Managing a wireless network on a home router is a basic skill that every user of equipment from a provider needs. ByFly. Often situations arise when temporary or complete disable the WiFi moduleFor example, to prevent unauthorized access, reduce electromagnetic radiation levels at night, or force all devices to use a wired connection. This can be done programmatically through the settings interface, without unplugging the router.
The process of deactivating the radio module doesn't require any special technical knowledge, but it's important to follow the steps carefully to avoid disrupting other important internet connection settings. In this article, we'll cover how to do this in detail. turn off WiFi on various router models ZTE, Huawei And TP-Link, which are most commonly used by your provider. You'll learn how to find the necessary settings in the web interface and understand the difference between a temporary shutdown and a full reset.
Before you begin making configuration changes, make sure your device (laptop or PC) is connected to the router. Ethernet cableIf you try to change your wireless network settings while connected via WiFi, you'll immediately lose connection to the router after applying the changes, and you'll have to re-establish access to the control panel. This is a common error that can be confusing for inexperienced users.
Preparing to change router settings
The first step before making any changes to the hardware configuration is physical connection. As mentioned, a wired connection is best for a stable setup process. Get a network cable. LAN, which usually comes with the router, and connect it to the port on your computer with the yellow port LAN on the back of the device ByFly.
After connecting the cable, you need to find out the IP address of the gateway used to access the control panel. By default, for most ISP devices, ByFly (brand Beltelecom) the address is used 192.168.1.1 or 192.168.0.1This information is also duplicated on a sticker located on the bottom of the router. The login and password for logging in are also listed there.
- 🔌 Connect your computer to the router using a cable.
LAN. - 🌐 Open your browser and enter the router's IP address in the address bar.
- 🔑 Enter your login and password (by default it is often
admin/admin). - 📱 Make sure the indicators on the router are steady.
⚠️ Note: If you have previously changed your router password and have forgotten it, you will need to perform a hard reset of the device to factory settings, which will require you to reconfigure your internet connection with your provider.
In some cases, the login address may be changed by the system administrator or the user themselves. If the default addresses don't work, you can find the current gateway using the Windows command line. Click Win + R, enter cmd and in the window that opens, type the command ipconfigFind the line "Default gateway" - the numbers listed there are the address you need.
Logging into the ByFly router web interface
Once you've entered the correct IP address in your browser, the system will request authorization. Router interfaces ByFly may vary depending on the model (ZTE F660, Huawei HG8245H, TP-Link), but the login process remains the same. In the window that appears, you'll need to enter your credentials. The default combinations are often listed on a sticker, but for security, it's best to change them.
If you see a page with a logo Beltelecom or ByFly, then you're on the right track. Some firmware versions may have the interface in Russian, while others may have it in English. Key terms such as Wireless, WLAN or Network, will be found everywhere, so knowing the basic terminology will make navigation easier.
If the page doesn't load, check if you have a proxy server or VPN enabled in your browser, which could be blocking access to local addresses. Also, make sure your computer's network card settings are set to obtain an IP address automatically (DHCP), otherwise the computer will not “see” the router.
What should I do if the login page doesn't open?
Make sure the cable is working properly and the LAN port lights are flashing. Try a different browser (Chrome, Firefox, Edge). Check if your antivirus software is blocking access to the local network. If all else fails, try resetting the router using the Reset button.
Disabling WiFi via Wireless (WLAN) settings
This is the main method that allows turn off WiFi programmatically, while maintaining the functionality of your wired internet and phone (if connected via a router). After successfully logging in, you need to find the section responsible for wireless networks. Depending on your firmware version, it may be called Network → WLAN, Wireless or simply WiFi Settings.
Within this section, look for the option responsible for activating the radio module. It's most often called Enable Wireless, Wireless Radio or WLAN 2.4G Basic Network SettingsTo disable the network, uncheck the "Enable" checkbox or select "Disabled" from the drop-down list. Don't confuse this with changing the network name (SSID).
| Router model | Path to the menu | Option name | Action |
|---|---|---|---|
| ZTE F660 | Network → WLAN → Basic | Enable WLAN | Uncheck the box |
| Huawei HG8245H | WLAN → 2.4G Basic Network Settings | Enable WLAN | Uncheck the box |
| TP-Link (old) | Wireless → Wireless Settings | Enable Wireless Router Radio | Select Disable |
| Eltex (ONT) | Wi-Fi → General | Enable Wi-Fi | Switch to Off |
After changing the parameter, be sure to click the button Apply or Save At the bottom of the page. The router may reboot the wireless module, and the WiFi connection will be lost immediately. If you're connected via cable, you'll still have access to the internet and the control panel. This is the safest option. deactivate radiation without physical intervention.
