Modern televisions' multimedia capabilities have long since gone beyond simply receiving over-the-air channels, becoming full-fledged digital entertainment centers. For owners of these devices Ericsson, especially models based on the Android operating system, the primary task is to organize wireless access to the global network. Wi-Fi connection Provides access to streaming services, online cinemas, and the ability to install new applications.
Activating a wireless module may seem simple, but users often encounter various interface nuances or firmware specifics. In this article, we'll detail the steps that will allow you to quickly establish a connection to your router and enjoy content without the hassle of wires. It is important to understand that for Smart TV to function correctly on Ericsson devices, a stable connection with a bandwidth of at least 10-15 Mbps is often required.
Before you begin setting up, make sure your router is working properly and is transmitting a signal within range of your TV. If you've just purchased your device or have reset it to factory settings, the connection procedure is the first step in getting it ready for use. We'll cover both standard methods and troubleshooting common errors you might encounter along the way.
Checking hardware support and preparing equipment
The first step should always be to make sure that your TV model is Ericsson It is technically equipped with a built-in wireless communication module. Most modern smart TVs of this brand, especially those released in recent years, have an integrated Wi-Fi adapter, which doesn't require additional dongles. However, budget models or older models may only have a wired connection port or a slot for an external USB adapter.
Carefully inspect the back or side panel of your device. The presence of a built-in module is usually confirmed by the presence of a corresponding sticker or logo. Wi-Fi Ready / Wi-Fi Built-in On the box or in the instructions. If the package included a separate USB dongle, it must be inserted into the appropriate port before beginning the software setup.
⚠️ Warning: Using non-original USB Wi-Fi adapters may result in unstable system operation or a complete lack of response from the TV to the device, as the firmware may not include the necessary drivers.
You should also make sure your router is working properly and broadcasting in the ranges supported by your TV. These are usually standard frequencies. 2.4 GHz and, in newer models, 5 GHzIf your router has hidden your network name (SSID), you will need to know its exact name to enter it manually.
Basic wireless setup
Once you've verified the hardware, you can move on to the software. Operating system interface Android TVThe operating system, which underlies many Ericsson models, is unified, but may have slight visual differences depending on the firmware version. You will need a remote control to navigate the menu.
First, you need to access the main settings menu. This is usually done by pressing the gear icon or by using the Home and then select the appropriate section. Find the section responsible for the network, which is often called "Network and Internet" or simply "Network."
Next, follow this algorithm:
- 📶 Select the "Wireless networks" or "Wi-Fi" option and move the slider to the "On" position.
- 📡 Wait for the TV to scan the air and display a list of available access points.
- 🔑 Find the name of your home network in the list and tap on it to select it.
- ⌨️ Using the on-screen keyboard, enter the password for your Wi-Fi network, being careful to observe the letter case.
After entering the password, the system will attempt to establish a connection. A successful connection is usually accompanied by a beep and the appearance of a signal strength icon in the upper corner of the screen. If the system displays "Obtaining IP address" for an extended period, there may be an address conflict or a problem with the router's DHCP server.
☑️ Connection checklist
In some cases, especially when using complex passwords with many special characters, the TV may not read the data correctly. In this case, try simplifying the password in your router settings for the duration of the test or use the WPS method if supported by your router.
Using WPS technology for quick connection
Technology WPS (Wi-Fi Protected Setup) Significantly simplifies the process of connecting devices without having to manually enter a long and complex password. This is especially useful if you find entering characters using a remote control inconvenient or too time-consuming.
To use this method, your router must also support WPS, which is common among the vast majority of modern models. The router body usually has a physical button with a corresponding label or an icon of two arrows forming a circle.
The connection process is as follows:
- In the Wi-Fi settings menu on your Ericsson TV, select the "Connect via WPS" or "WPS Push Button" option.
- Immediately after this, press the physical WPS button on your router. You don't need to hold it down for long; a short press of 1-2 seconds is usually sufficient.
- The TV will automatically detect the router, exchange encryption keys and establish a secure connection.
This method eliminates the human factor when entering a password, but it has its own security limitations, so it's best not to use it in public places. For a home network where you control physical access to the router, this is a perfectly acceptable and fast method.
Setting up a static IP address and DNS
Sometimes, automatic network settings acquisition via DHCP can fail, leading to intermittent connection drops or the inability to access the internet despite a visible connection to the router. In such cases, experts recommend setting static IP address and alternative DNS servers manually.
