Losing your wireless network password is a common problem faced by Ufanet subscribers. This can happen after purchasing a new gadget, having guests over, or simply forgetting something. In most cases, internet access can be restored without contacting technical support or calling a technician.
The recovery process depends on whether you remember the password for the router's administrative panel or whether access has been completely lost. Modern devices Ufanet, be it models from Eltex, Tenda or TP-Link, have similar operating logic, but may differ in interface. Understanding the basic operating principles local network will help solve the problem in a matter of minutes.
In this article, we'll cover all possible scenarios: from viewing saved passwords on a connected computer to a complete hard reset. It's important to follow these steps consistently to avoid disrupting your ISP connection.
Finding a password on an already connected device
The easiest way to find a forgotten password is to look it up in the operating system settings of a device that's already successfully connected to Wi-Fi. If you have a laptop or phone that remembers the network, you won't need access to the router itself. Operating systems store this data in encrypted form, but allow the owner to view it.
In the environment Windows You need to open your network settings. Right-click the Wi-Fi icon in the system tray and select "Network and Internet settings." Then go to "Network and Sharing Center" or "Change adapter settings." Find your wireless connection, right-click it, and select "Status," then "Wireless network properties."
In the window that opens, switch to the "Security" tab. This is where the "Network Security Key" field is located. By default, the characters are hidden behind asterisks. To see the actual password, simply check the "Show entered characters" box. The system may require administrator privileges to perform this operation.
⚠️ Important: If you are in a public place or using a corporate computer, make sure you have legal permission to view the security settings of that network.
For users of mobile devices based on Android (versions 10 and higher) and iOS (version 16 and above) the process is also simplified. On Android, simply tap the gear icon next to the network name, then select "QR code" or "Share." A text password is often written underneath the graphic code, or it can be scanned by another phone. On iOS, a similar function is available via the "i" menu next to the network name.
Login to the router control panel
If no devices are connected to the network or the password isn't saved anywhere, you'll need to access the router's settings. To do this, you'll need to access the administrator's web interface. Your computer or phone must be connected to the router via cable or Wi-Fi (if you know the network password, you'll need the settings password).
Open any browser and enter the device's IP address in the address bar. For Ufanet equipment, addresses are most often used. 192.168.0.1, 192.168.1.1 or 192.168.10.1The exact address is often indicated on a sticker on the bottom of the case. After entering the address, the system will ask for a username and password to log in.
Standard credentials are also found on the factory sticker. This is usually a combination admin/admin or admin/password from stickerIf you previously changed your control panel password and forgot it, you won't be able to access it without resetting the settings.
| Router model | IP address | Default login | Default password |
|---|---|---|---|
| Eltex NTU-RG-1401G-W | 192.168.1.1 | admin | admin |
| Tenda AC6 | 192.168.0.1 | admin | admin |
| TP-Link Archer C50 | 192.168.0.1 | admin | admin |
| ZTE F660 | 192.168.1.1 | admin | admin |
After successful authorization, you'll be taken to the main interface page. Interfaces may differ, but the logic remains the same. You need to find the section related to wireless networking. It may be called Wireless, WLAN, Wi-Fi or "Seamless Network".
What should I do if the page doesn't load?
Make sure the Ethernet cable is working properly and the connection indicator is lit. Try a different browser or incognito mode. Also, check that your network card isn't configured for a static IP address—it should be obtained automatically (DHCP).
Changing the security key in the interface
While in the Control Panel, find the Security subsection (Security) or "Wi-Fi Settings." This is where the current password and encryption type are displayed. For Ufanet home networks, the standard protocol is WPA2-PSK or more modern WPA3.
In the "Password," "PSK," or "Passphrase" field, you'll see the current character combination. You can simply copy it or replace it with a new one. When creating a new password, use a combination of letters and numbers at least 8 characters long. This will protect your network from unauthorized access by neighbors.
After entering new data, be sure to click the "Save" button (Save) or "Apply" (Apply). The router may reboot the wireless module. At this point, all connected devices will lose internet connection. You will need to reconnect them using the new code.