☑️ WiFi Disabling Checklist
Using Airplane Mode or Schedule
Modern routers, including some models used ByFly, offer more flexible settings than just "on/off". The function WLAN Schedule (WiFi Schedule) allows you to automatically turn off your wireless network at a specific time. This is the ideal solution for those who want to turn off WiFi at night without having to adjust the settings every evening.
To set up a schedule, find the section in the menu WLAN → WLAN Schedule or Time SettingsHere you can set the time intervals when the radio module should operate. For example, you can set it to operate only from 8:00 AM to 11:00 PM. The rest of the time, the router will operate automatically. block WiFi signal, which also improves the security of your network at night.
Some advanced users also use the "Airplane Mode" feature in the router itself, if such an option is available in the interface (often found in 4G/5G mobile routers from ZTE or Huawei). In stationary home terminals, the equivalent is setting a schedule or manually switching the WLAN status.
⚠️ Important: For the schedule to work correctly, make sure the current time and date are set correctly on your router. If the time is reset after a reboot, the WiFi shutdown schedule may not work. We recommend setting up time synchronization via NTP server in the system settings.
Alternative ways to deactivate the network
If access to the web interface is impossible or you're looking for a temporary solution, you can use physical methods. On the case of some router models ByFly (especially older versions ZTE or D-Link) there may be a physical button WLAN or WiFiA short press on it often turns the wireless module on or off, which is indicated by the corresponding indicator on the front panel.
Another radical but effective method is to use third-party utilities to manage the router if the provider has not blocked access to Telnet or SSHHowever, for the average user, this is a complex process requiring command line knowledge. The easiest way is to use the mobile app if your router model supports remote management via the cloud (for example, Huawei HiLink), although on the network ByFly This function is often blocked by the operator.
It's also worth mentioning the option to hide the network (Hide SSID). This doesn't turn off WiFi completely (radiation remains), but it makes the network invisible to third-party devices. You can find this setting in the section WLAN Basic Network Settings, unchecking the box Broadcast SSIDThis is a good security measure, but it is not a way to completely disable the module.
Common problems and their solutions
When trying turn off WiFi Users may encounter a number of difficulties. One of the most common issues is that the "Save" or "Apply" button is grayed out. This often means you're not logged in with administrator rights or are using an outdated browser. Try refreshing the page or entering incognito mode.
Another situation: you've disabled WiFi, but the network is still detected by devices. In this case, check if your second frequency band is working. Modern routers have dual-band (2.4 GHz and 5 GHz). By disabling one band, you might forget about the second one. Make sure you unchecked the box. Enable in the settings for both ranges (WLAN 2.4G And WLAN 5G).
If your router freezes after changing settings and stops responding, rebooting it will help. Unplug the device for 10-15 seconds, then plug it back in. After rebooting, check your settings—in most cases, they are saved even after a power outage, as they are stored in non-volatile memory.
FAQ: Frequently Asked Questions
Does turning off WiFi affect wired internet speed?
No, disabling the wireless module does not affect the speed of a wired connection. On the contrary, on older or weaker routers, it may even slightly reduce the load on the device's processor, theoretically improving the stability of the wired connection, although in practice the difference is often imperceptible.
Is it safe to keep WiFi turned off all the time?
It's completely safe. The radio module is designed for cyclic operation. However, if you plan to use the wireless network in the future, remember to turn it back on. Regularly turning it off and on via the web interface also won't harm the device.
What should I do if I lose internet access on my phone after turning off WiFi?
This is expected behavior. After disabling the module Wireless The router stops transmitting a signal. To reconnect to the network from your phone, you need to either re-enable WiFi in the router settings or connect your phone to the computer or router via a cable (if you have an adapter).
Is it possible to turn off WiFi using the Reset button?
Button Reset This resets all router settings to factory defaults. It is not intended for turning off Wi-Fi. Using the reset command will require you to reconfigure your connection settings with your ISP. ByFly, if they do not pull up automatically.
Will I lose phone service if I turn off WiFi?
No, a landline phone connected to the port POTS or Phone On the router, it will work regardless of the WiFi module's state. Telephony and wireless networking are different services operating on different frequencies and channels within the device.