To switch to manual configuration, find the "Advanced" or "IP Settings" section in the network selection menu. Change the mode from "Automatic (DHCP)" to "Manual" or "Static." You'll need to enter the following parameters, which depend on your local network addressing:
- 🌐 IP address: must be in the same subnet as the router (for example, if the router is 192.168.0.1, then the TV can be given 192.168.0.15).
- 🚪 Gateway: This is the address of your router through which you access the external network.
- 📏 Network prefix length: typically
24(which corresponds to the mask 255.255.255.0). - 🔍 DNS 1 and DNS 2: Here you can specify your provider's servers or public DNS, for example, from Google (
8.8.8.8) or Cloudflare (1.1.1.1).
Using public DNS servers often helps resolve issues when Wi-Fi is connected but pages or apps won't load. This may be due to your provider's DNS servers being slow or blocking certain requests.
| Parameter | Default value (DHCP) | Example of manual value | Description |
|---|---|---|---|
| IP address | Automatically | 192.168.1.125 | The unique address of a device on the network |
| Gateway | Automatically | 192.168.1.1 | Router address |
| Network mask | Automatically | 255.255.255.0 | Determines the size of the local network |
| DNS 1 | Automatically | 8.8.8.8 | Primary name server |
Be careful when entering numbers: one error in the last octet of the IP address or gateway will result in a lost connection. If you lose internet access after applying these settings, return the IP address acquisition mode to automatic.
Solving common connection problems
Even if all steps are followed correctly, users may encounter a situation where their Ericsson TV doesn't detect the network or constantly loses connection. One common cause is frequency band incompatibility. Many older or budget TV models only support the band 2.4 GHz, while modern routers can hide this network by default or work only in 5 GHz.
If your TV isn't detecting your network, try accessing your router settings and making sure the 2.4 GHz network is enabled. It's also a good idea to separate the network names for different frequencies by adding "_2.4G" and "_5G" to them to clearly identify which one you're connecting to.
⚠️ Please note: Router interfaces and TV operating system versions are regularly updated. Menu item locations and function names may differ from those described in the instructions. Always consult your router manufacturer's latest manuals.
Another problem can be a crowded communication channel, especially in apartment buildings where dozens of neighboring routers create interference. In this case, changing the broadcast channel in the router settings to a less crowded one can help (channels 1, 6, and 11 are considered optimal for the 2.4 GHz band).
Updating TV software
Equipment manufacturers regularly release firmware updates that fix network module bugs and improve compatibility with new equipment. If you're experiencing connection issues that haven't been resolved with standard solutions, first check for updates.
Typically this feature is located in the section Settings → About TV → System updateAn active internet connection is required to download the update. If Wi-Fi isn't working, you can connect the TV to the router using a LAN cable or use your smartphone as an access point with the same name and password as your home network (SSID cloning).
The update process may take 10 to 30 minutes. During this time, do not unplug the TV or interrupt the power supply, as this could cause irreversible damage to the device's software.
After successfully installing the updates and rebooting the system, try scanning for available networks again. Often, after an update, the TV will begin to see networks that were previously hidden, or the connection will be more stable.
Alternative ways to connect to the Internet
In situations where the built-in Wi-Fi module is faulty or not working properly, and running a cable isn't feasible, alternatives can be considered. One option is to use an external USB Wi-Fi adapter if your TV model supports specific chipsets (most often Ralink or Mediatek).
Another option is to create a hotspot on your smartphone. Modern phones can share the internet via Wi-Fi, and to the TV, it will appear as a regular home network. However, be aware of your mobile carrier's data plan, as watching high-definition video can quickly use up your data plan.
Portable 4G/LTE routers with a SIM card slot are also available. These devices are self-contained, compact, and can be an excellent solution for a summer house or rented apartment without wired internet.
Why doesn't my Ericsson TV see my Wi-Fi?
There are several possible causes: the Wi-Fi module is disabled in the settings, the router is operating in an incompatible range (5 GHz only), the distance to the router is too great, or there is a malfunction in the TV's network module that requires a reboot.
How do I reset network settings on my TV?
Go to the Settings menu, select "Network" or "General," and find "Network Reset" or "Delete Networks." This will reset your TV to its default settings.
Is it possible to connect an Ericsson TV to Wi-Fi without a remote control?
This is extremely difficult to do independently, without a remote control or USB keyboard, as menu navigation and password entry require cursor control. However, some models support smartphone control via a dedicated app.
What internet speed is needed for Smart TV?
To watch Full HD (1080p) video, a speed of at least 5-10 Mbps is recommended. 4K content requires a stable connection with a speed of 25 Mbps or higher.