A modern fiber-optic terminal from MGTS is a multifunctional device that often operates 24/7, providing internet access to all devices in the home. However, there are situations when the user needs to forcibly deactivate the wireless module while leaving the wired connection active. This may be due to the need to reduce electromagnetic radiation at night, to limit children's internet access, or to reboot the radio module to resolve software issues.
The process of disabling a radio channel does not require any special technical knowledge, but it varies significantly depending on the model of your equipment. Terminals ZTE, Huawei And Eltex They have different control interfaces, and standard actions in one menu may lead to completely different results in another. It's important to understand the difference between completely disabling Wi-Fi and simply hiding the network name, as these functions address different security and accessibility concerns.
In this article, we'll detail the steps for all current subscriber device models provided by the provider. We'll cover standard methods via the web interface and also touch on the nuances of using the operator's mobile apps. You'll learn how to not only turn off the signal, but also how to do it correctly so as not to disrupt other services, such as IPTV or telephony.
Why might you need to disable your wireless network?
The main reason users seek a way to turn off Wi-Fi on an MGTS router is to reduce electromagnetic radiation levels in the bedroom. Even though the power of household transmitters is within safe limits, many people prefer to completely turn off the radio waves while sleeping for their own peace of mind and comfort.
Another common scenario is the need to strictly limit access for children or guests. If you want to ensure internet access only on your computer via a cable, while keeping smartphones and tablets offline, disabling Wi-Fi is the most effective and quick solution. This prevents background downloads of updates on phones, which can eat up data or reduce speed in critical apps.
⚠️ Attention: If you have a digital television (IPTV) service and your set-top box is connected to your router via Wi-Fi, disabling the wireless module will stop your TV from broadcasting channels. Make sure your set-top box is connected via an Ethernet cable before making any changes.
It's also worth mentioning the technical side of the issue. Periodically turning the radio module off and on helps clear accumulated software errors if the device begins to operate erratically. Unlike a full router reboot, this method allows you to terminate client connections without disrupting the router itself or losing PPPoE or VLAN settings.
Determining the model of your MGTS terminal
Before you begin setting up your device, you need to accurately identify the device installed in your home. Control interfaces vary dramatically across vendors, and finding the right option in a different menu can be time-consuming. MGTS most often installs equipment from companies Huawei, ZTE or Eltex.
The easiest way to identify the model is to look at the sticker on the bottom of the case. It will indicate the exact part number, for example, Huawei HG8245H or ZTE F670Information can also be found in the web interface: when you log in, settings are often displayed on the main page or in the "Status" section.
For ease of navigation, we've prepared a table that will help you quickly identify your device type based on its external features and specifications:
| Manufacturer | Typical models | Characteristic features of the interface | Body color |
|---|---|---|---|
| Huawei | HG8245H, HG8245Q | Blue or white and blue design, MGTS logo | White/Blue |
| ZTE | F670, F675 | A simple white design, often with external antennas | White |
| Eltex | NTP-2X, NTU-2X | Metal case, industrial look | Silver/Black |
| Sagemcom | Fast 2864 | Compact, often found in older tariffs | Black/White |
Understanding the exact hardware you have is critical. For example, in interfaces Eltex the menu may be hidden deep within the tabs, whereas ZTE It is prominently displayed. Do not attempt to apply instructions for one model to a device from another manufacturer—this may lead to confusion.
Login to the router control panel
To change wireless network settings, you need to access the device's administrative panel. This can be done through any web browser on a computer or smartphone connected to the router. It's important that the device you're logging in from has a stable connection to the router, preferably via a cable, to avoid losing connection while making changes.
Open your browser and enter the gateway's IP address in the address bar. For MGTS equipment, this is most often 192.168.1.1 or 192.168.100.1If the default address isn't suitable, you can find it in your computer's network card settings. After entering the address, the system will request authorization.
An important nuance arises here: standard logins and passwords (admin/admin) often don't work on MGTS equipment, as the provider uses unique credentials for each subscriber. These credentials are listed on the factory sticker on the bottom of the router in the fields User And Password (or PwdIf you changed the password yourself and forgot it, you will have to reset the device to factory settings.
⚠️ Attention: Don't confuse your Wi-Fi network password with the password for accessing the web interface (router settings). These are two different security keys. You need the administrator password to access the settings.
In some cases, especially on older firmware Huawei, you may need to use superuser mode. However, for the basic operation of disabling Wi-Fi, the default user privileges are usually sufficient. If you only see a limited set of menus, it's possible your data plan or hardware type doesn't allow for deep customization.
Instructions for Huawei routers (HG8245H and similar models)
Equipment Huawei is one of the most common on the MGTS network. Its interface is fairly logical, but has its own unique translation and layout features. After successful authorization, you'll be taken to the main status page.
To turn off the wireless network, find the tab in the top horizontal menu WLANIn the list that opens, select the item WLAN Basic Configuration (Basic configuration). This is where the global radio switches are located. You need to find the checkbox with the name Enable WLAN or Enable SSID.
