it. This will help diagnose whether the problem lies with the main channel settings.
FAQ: Frequently Asked Questions
Why doesn't my LG TV remember the network after turning it off?
This may indicate a problem with the TV's non-volatile memory or a software update is needed. Try a full factory reset (deleting all data) and reconfiguring the network. If the problem persists, the Wi-Fi module may be faulty.
Is it possible to connect to 5GHz Wi-Fi?
Most modern LG models (since 2016-2017) support the 802.11ac standard and the 5 GHz frequency. However, older models can only operate in the 2.4 GHz band. Check the specifications for your model on the official website.
How to find out the MAC address of the TV for filtering?
The MAC address can be found in the menu: Settings → All settings → Network → Wi-Fi Connection → Advanced Wi-Fi SettingsThe MAC address of the wireless interface will be listed there. Don't confuse it with the MAC address of the wired connection (if applicable).
What should I do if the keyboard doesn't appear on the screen?
Try pressing the Enter (OK) button on the remote control in the password entry field. If this doesn't help, restart the TV. Also, make sure the correct input method is selected in the accessibility or language settings.