How to connect Yandex Station to your TV via Wi-Fi: full instructions (2026)

Wireless connection Yandex Stations Connecting to a TV opens up new possibilities for voice control of multimedia, listening to music through TV speakers, and smart home integration. However, many users encounter difficulties setting up such a connection—especially when using different standards. Wi-Fi (2.4/5 GHz), TV manufacturer limitations, or speaker firmware features. In this article, we'll cover all current connection methods, from basic synchronization to advanced scenarios using DLNA And Bluetooth.

It is important to understand that Yandex Station (including models Mini, Lite, Max And 2nd generation) does not have a direct HDMI-output, so transmitting the image to the TV is only possible through intermediaries - a smartphone, router, or specialized applications. The main scenario is controlling the TV with your voice (via Alice) and outputting audio from the speaker to the TV speakers. We'll cover both options and also explain how to bypass common limitations (such as lack of support) Wi-Fi Direct on older models Samsung or LG).

1. Preparation: What to check before connecting

Before you begin setup, make sure your equipment meets the minimum requirements. Here are the key points:

• 📶 Network standards: Yandex Station only works with Wi-Fi 802.11 b/g/n on frequency 2.4 GHz (except Max, which supports and 5 GHz). If your TV is connected to the network 5 GHz, the column will not be able to "see" it directly.
• 🔄 Shared router: Both devices (Yandex Station And Smart TV) must be connected to the same local network. If you have a dual-band router, make sure both devices are on the same subnet (e.g., not split into 192.168.0.x And 192.168.1.x).
• 📱 Mobile application: You will need the official app to set it up. Yandex (available for Android And iOS). Make sure it is updated to the latest version.
• 🔊 Transfer protocol: To output sound from the speaker to the TV, you need support DLNA or Bluetooth (Depending on the TV model). Older TVs (before 2018) may not have these features.

If your TV does not support DLNA, but there is Bluetooth, you can use the column as an external speaker - we'll talk about this in in the relevant sectionAlso, check that the firmware on both devices is up to date; outdated software often causes connection errors.

⚠️ Attention: On TVs Sony Bravia 2019-2021 models may require disabling the feature IP Control in the network settings, otherwise Yandex Station will not be able to detect the TV on the local network.

2. Method 1: Connecting via the Yandex app (main method)

This is the most reliable and universal method that works on most modern Smart TV (on Android TV, webOS, Tizen). The instructions are valid for all Yandex Station models, including Mini And Max.

Steps to set up:

1. Connect the TV and speaker to the same Wi-Fi network.
   

   Make sure both devices are within range of the router. If you have dual-band Wi-Fi, temporarily disable the network. 5 GHz, to avoid conflicts.

2. Install the Yandex app on your TV.
   

   For Android TV (For example, Sony, Xiaomi, Philips) download it from Google Play. For LG webOS or Samsung Tizen use the built-in app store (LG Content Store or Samsung Apps).

3. Log in to one account.
   

   Log in to the app on your TV and the Yandex mobile app (on your smartphone) using the same account. This is necessary to sync your devices.

4. Add the TV to the list of devices.
   

   In the mobile app, go to the section Smart Home → Add Device → TVFollow the on-screen instructions. The system will automatically find the TV on your local network.

After successful connection, you will be able to:

• 🎤 Control your TV with your voice via Alice (for example, "Turn on Channel One" or "Turn up the volume").
• 🔊 Stream audio from Yandex Station to your TV speakers (if supported) DLNA).
• 📺 Launch video from Kinopoisk or YouTube straight from the column.

⚠️ Attention: On TVs Samsung With Tizen You may need to additionally allow access to the local network in the Yandex application settings (Settings → Security → App Permissions).

3. Method 2: Output audio from Yandex Station to your TV via DLNA

If your TV supports the technology DLNA (or Miracast), you can use it as a wireless speaker for your speaker. This is convenient for listening to music, podcasts, or radio through your TV's powerful speakers. This method works on most models. LG, Sony, Philips and some Samsung (except for budget series) Crystal UHD).

Setup instructions:

1. Enable DLNA on your TV.
   

   The path to the settings depends on the model:

   • LG webOS: Settings → Network → Share & Screen → DLNA
   • Sony Android TV: Settings → Network → Home Network → Enable DLNA
   • Samsung Tizen: Settings → General → External Devices → DLNA Devices

Connect Yandex Station to your TV as a speaker.

Tell Alice: "Connect to your TV as a speakerIf the devices are on the same network, the speaker should detect the TV and prompt you to connect. Confirm your choice on the TV (you may be asked to enter a PIN).

Check synchronization.

Play music on Yandex Station—the sound should come from the TV speakers. If there's no sound, check the TV volume and settings. DLNA.

If your TV is not detected, try:

• 🔄 Reboot the router and both devices.
• 📵 Temporarily disable the firewall on your router (sometimes it blocks DLNA-traffic).
• 🔧 Update TV firmware (on Samsung this often solves the problem).

4. Method 3: Connecting via Bluetooth (if Wi-Fi doesn't work)

If your TV does not support DLNA or you have problems with Wi-Fi, an alternative option is to use BluetoothThis method is suitable for:

• 📺 TVs with built-in Bluetooth (most models Sony, LG OLED, Xiaomi).
• 🔊 Yandex Stations Max And 2nd generation (they support Bluetooth 5.0).
• 🎧 Old TVs with external Bluetooth adapter (connects to the port USB or 3.5 mm).