Uncheck the box Enable WLANPlease note that some firmware versions have separate frequencies for 2.4 GHz and 5 GHz. If you want to disable Wi-Fi completely, you must uncheck the corresponding tabs or sections for each band. After unchecking the boxes, be sure to press the button. Apply (Apply) at the bottom of the page, otherwise the changes will not take effect.
☑️ Checking Wi-Fi Disconnection on Huawei
It's worth noting that after applying these settings, the Wi-Fi connection will be disconnected immediately. If you performed these steps from a smartphone connected over the air, you will lose connection to the router. To test the results, use a different device or switch to mobile data.
Settings for ZTE and Eltex devices
Routers ZTE have a slightly different interface, which is often designed in a more formal style. After logging in (usually at 192.168.1.1) you need to go to the top menu Network (Network), and then select the subkey WLAN. The following paragraph follows Basic (Basic).
In the window that opens, you will see a switch Enable WLAN or Radio Enable. Move it into position Disable or uncheck the corresponding box. Interface features ZTE The problem is that changes may take a few seconds to apply. Don't rush to reboot your device; give the system time to process the command.
For equipment Eltex (these are often black or silver metal boxes) the logic is similar, but the menu may be called Wireless or Wi-FiIn some firmware versions for MGTS corporate clients, access to these settings may be restricted. If you don't see the disable option, the configuration profile may have been remotely blocked by your provider.
What should I do if the Apply button is grayed out?
Sometimes the Apply Settings button remains grayed out. This can happen if there are unfinished processes in adjacent tabs or validation errors in other fields. Try refreshing the browser (F5) and repeating the action. If that doesn't help, use incognito mode.
4 GHz and 5 GHz may be in different subsections. Make sure you disable the radio channel on both frequencies if you want complete peace of mind from wireless signals.
Using the "My MGTS" mobile application
A modern way to manage your home network is with the operator's official app. It allows you to control many parameters without having to navigate complex web interfaces. However, the app's functionality may vary depending on the router model and software version.
Open the app and select your device from the list. Find the Wi-Fi section. Some interface versions have a convenient "Wi-Fi On/Off" toggle. This is the quickest way, but it doesn't work on all terminal types. If there's no toggle, your model doesn't support remote control of this feature via the cloud.
The advantage of using the app is that you can manage access remotely while away from home. For example, you can turn off your children's internet while you're away or reboot the network if it's down. But for more in-depth configuration, such as changing the channel or bandwidth, the web interface remains indispensable.
Don't forget that the "My MGTS" app also allows you to create guest networks. This can be a great alternative to completely disabling Wi-Fi: you can simply choose not to share the password for your main network and allow guests access to an isolated segment that can be easily disabled at any time.
Common problems and their solutions
Users often encounter a situation where the Wi-Fi network continues to broadcast after turning off. This can occur due to browser settings caching or because Guest Network mode, which is a separate logical channel, is active. Check your Guest Network settings and disable it separately.
Another common issue is the inability to save settings. If the "Apply" button doesn't work or the page constantly reloads, try switching browsers. Older MGTS router interfaces may not display correctly in modern versions of Chrome or Firefox. Try compatibility mode or a different browser. Internet Explorer (via Edge IE mode) if others don't help.
⚠️ Attention: Equipment interfaces and functionality can be updated remotely by the provider. If the menu items described above are missing, it may mean your firmware has been updated and the menu structure has changed. In this case, look for similar names.
It's also worth mentioning the issue of the radio module "sticking." Sometimes the software disable doesn't work correctly, and the Wi-Fi indicator on the device remains lit. In this case, the only solution is a full device reset using the button. Power or via the web interface (System Tools → Reboot). After turning on, the router will apply the new settings, and the network will not appear.
Frequently Asked Questions (FAQ)
Does turning off Wi-Fi affect wired internet speed?
No, disabling the wireless module does not affect the speed of a wired connection. In fact, on very old or weak routers, it may even slightly improve the stability of the wired network, as the device's processor no longer wastes resources servicing wireless clients.
Will the router's power consumption decrease?
There will be a reduction, but it's insignificant. The Wi-Fi radio module consumes only a fraction of the power from the main power supply. Most of the power is spent on the optical module (GPON) and the processor. Therefore, turning off the router at night to save power doesn't make much sense.
Is it possible to turn off Wi-Fi using the button on the router body?
Most MGTS router models (Huawei, ZTE, Eltex) do not have a physical button to turn off Wi-Fi. WPS This button is used for quick connection, and a long press usually resets the settings. Control is only possible via software.
Do I need to reconfigure my router after disabling Wi-Fi?
No, this is a reversible action. You can go to the same settings at any time and check the box. Enable WLAN Back. All other parameters (login, provider password, TV settings) will remain unchanged.
Will my smart home work if I turn off Wi-Fi?
If your smart home devices (lights, outlets, cameras) are connected directly via Wi-Fi, they will stop working and become inaccessible from apps. If they use a separate gateway (hub) connected via cable or the Zigbee protocol, they may continue to work, but cloud control may be disrupted.