Some Ufanet router models allow you to create a guest network. This is a great way to share internet access with friends without sharing your main network password. Guest access can be limited by time or speed.
Hard reset
If the default passwords don't work and you've lost access to the control panel, the only solution is a full factory reset. This procedure will return the router to its out-of-the-box state. All your changes, including PPPoE settings, VLANs, and network names, will be erased.
On the back of any router there is a small hole with the inscription Reset or DefaultTo reset you need to:
- 🔌 Plug the router into a power outlet and wait for it to load.
- 📎 Find a paperclip or a thin object that fits into the hole.
- ⏱ Press the button inside the hole and hold it for 10–15 seconds.
- 🔴 Release the button when the indicators flash or the router starts rebooting.
After rebooting, the device will broadcast the network with the factory name (indicated on the sticker) and no password (or with the password from the sticker). You will be able to connect to it and set up the internet again. If you don't have the setup information (ISP login/password), this method may temporarily leave you without internet access until you call support.
⚠️ Note: Resetting your settings will delete your IPTV and telephony configuration. If these services are critical, it's best to first contact Ufanet technical support at 8-800.
☑️ Preparing to reset your router
Setting up the network after recovery
After you've restored access or reset your router, it's important to configure security correctly. Don't leave your network open. Go to your wireless settings and ensure encryption is selected. WPA2-PSK (AES)This is the most compatible and reliable standard at the moment.
Come up with a unique SSID (network name). Factory names like TP-Link_5G_1234 immediately tell attackers about the device model and possible vulnerabilities. Name the network neutrally, for example, Home_Net_5 or Apartment_WiFi.
It's also recommended to change the password for the router's web interface (admin). This will prevent unauthorized users from changing your network settings, even if they somehow connect to your Wi-Fi. Find the "System Tools" or "Administration" section to change the password.
If you use a dual-band router, set up separate network names for the 2.4 GHz and 5 GHz networks. This will allow you to manually select which frequency your devices connect to. Keep older devices on 2.4 GHz, and switch modern TVs and laptops to the faster 5 GHz.
Common problems and their solutions
During the recovery process, users often encounter technical issues. For example, the browser may return the error "Unable to access the site" when attempting to log in using an IP address. This is often due to the DNS cache or an IP address conflict.
Try clearing your browser's cache or using Incognito mode. Also, make sure your computer's network card doesn't have a static IP address assigned. It should obtain an address automatically. Check this in the TCP/IPv4 protocol properties.
Another problem is that the router doesn't save settings after a reboot. This could indicate a faulty internal memory or power supply. If the power supply voltage drops, the router reboots while saving the settings.
In some cases, your ISP may block third-party routers by binding your internet connection to the MAC address of the previous device. If you still can't connect to the internet after setup, call your provider and ask them to register the MAC address of the new router.
Why does the router get hot after a reset?
This is normal. When the processor is under full load during initial setup and file system indexing, the temperature may briefly increase. If the device is hotter than 60 degrees Celsius, check the ventilation.
FAQ: Frequently Asked Questions
Where can I find the password if the sticker on my router has worn off?
If the sticker is damaged, try the standard combinations: admin/admin, user/user, 1234. You can also try logging in through your provider's mobile app if your router supports it. In extreme cases, the only solution is to reset the router using the Reset button.
Is it possible to recover the password without resetting the settings?
Yes, if you have a computer already connected to this Wi-Fi network. In Windows, you can view the password in the wireless connection properties, as described at the beginning of the article.
What should I do if the Internet doesn't work after a reset?
Most likely, the PPPoE or VLAN connection settings have been reset. You need to enter the login and password from your Ufanet contract in the router settings. Without this information, the router will not be able to log into the provider's network.
Are Wi-Fi hacking apps safe to use?
No, such apps often contain viruses or steal your personal data. Recovering your network password legally through your device settings is the only safe option.
Should I change my Wi-Fi password regularly?
From a security standpoint, yes, this is a good practice, especially if you have a lot of guests. However, for a home network, a complex, unique password that you change every six months to a year is sufficient.