Step-by-step instructions:

1. Turn on Bluetooth on your TV.
   

   Paths to settings:

   • LG: Settings → Sound → Bluetooth devices
   • Sony: Settings → Network & Accessories → Bluetooth
   • Samsung: Settings → Sound → Sound Output → Bluetooth Device List

Activate pairing mode on Yandex Station.

Tell Alice: "Turn on Bluetooth" The speaker will enter device search mode (the blue indicator will light up).

Connect the devices.

From the Bluetooth menu on your TV, select Yandex Station from the list of available devices. Confirm pairing (a PIN code may be required, usually 0000 or 1234).

After connection:

• 🎵 The sound from the speaker will be automatically transmitted to the TV (if "Use as audio device" is selected in the TV settings).
• 🎤 Alice's voice commands will work through the speaker's microphone, but TV control may be limited (depending on the model).

⚠️ Attention: On TVs Samsung series QLED 2020–2022 When connecting via Bluetooth, there may be a delay in sound (up to 0.5 seconds). This is due to the peculiarities of audio processing in TizenThe solution is to use DLNA or wired connection.

How to improve Bluetooth sound quality?

If the sound is choppy or distorted, try:

1. Reduce the distance between devices (maximum 5 meters).

2. Turn off other Bluetooth devices (headphones, keyboards) that may cause interference.

3. Select the codec in the TV settings SBC instead of AAC (if available).

4. Restart both devices.

5. Solving typical connection problems

Even with proper setup, errors can still occur. Let's look at the most common ones and how to fix them.

If the problem is not resolved, try:

• 🔄 Reset network settings on TV (Settings → Network → Reset).
• 📱 Reinstall the Yandex app on TV and smartphone.
• 🔧 Update your router's firmware (outdated software may block multicast-traffic required for DLNA).

6. Advanced scenarios: controlling your TV via Yandex Station

Once successfully connected, you can set up voice control for your TV. Here's what's supported:

• 📺 Channel Management: "Alice, turn on NTV", "Switch to the next channel".
• 🔊 Sound adjustment: "Turn up the volume on the TV", "Turn off the sound".
• 🎬 Launching applications: "Open YouTube on TV", "Launch Kinopoisk".
• 🔍 Search content: "Find the movie Interstellar on TV."

To set up voice commands:

1. Open the app Yandex on TV.
2. Go to Settings → Voice Assistant → Device Settings.
3. Select your TV from the list and activate the "Allow voice control".
4. Say test commands so that Alice remembers the users' voices.

Restrictions:

• On Samsung Tizen switching is not supported HDMI-sources by voice.
• On LG webOS Before version 5.0 there is no support for launching applications through Alice.
• Voice search only works in applications integrated with Yandex (Kinopoisk, YouTube, IVI).

7. Alternative connection methods (if nothing works)

If standard methods don't work, consider these options:

• 📱 Using a smartphone as a bridge:
  1. Connect your smartphone and TV to the same Wi-Fi network.
  2. Turn on Screen Mirroring (or Smart View) on TV.
  3. On your smartphone, start screen mirroring to TV, then connect Yandex Station to your phone via Bluetooth.
• 🖥️ Connection via Google Chromecast:
  1. Connect Chromecast to the port HDMI on TV.
  2. Set it up on the same Wi-Fi network as Yandex Station.
  3. Use the app Google Home to broadcast sound from the speaker Chromecast.

🔌 Wired connection (for Yandex Station Max):

1. Use a cable 3.5 mm → RCA to connect to the TV audio input.
2. In the TV settings, select the external audio source (Audio input).

These methods require additional equipment, but are guaranteed to work even on older TVs without Smart TV.

⚠️ Attention: When using Chromecast or Screen Mirroring There may be a delay in sound (latency). To synchronize video and audio, select the "Game" or "PC", which reduces buffering.

8. Frequently Asked Questions

Is it possible to connect Yandex Station to a TV without Wi-Fi?
Yes, but with restrictions:
• By Bluetooth (if supported by both devices).
• Via aux cable 3.5 mm → RCA (for audio transmission only).
• Through Chromecast or Apple TV (requires additional device).

Voice control of the TV will not work without Wi-Fi.

Why can't Yandex Station detect my Samsung TV?

Possible reasons:

• The TV is connected to the network 5 GHz, and the column is to 2.4 GHz (reconnect both devices to the same network).
• Disabled DLNA in the settings (Settings → General → External devices).
• The TV firmware is outdated (update via Settings → Support → Software Update).
• The router firewall is blocking multicast-traffic (temporarily disable it for the test).

How can I stream TV audio through Yandex Station?

This is only possible if:

1. Your TV supports audio output to external devices via Bluetooth or HDMI ARC.
2. You will connect the speaker as an audio device in the TV settings (Sound → Sound Output → Bluetooth/HDMI ARC).

Yandex Station can't directly "take" sound from the TV—only the other way around (from the speaker to the TV).

Does voice control work on Android TVs?

Yes, but with nuances:

• On Sony Bravia And Philips All basic commands are supported (channel switching, volume control, application launching).
• On Xiaomi Mi TV Voice search may not work in some applications (for example, Netflix).
• On Nvidia Shield additional configuration is required in Settings → Voice Search → Yandex Alice.

Is it possible to connect Yandex Station to a TV via USB?

No, directly - it's not possible. Port USB at Yandex Station it is intended only for power supply (at Mini) or service purposes. However, there is a workaround:

1. Connect to TV Bluetooth transmitter (For example, Avantek WBA-05) to the port USB or 3.5 mm.
2. Pair the transmitter with Yandex Station via Bluetooth.
3. In your TV settings, select external audio output.

This method allows you to transmit sound from the TV to the speaker, but not vice versa.